Gas And Steam Turbine Articles & Analysis
-
University of Oregon Eugene, Oregon - 10.9 MW Gas and Steam Turbine CHP - Case Study
Quick Facts LOCATION: Eugene, Oregon MARKET SECTOR: University FACILITY SIZE: 23,634 Students FACILITY Total Electrical Energy Use: About 70 million kWh/year EQUIPMENT: 7,965 kW Solar Taurus gas turbine plus 3,000 kW steam turbine FUEL: Natural gas USE OF THERMAL ENERGY: Space, domestic hot water, sterilization, cooking, cage cleaning CHP TOTAL EFFICIENCY: 77.3% at full-fire TOTAL PROJECT COST: ...
-
Performance enhancement of GT–ST power plant with inlet air cooling using lithium bromide/water vapour absorption refrigeration system
Performance improvement techniques in power generation systems especially in gas turbine–steam turbine (GT–ST) combined cycle (CC) power plants by compressor inlet air cooling prove to be much improvising. In this work, the performance enhancement of CC power plant by inlet air cooling method using lithium bromide–water (LiBr/H2O) absorption refrigeration system powered by waste heat from heat ...
-
Project - Al Taweelah Power Plant, UAE
Boiler Water Treatment Located NE of Abu Dhabi, UAE, Taweelah Power Plant is a desalinization facility generating power with the help of gas & steam turbines. The power plant has been using polyamines to treat their steam boilers water for more than 14 years. 10 boilers x 600 t/h each 100 bar 540°C ...
By Fineamin SA
-
Performance of water/steam injected gas turbine power plants consisting of standard gas turbines and turbo expanders
The present study was done to investigate the performance differences in terms of thermal efficiency and specific power output of: combined cycle power plants with integration of low temperature regenerative heat, standard gas turbines operated in wet cycle mode, turbo expanders and steam turbines (here: alternatives); combined cycle power plants with integration of low temperature regenerative ...
-
Performance enhancement of GT-ST power plant with inlet air cooling using lithium bromide/water vapour absorption refrigeration system
Performance improvement techniques in power generation systems especially in gas turbine-steam turbine (GT-ST) combined cycle (CC) power plants by compressor inlet air cooling prove to be much improvising. In this work, the performance enhancement of CC power plant by inlet air cooling method using lithium bromide-water (LiBr/H2O) absorption refrigeration system powered by waste heat from heat ...
-
Combined Heat and Power (CHP) essentials
'CHP essentials' introduces the concept of power and heat 'production possibility sets', starting at the cradle of CHP, i.e., the thermal power generation plant. The latter always occasions 'fatal' heat that is either recovered (the 'merit' of CHP) or wasted (condensing). This split paves the way to defining the production possibility sets of CHP plants, shown for steam turbines, internal ...
-
Towards an European Fuel Cell Strategy
Head of Unit 'Energy Consumption Technology' At the onset of the Fourth Framework Programme for Community research and technological development including demonstration, a ten year fuel cell strategy for Europe was published in 1995 jointly by DG XII (Directorate General for Science, Research and Development) and DG XVII (Directorate General for Energy). The interest of the European Community ...
-
Sensitivity analysis and thermo-economic optimisation of Steam Injected Gas Turbine cycle design parameters
The purpose of the present work is to apply thermo-economic concepts to a Steam Injected Gas Turbine (STIG) electricity generation system and optimise it to indicate its economical advantages over a simple gas turbine. The system incorporates a combustion chamber, gas turbine, a compressor and a Heat Recovery Steam Generator (HRSG). A detailed sensitivity analysis was also performed to examine ...
-
Quantifying Combined Heat and Power (CHP) activity
In CHP plants without heat rejection facilities power, output is complementary to the recovery of heat, and all activity is cogeneration. CHP plants with heat rejection facilities can operate a mix of cogeneration and condensing activities. Quantifying the energy flows of both activities properly requires knowledge of the design power-to-heat ratios of the CHP processes (steam and gas turbines, ...
-
16 MWe - Natural Gas Fuel Tri-Generation Power Plant - Foxwoods Resort Casino - Case Study
OWNER Mashantucket Pequot Tribal Nation PROJECT ENGINEERING Syska Hennessey Engineering CONSTRUCTION MANAGEMENT Frank Zaino PRODUCT Two (2) Taurus 70 Gas Turbine Generator Sets With Heat Recovery Steam Generators CUSTOMER VALUE Energy Efficiency, Energy Independence, Reduced Carbon Footprint Sustainability and energy independence matter to the Mashantucket Pequot Tribal Nation in eastern ...
-
Combined Heat and Power Project Waste to Energy - Bay View Wastewater Treatment Plant - Case Study
OWNER City of Toledo Division of Water Reclamation LOCATION Toledo, Ohio PRODUCT Taurus'" 60 (5.7 MWe) Gas Turbines CUSTOMER VALUE Sustainability The Bay View Wastewater Treatment Plant in Toledo, Ohio processes over 2.5 million gallons of liquid waste per hour. The wastewater treatment plant produces flammable gas as a byproduct of its solid waste disgestjon process and is only two miles ...
-
Thermodynamic analysis of an integrated gasification combined cycle power plant: effect of nitrogen supply on system performance
A comprehensive thermodynamic analysis of a conceptual integrated coal gasification combined cycle power plant is presented. Energy and exergy efficiencies and exergy destructions of each sub–unit are calculated. The effect of nitrogen, which is supplied from the Air Separation Unit (ASU) of the gasification unit to the combustion chamber of the gas turbine (GT) cycle, on system performance is ...
-
Energy analysis of Brayton combined cycles
Economic and environmental considerations dictate the need for improved fuel utilisation in thermal power stations. To meet this goal, a design project was undertaken to assess the suitability for Combined Cycle application of different Gas Turbine (GT) cycles: Simple, Intercooled, Reheated, Intercooled/Reheated, Intercooled/Reheated/Regenerative cycle. Comparative figures for efficiency and ...
-
Comparative study of steam injection effects on operation of gas turbine cycles
In the present work, gas turbine cycles are modified with steam injection between the combustion chamber exit and the gas turbine inlet. Heat recovery steam generators, utilising the exhaust gases, provide these cycles with the injected steam at saturated vapour. The irreversibility of the different composing units of the cycles and the variation of gas properties owing to steam injection as well ...
-
NOx formation by steam injection using detailed chemical kinetics
In order to improve thermal efficiency of gas turbine system and better control NOx emission, the injection of steam into a gas turbine combustor has been employed. This study has used both chemical equilibrium calculations and the counterflow diffusion flame calculations of methane-air flame aiming at the elucidation of the NOx reduction mechanism due to the steam injection. The influence of the ...
-
Combined fuel cell?gas turbine plant for highly efficient power generation from renewable energy sources
The impact of renewable energy sources on today's energy supply substantiates the importance of hydrogen as an energy carrier. Hydrogen can be directly produced from solar energy and is considered a promising technology for temporary storage of electrical energy from wind turbines and photovoltaic systems. The generation of electrical energy from stored hydrogen requires highly efficient systems ...
-
Gas Turbine Steam Generator - Greater Toronto Airports Authority, Ontario, Canada - Project
The Once Through Steam Generator installed at the Toronto Pearson Airport to make the airport self sustainable. This unit produces 75 MW of power, while the total airport consumption is 38 MW. CPF’s scope of supply included the filter house, silencer and baffles, project management and detail drawings. ...
-
12MWe combined heat and power plant plant renovation - Case Study
OWNER Societe De Cogeneration Picardie Socopic OPERATOR Dalkia Groupe EDF LOCATION Amiens, France PRODUCT Mars 100 Gas Turbine CUSTOMER VALUE Improved Energy Efficiency Quick Pay Back on Investment Societe De Cogeneration Picardie Socopic (SO.COPIC) is a producer and distributor of steam and air conditioning. SO.COPIC was searching for the right solution to renovating their old and oversized ...
-
University of Massachusetts - 16 MW CHP Plant - Case Study
Quick Facts LOCATION: Amherst, Massachusetts FUEL: Natural Gas and Oil MAX CAPACITY: 16 MW POLLUTION CONTROL: Selective Catalytic Reduction (SCR) ENVIRONMENTAL BENEFITS: 99.3% SOx Reduction, 93% NOx Reduction, 96% CO Reduction AVERAGE CAPACITY FACTOR: ~ 75% ENERGY OUTPUT: 100,000 MWh per year IN OPERATION SINCE: April 2009 EQUIPMENT: 10 MW Solar Gas Turbine; 4 MW and 2 MW Steam Turbines USE OF ...
-
Technical and economic analyses of a hydrogen-fed gas turbine with steam injection and co-generation
Enel has been working on a hydrogen programme dealing with both hydrogen production and uses. The first phase deals with a hydrogen-fed, gas turbine-based co-generative cycle, in which steam injection in the gas turbine itself is adopted in order to couple high process efficiencies with very low nitrous oxide emissions. This paper presents the main results of the co-generative cycle thermodynamic ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you