Bioenergy Product Applications For The Energy Industry

Gas detection requirements for power generation can vary widely based on the fuel source, which includes coal, oil, natural gas and nuclear. Regardless of the type of power facility, gas, fire and other hazards pose significant risk to employee safety and also can disrupt the supply of energy to commercial and residential customers. At Teledyne Gas and Flame Detection, our wide range of gas detection products meets the needs of all forms of power generation. Our century of experience, combined with advanced system ...

By Teledyne Gas and Flame Detection based in Arras Cedex, FRANCE.

By BMH Technology Oy based in Rauma, FINLAND.

Providing heat and cooling to homes and businesses makes up a quarter of the UKs greenhouse emissions and 51% of all energy used in Europe. Providing heat and cooling to homes and businesses makes up a quarter of the UKs greenhouse emissions and 51% of all energy used in Europe. This huge energy demand is usually met by using natural gas, instead of utilising low carbon solutions, such as hydrogen. Hydrogen can be blended with natural gas to decarbonise the gas we use for heating and cooling. By doing this, the ...

By ITM Power based in Sheffield, UNITED KINGDOM.

The responsible care for the environment and the availability of energy resources are increasingly taking centre stage. We are planning for this, and exceed your requirements in respect to heat exchange in the fields of energy and heating, and of power stations and environmental ...

By APL Apparatebau GmbH based in Hopfgarten, AUSTRIA.

With a unique portfolio of synthetic and natural graphite powders, conductive carbon blacks and custom-designed dispersions, Imerys is the leader in highly conductive carbon based solutions for mobile energy. Our graphite and carbon black products are consistently the high-performance conductive additives of choice for lithium-ion batteries, alkaline batteries, advanced lead acid batteries, zinc-carbon batteries, fuel cells and battery can ...

By Imerys based in Paris, FRANCE.

Ecogensus fuel is designed to replace coal, including for large volume users such as coal power stations. Ecogensus works with strategic developers, licensees and industry partners, who in turn can aggregate supply from multiple facilities. Ecogensus has deep expertise in combustion and plant conversion to alternative fuels. We support fuel customers in their evaluation and transition-planning processes as well as enhancing plant operations and improving ...

By Ecogensus LLC based in Hartford, CONNECTICUT (USA).

RDF is a fuel that is normally produced from waste with high calorific value. The original waste comes from households, industry and commerce and is processed for energy extraction; it is meant for co-incineration plants and replaces standard fuels (e.g. coal) in production plants for cement, power plants or other co-incineration ...

By Lindner-Recyclingtech GmbH based in Spittal/Drau, AUSTRIA.

Being driven by new legislation, the production of substitute fuel/alternative fuel will be gain momentum in the next few years, as well as the expected increase of recycling rate in municipalities. This means a lot of waste streams can be turned into alternative fuel for the coal fired power plant, cement and lime industry, biomass power plant, or other industrial boiler systems that still burning fossil ...

By eFACTOR3 LLC based in Pineville, NORTH CAROLINA (USA).

Testing and evaluating the quality of solid fuels, biofuels or secondary fuels are extremely important for the development of the industry. This applies both to their production, and to matching to different technologies. Thanks to modern scientific-research facilities, the laboratories of the Central Mining Institute have a comprehensive offer in this area, containing also the consulting and training services. ...

By The Central Mining Institute based in Katowice, POLAND.

Diesel engines typically convert no more than 33% of the energy contained in their fuel> in mechanical energy; about 25% of the energy input ends up in the cooling circuit and 33% in the exhaust gases (source: SAE ). So, it is evident how any intervention having the purpose of recovering at least a part of that large waste of energy is ...

By Zuccato Energia Srl based in Verona, ITALY.

Our Power Pallet biomass gasifier genset, when used with the grid-tie module, can be integrated with an existing 3-phase AC microgrid that includes intermittent electrical sources such as solar panels or small wind ...

By All Power Labs based in Berkeley, CALIFORNIA (USA).

Biomass energy from gasification, when done responsibly with waste wood or suitable agricultural waste such as nut shells, is often eligible for feed-in tariffs. However, biomass gasification has the advantage of being on-demand, so you can feed renewable energy onto the grid at times when wind and solar are not abundant, enabling you to avoid times when prices are too low due to an excess of wind or solar power being fed to the ...

By All Power Labs based in Berkeley, CALIFORNIA (USA).

Porvair Filtration Group have supplied a comprehensive range of filtration and separation products to the energy market for many years. We supply all major sectors of the power generation, distribution and supply industry, and our technology is used over a wide range of applications. These include, but are not limited to, the distribution of natural gas, conditioning and treatment of fuel oils, hydrocarbons and produced water, clean coal technologies, gasification and fuel cell technology. Our unrivalled ...

By Porvair - Filtration Group based in Fareham, UNITED KINGDOM.

By Grabner Instruments - AMETEK based in Wien, AUSTRIA.

Decarbonising the production of hydrogen, enabling a green transport fuel for trains. The ongoing trend to deploy more renewable power sources is a positive step towards reducing dependency on fossil fuels, but it causes some big issues for electricity grid operators. Balancing the grid is becoming more challenging, because renewables are increasing the temporal mismatch between supply and demand on all timescales. Conventional grid balancing techniques cause CO2 emissions (ramping up a gas or coal power plant), ...

By ITM Power based in Sheffield, UNITED KINGDOM.

Without controls, the combustion of solid fuel (coal) to generate power results in the emission of carbon dioxide (CO2), sulfur dioxides (SO2), nitrogen oxides (NOx), particulate matter, mercury, lead, cadmium, carbon monoxide, volatile organic compounds (VOCs), and arsenic. This is why it is critically important for solid fuel power plants to comply with stringent environmental standards by utilizing the optimal technologies for emissions management, environmental air pollution control, and fluid handling and ...

By CECO Environmental based in Dallas, TEXAS (USA).

New waste separation techniques are being implemented, and R&D programs focus on much more than waste-technology alone. The importance of biomass is recognized as a potential high-energy source for electricity and biogas. DMT’s ambitious approach is based on the principles of circular economy and cradle to cradle: waste products are in fact very valuable. We constantly investigate new ways in which to approach ‘waste’ from a different ...

By DMT Environmental Technology BV based in Joure (NL), NETHERLANDS.

Cocoa processing plants are often located in remote areas with little or no access to fossil fuels. The cocoa shells represent up to 10 % of the processing capacity of a typical plant, and often have no market value. VYNCKE offers combustion systems to convert the cocoa shells into a reliable supply of steam for the sterilization, roasting and grinding process. Our systems effectively address the challenges of cocoa shells as a boiler fuel, and even allow co-generation (combined heat and power ...

By VYNCKE based in Harelbeke, BELGIUM.

In thermal power plants, the combustion of fossil fuels or biomass water is converted into hot steam at up to ...

By Quadax Valves, Inc. - a Daughter Company of Müller Coax Ag based in Bristol, PENNSYLVANIA (USA).

Commercial buildings using steam for heating or cooling can generate power by replacing pressure reducing valves with the Microsteam� Turbine. The power system is configured in a vertical arrangement, minimizing the system's footprint allowing for installation in crowded equipment rooms where space is limited. Up to 275 kW of electrical power can be generated. The system is skid-mounted, with controls and a switchgear connected at the factory and is completely automatic, enabling unattended ...

By Energent Corporation based in Santa Ana, CALIFORNIA (USA).