Turning waste into power
Economic, social and environmental factors dictate the necessity to manage waste to a new level. Wastewater plants, landfills, farms and food plants are all the owners of biomass that can be digested to produce biogas and turned into power.
Biogas can be burned directly in boilers for heat recovery and used for manufacturing, heating or cooling; this is the simplest method of direct biogas utilization on-site. Alternatively, it can be burned in engines to generate electric power (cogeneration). Combining hot water recovery with electricity generation, biogas can provide an overall conversion efficiency of 65-85%.
Apart from the main purpose of capturing biogas and using its energy, there are other advantages, such as:
- reducing emissions of landfill gas into atmosphere
- saving space required to store / utilize the waste
- removing odours and increase liveability of the surrounding areas
- utilizing a by-product to produce fertilizer
- attracting government funding for capital expenditure
There are three types of reactors used for anaerobic digestion of the biomass: covered lagoons, plug flow and complete mix reactors. Covered lagoons, though being the cheapest method, provide very low rate of conversion; they are also very smelly and require a lot of space. The plug flow method is only used for dairy manure as it requires a higher presence of solids. The material requires 20-30 days to convert the biomass.
Complete mix digesters, though implying higher initial investments, have significant advantages over the other types of reactors:
- high yield of biogas
- minimum footprint
- faster return of the investment
- greater bioenergy conversion
- reduction in solid waste
- better quality of bio solids
- pacification of volatile organic compounds
There are several mixing technologies used in the digesters, falling into two categories – liquid (sludge) mixing and gas mixing methods. Gas mixing diffuser method has numerous advantages over the liquid mixing, such as:
- compact & highly reliable
- energy efficient
- can be retrofitted
- no moving parts within the digester
- no need for decommissioning for routine servicing
- heat from compression of gas increases overall efficiency
- sizing & selection of equipment is based on digester design & floor geometry, allowing to select the most suitable option
- roof mounted manifold or ground level installation are possible
Anaerobic Digester systems in Australia are coming back into popularity due to further understanding of their benefits and the development of technologies. University of Adelaide collated the list of the suppliers of anaerobic digesters, which can be accessed here: https://sites.google.com/site/ausbiogas/suppliers
There are several organisations providing grants for construction of biogas plants and installation of digester systems, such as Low Carbon Australia and the Australian government’s Clean Technology Investment Program.
More and more companies announce their plan to invest in construction of anaerobic digestion plants, adopting waste-to-energy technology. Don’t let your business be left behind – start today, talk to experts, install a digester and mix the sludge to get biogas working for you.
Contact Hurll Nu-Way for digester mixing systems, biogas storage systems, gas compressor packages and other equipment for waste and water treatment.
References and further reading:
http://en.wikipedia.org/wiki/Anaerobic_digestion
http://www.adelaide.edu.au/biogas/
http://suscon.org/cowpower/biomethaneSourcebook/Chapter_2.pdf
http://floatingcovers.wordpress.com/2010/06/01/types-of-anaerobic-digesters-part-1/
http://www.slideshare.net/zakiabedeen/anaerobic-aerobic-digestion
www.wef.org/WorkArea/linkit.aspx?LinkIdentifier=id&ItemID=2250 White Paper on High Performance Anaerobic Digestion
http://www.biogas-info.co.uk/index.php/types-of-ad.html
http://www.omafra.gov.on.ca/english/engineer/facts/07-057.htm
Customer comments
No comments were found for Turning waste into power. Be the first to comment!