Biogas Flaring Equipment Supplied In Australasia

The Pit Flare (or “Burn Pit”) is usually constructed of an excavation lined with a non-combustible lining of rock or refractory material. Often coupled with a pit liner, our pit flares can be a cost-effective combustion option for an environmentally conscious user. Our high efficiency burner produces a mixture of vapor and liquid from a single source. While most often designed to ...

Utility flares (DU series) are one of the most common flare designs use for applications with no smokeless burning requirements. They are also utilized in applications where smokeless flaring can be achieved without the use of an additional assist ...

Biogas flares are used to convert waste gases such as those produced from sewerage sludge treatment or from the fermentation processing of biomass (a renewable resource) in biogas plants. This technology turns these high potential energy gases into complete combustion for cleaner emissions. Eneraque’s biogas flares can be tailored to suit your specific ...

We design Enclosed ground flares when waste gases are requested to be flared in an enclosed stack, with reduced flame visibility, minimal heat and noise, emissions sampling, ease, and smokeless combustion, in sensitive areas. The stack is internally refractory lined, designed for low and medium flows, has high destruction efficiencies relative to an open flare and designed as natural draft or ...

INOPLEX offers a Biogas Packaged Treatment Plant designed to address the energy needs of primary producers as well as food and beverage manufacturers. The company leverages decades of practical and technological experience to develop biogas systems tailored to precise business requirements. These systems encompass various complex aspects, such as flow rates, pressure drops, and gas approvals, to ...

Our Titan Demountable Flares, also named demountable derricks, are derrick-supported flares with three, or four leg configurations and overall heights of up to 200 meters. Designed to accommodate several risers/tips on the same derrick structure. Each flare tip has its own set of pilots. The demountable system allows maintenance at grade on each flare tip while keeping the other flare systems in ...

To dispose of heavy waste gases, which have a greater tendency to smoke, in a smokeless manner, we provide three different design options, depending on customer requirements. Air Assisted Flares, which utilize forced air from blower(s) to provide assist air for combustion and promotes additional air entrain from the ambient due to the relatively high exit speed of the streams. Steam Assisted ...

The Ghost series of enclosed biogas flares is a simple and cost effective combustion solution for a variety of applications where a hidden flame is required. The superior design, high quality stainless steel construction and unmatched versatility make the Ghost Series Enclosed Flares an exceptional choice for emissions control within the biogas and wastewater industries. Additionally, each ...

The Agenitor is a highly efficient power plant with optimsed gas engine and lower fuel costs. This engine is a result of intensive work by the 2G development team at 2G Drive GmbH. It's improved combustion chamber geometry has made it possible to increase the efficiency of the Agenitor range. ...

Our Peacock Oil Burners are designed to flare liquid hydrocarbons without liquid fallout or soot formation. These burners provide excellent service for well testing operations. When only oil is flared, a high-pressure air or gas source is required to provide additional mechanical atomization to ensure the mixture is a fine mist when it exits the burner nozzle which is designed to accept separate ...

Utilising waste gas in process heating or power generation (gas engine) is a preferred method of disposal, but sometimes it is impractical due to distance from a suitable site. Flaring gas is the best alternative in this situation. A temporary flare may also be required for co-generation standby systems and during landfill ...