Heat Exchanger Articles & Analysis
-
Exergetic and sustainability performance assessment of geothermal (ground source) ejector heat pumps
Although ejectors have been used in cooling/refrigeration and Heat Pumps (HP) applications for a long time, utilisation of Geothermal Ejector Heat Pump (GEHP) with Ground–Heat Exchanger (GHE) is a new idea, which has recently appeared in the literature. In this study, we model a GEHP system with a GHE in terms of exergetic aspects and apply our model to this system in the heating mode. The system ...
-
Performance analysis of the different Organic Rankine Cycles (ORCs) using dry fluids
This paper presents the first and second laws of thermodynamics analysis for organic Rankine cycles (ORCs), using dry organic fluids as the working fluids. The dry organic fluids for this study were R227ea, RC318, R236fa, Isobutane, R600a, R245fa, HFE7000, R123 and R113. Effects of the operating parameters such as turbine inlet temperature and pressure on the thermal efficiency, exergy ...
-
Thermal waste gas purification of siliceous organic compounds - Case Study
Example: Electrical industry Similar tasks: Electronic industry, Coating, Waste management When coating mica insulation materials, peaks of high contamination occur. The exhaust air containing organic compounds generates excess heat when oxidised in the regenerative thermal oxidiser (RTO). The properties of ceramic honeycomb blocks allow for the storage of that excess heat, for the production of ...
-
Enhancement of heat and exergy transfer inside double pipe heat exchanger with conical tube
Enhancement of heat and exergy transfers in double pipe exchangers with conical tubes is investigated. Different fluid combinations are selected. The momentum and energy equations for both fluids are solved mathematically and numerically. Both solutions are well matched. A parametric study including the effect of the thermal conductivity, thermal capacity and the tube to pipe diameters ratios is ...
-
The Straight Test Straight Tube Heat Exchanger - Case Study
The Client The client is an international integrated energy company with operations in 33 countries and are operating and developing their SAGD Assets in the Athabasca oil sands region. As in all SAGD operations the bitumen is brought to the surface mixed with particulate and water. The exchangers that do the initial cooling of this mixture are regularly fouled by the bitumen and particulate. ...
-
Case study - Carbon fibre: furnace & oven emission control
OverviewA carbon fiber company in China was faced with the challenge of selecting an emission control system for a new pilot line at their specialty fiber products facility. The line would include furnaces and three ovens, both of which would emit Carbon Monoxide (CO), Ammonia (NH3) and lethal amounts of Hydrogen Cyanide (HCN). ActionThe carbon fiber processor selected Anguil Asia because of ...
-
Third Party Report
Third Party Report for 40cells (150*150*300mm) Dense Alumina blocks. Our dense Alumina block shows: 1. thermal resistance temperature up to 1350?. 2. Al content is 62.84%. 3.water absorption is only 1.75%. Better distribution , better heat exchange-- Air-flow Hypodispersion Honeycomb. # #ceramic-media # #RTOmedia# 1. Product Size: 150*150*150mm 2. Material : Dense Alumina 3. Cells : ...
-
HycycleS: a project on nuclear and solar hydrogen production by sulphur-based thermochemical cycles
The European FP7 project HycycleS focuses on providing detailed solutions for the design of specific key components for sulphur-based thermochemical cycles for hydrogen production. The key components necessary for the high temperature part of those processes, the thermal decomposition of H2SO4, are a compact heat exchanger for SO3 decomposition for operation by solar and nuclear heat, a ...
-
Monitoring leaks in Heat exchangers - Case study
The Situation A California refinery produces xylene for use as commercial product and a precursor for petrochemical manufacturing. A primary component to the production of xylene is the isolation and purification of the chemical from a complex mixture of petroleum hydrocarbons. Steam based heat exchangers are used to process the xylene. Inherent to the design and rough duty heat exchangers face ...
-
ECOTECH CHINA-ERV/HRV, THENOW BIG SHOW
From 31st May 2018 to 2nd June 2018, ECOTECH CHINA-ERV/HRV was held in Shanghai National Exhibition Center. Shanghai Thenow Purification Technology Co.,Ltd, as a professional ERV/HRV manufacturer, booked one booth with area of 144㎡, booth no:5.2 H589 . We warmly welcome you to visit us to know our product. At this fair, we bring full series of our products. Ventilation series-We have energy ...
-
Immersion Heat Exchanger Coils for Corrosive/Ultrapure Chemicals -Choosing the Right Strategy
Introduction Today, Immersion Coils for heating and cooling are available in a variety of shapes, materials, designs and assemblies from various manufacturers. Polymer (Polyethylene, High Performance fluoropolymer), common and exotic metal alloys, pancake coil shapes, racetrack coils, grid structures, spaghetti tube U bends, welded and non-welded tube terminations, and tube ends connected to a ...
By Fluorostore
-
Energy and exergy analysis of a novel multigeneration system producing cooling, heating, power and pure water
A novel multi–generation system producing power, pure water, cooling and heating is proposed and analysed in detail. The system comprises a hybrid generator-absorber heat exchanger (GAX), the Organic Rankine Cycle (ORC), the absorption heat transformer (AHT) and a desalination system. For comparison purposes, three working fluids, including R123, Isopentane and n–butane are considered in the ORC. ...
-
Introduction to pinch technology
This material aims to give an overview of the fundaments of Pinch Technology. You will learn: • How to obtain energy targets by the construction of composite curves.• The three rules of the pinch principle by which energy efficient heat exchanger network designs must abide.• About capital-energy trade off for new and retrofit designs.• The best way to make energy saving process modifications.• ...
-
District Cooling Project – NUON Energy
District Cooling Project – NUON Energy District cooling Zuidoost Lob Amsterdam Nuon, part of Vattenfall, is a leading energy company that generates electricity and produces gas, heating and cooling, which is supplies to approximately 2.2 million households, companies and organizations in the Netherlands. In 2009 DESMI supplied energy efficient pumps to Nuon for a district cooling project ...
By DESMI A/S
-
A study on the thermodynamic analysis of a cascaded latent heat storage system over the single storage tank system for diesel engine waste heat recovery
This article presents the comparison of performance of a cascaded Latent Heat Storage (LHS) system over the Single Storage Tank (SST) system for heat recovery from a diesel engine. The energy and exergy saved and efficiencies during the charging process are evaluated and reported using actual system data. The discharge process is analysed with a case study and it is concluded that it is possible ...
-
The performance and emission characteristics of a diesel engine using preheated Kusum oil and Kusum diesel blend
Rapidly depleting conventional petroleum resources have prompted research for alternative fuels. Among various possible options for internal combustion engines, fuels derived from triglycerides (vegetable oils/animal fats) are a promising substitute for diesel fuel. Vegetable oils pose some detrimental characteristics like high viscosity and low volatility compared to diesel fuel. In the present ...
-
Harbin daoli - District Heating, China case study
In cooperation with ABB A/S Skovlunde and APV A/S Kolding DESMI A/S replaced large parts of the heating network in Harbin in China. Daoli is one of the seven districts of Harbin, the largest city in North East China with approx. 11 million inhabitants. It is known for its bitterly cold winters and is often called the “Ice City” – so therefore the city welcomed this district ...
By DESMI A/S
-
Case Study - Aluto Langano Power Plant Rehabilitation
Aluto Langano, Ethiopia – 2007 The Aluto Langano Geothermal Pilot Plant (ALGPP) is located on the Aluto volcanic complex of the Ethiopian Rift valley, close to the eastern escarpment between Lake Langano and Lake Ziway, some 200 km southeast of Addis Ababa. The Aluto volcanic complex is a young acidic system consisting of domes, lava, and pyroclastic interbeds. The geothermal field was ...
-
Products Used in Geothermal Heat Pumps and Solar Thermal Systems
As we continue to innovate and adopt cleaner energy technology, renewable energy technologies are increasingly vital in our quest for sustainable and efficient energy solutions. Among these technologies, coil heat exchangers play a crucial role in enhancing the performance and efficiency of systems like geothermal heat pumps (GHPs) and solar thermal ...
By Fluorostore
-
Kraft Canada Inc., Cobourg, Ontario, Canada
Industrial Dryer Application BOILER PLANT APPLICATIONThermal Energy designed, built and installed two FLU-ACE heat recovery systems to reduce plant energy costs. The first FLU-ACE tower was designed to recover 24 MMBTU/h (at peak) and 11 MMBTU/h (winter average) of otherwise wasted heat. Stainless steel breeching collects hot gases from three separate exhausts (two rice process dryers and one ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you