Bioenergy Equipment & Supplies In Mali
-
PremiumManufactured by Inciner8 Limitedbased in UNITED KINGDOM
Waste to Energy has become something of a talking point when the subject of processing waste is discussed. Here at INCINER8, we have spent many years researching and developing new ways to produce energy from burning waste. This renewable energy solution is extremely popular and is constantly being enhanced. It can reduce the volume of waste to just 10% in bottom ash for most ...
-
PremiumManufactured by Continental Controls Corporation (CCC)based in USA
The AGV10 is a compact and efficient air-fuel ratio controller for industrial gas engines. It offers advanced electronic control to adjust the fuel flow and air-fuel ratio based on engine load and gas quality, resulting in better engine efficiency and reduced emissions. The AGV10 is easy to install and compatible with a variety of carburetors and mixers. It can be used with alternative fuels ...
-
PremiumManufactured by Astim A.S.based in TURKEY
Pressure vessels are closed containers designed to hold gases or liquids at a pressure substantially different from the ambient pressure. ASTIM can manufacture pressure vessels regarding to AD 2000 -Merkblatt code and also with any code customer requested and with third party control if necessary. Vessels can be manufactured as stainless or carbon steel with necessary surface ...
-
PremiumManufactured by Zeltex LLCbased in USA
Portable Fuel Analysis for Government Departments, laboratories, pipelines, research and ...
-
PremiumManufactured by Bosch Industriekessel GmbH - Industrial Boilersbased in GERMANY
The conventional fired boiler generates thermal heat or process heat while simultaneously utilising the heat potential from waste heat sources. Conventional fired heat generator with additionally integrated smoke tube pass for waste heat utilization. Environmentally friendly generation of thermal heat or process heat through the utilisation of waste heat sources. High supply reliability thanks to ...
-
PremiumManufactured by Bosch Industriekessel GmbH - Industrial Boilersbased in GERMANY
- Conventional fired heat generator with additionally integrated smoke tube pass for waste heat utilization - Environmentally friendly generation of thermal heat or process heat through the utilisation of waste heat sources - High supply reliability thanks to self-firing function - Robust, reliable and durable - Versatile design for use with different fuel types and as a multi-fuel firing unit ...
-
PremiumManufactured by Continental Controls Corporation (CCC)based in USA
The GV2 by Continental Controls Corporation is an electronic fuel control valve designed specifically for small to midsized gas engines. It offers advanced electronic fuel control to allow fuel flow ranges that include LHV/Low BTU flare gas, biogas, and landfill gas. The GV2 features a servo-coil actuator, making it fast and smooth acting with low maintenance and high MTBF. It also offers ...
-
PremiumManufactured by Bosch Industriekessel GmbH - Industrial Boilersbased in GERMANY
The UT-L is a particularly reliable and efficient heat generator with output from 650 to 25,000 kW at up to 16 bar. The design complies with the Gas Appliances Regulation. The heating boiler offers high performance and is extremely compact. ...
-
PremiumManufactured by Acme Engineering Prod. Ltd.based in CANADA
The model CEJS High Voltage Electrode Steam Boiler is the proven leader with more hours of operating experience over a wide range of applications than any competitor. The CEJS electrodes are vertically mounted around the inside of the pressure vessel which enables the CEJS to produce maximum amounts of steam in a minimum amount of floor ...
-
PremiumManufactured by Bosch Industriekessel GmbH - Industrial Boilersbased in GERMANY
The heating boiler UT-L offers high performance and is extremely compact. The design complies with the Gas Appliances Regulation. - Very high efficiency up to 105% for optimised energy costs - Compact design for easy positioning and effective use of heat - Flexible application and low return flow temperature of 50 °C possible - Specific control concept and optional real-time monitoring - ...
-
PremiumManufactured by Ennox Biogas Technology GmbHbased in AUSTRIA
In general the design for those flares is the same as for our standard flares. In accordance with the project-specific requirements (for example special gas composition, high gas temperatures or pollution) specific technical solutions and equipment are added. In principle all pyrolysis gas flares are individually customized, designed and calculated. All syngas flares have an own supporting burner ...
-
PremiumManufactured by SRS Crisafulli, Inc.based in USA
Crisafulli skid mounted and trailer mounted power units, powered by electric motors or diesel engines, that have PTO take offs or hydraulic systems. To provide hydraulic power to Crisafulli Hydraulic Pumps, Crisafulli builds Crisafulli Standard Power Units in four configurations, each either skid or dual axle mounted - i.e., Crisafulli Diesel/Hydraulic Power Units, Crisafulli Gas/Hydraulic Power ...
-
PremiumManufactured by Ennox Biogas Technology GmbHbased in AUSTRIA
The gravel filter enables the coarse filtration of the biogas by passing through a gravel layer. Foreign particles, foam and condensate are removed and channelled to a drainage point. The filter can be easily accessed through a screwed cover for cleaning. Contamination can be easily removed without the need for opening the cover by rinsing with water. The gravel filter is available for various ...
-
PremiumManufactured by Ennox Biogas Technology GmbHbased in AUSTRIA
The sediment trap removes sediment particles or condensate water which may accumulate in the gas system. The contaminated and/or saturated gas is set into a spiral motion within the container by a special inlet nozzle. The heavier particles and water collect on the side walls of the unit, where they then accumulate at the bottom of the container. Drainage can be achieved either manually or ...
-
PremiumManufactured by Aerzener Maschinenfabrik GmbHbased in GERMANY
AERZEN screw compressor packages are characterised by a great variety of types and a lot of modification possibilities. Whether these compressors serve as part of the customer's plant concept or they are applied as complete system solution, AERZEN always adapts to individual customer requirements. Forming the basis for this is the development competence of this world market ...
-
PremiumManufactured by Ecological Laboratories, Inc.based in USA
BGEm by ELI BioScience is a unique blend of methane forming bacteria called acetolactic methanogens as wall as hydrogen oxidizing methanogens. These microbes have been Isolated and stabilized in BGEm for their effectiveness to convert acetate and methyl to methane. Hydrogen oxidizing methanogens aid in producing hydrogen ions which react with available carbon dioxide to increase methane ...
-
PremiumManufactured by Ennox Biogas Technology GmbHbased in AUSTRIA
Inspection windows are used for the monitoring of the processes inside the digester without the need for opening. ennox inspection windows can be installed laterally in the digester wall, on the roof, or built into the top face. Accessories available upon request include covers, spraying units, lamps or cameras. The windows are shatter-proof and extremely stable. The frame is manufactured from ...
-
PremiumManufactured by AMETEK Spectro Scientificbased in USA
The InfraCal 2 Ethanol Blend Analyzer for measuring percent ethanol in gasoline is the ideal solution where a quick, accurate, on-site measurement is required and a single, repetitive ethanol blend analysis is needed. The InfraCal 2 ATR-E is based on proven IR technology, and used by fuel terminals, laboratories and regulatory agencies worldwide. The compact, easy-to-use InfraCal 2 ATR-E has a ...
-
PremiumManufactured by Ennox Biogas Technology GmbHbased in AUSTRIA
The NOXmatic comprises the most up-to-date quality gas are technology ensuring the safe, efficient and environmentally friendly combustion of gases from landfill, bio and sewage gas systems. Depending on the application parameters and the required combustion characteristics, the ares are supplied as either low or medium temperature units supplied with the required additional burner technology. ...
-
PremiumManufactured by Acme Engineering Prod. Ltd.based in CANADA
A compact, reliable source of steam for space and process heating, these immersion element boilers are virtually 100% energy efficient. They are completely packaged boilers ideally suited for applications requiring from 30 to more than 10,000 pounds of steam per hour. ACME Steam Generators are based on more than half a century of accumulated experience in the electric heating field. Easy and ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you