Bioenergy Equipment & Supplies In Namibia

3,680 equipment items found
  • Premium
    based in GERMANY

    AERZEN screw compressor packages are characterised by a great variety of types and a lot of modification possibilities. Whether these compressors serve as part of the customer's plant concept or they are applied as complete system solution, AERZEN always adapts to individual customer requirements. Forming the basis for this is the development competence of this world market ...

  • Premium
    based in USA

    The EGC6 is a highly efficient electronic gas carburetor designed for industrial and power generation engines. It can operate on a wide range of gaseous fuels, including biogas and low BTU gas, and has advanced electronic fuel control capabilities to precisely regulate fuel flow. The EGC6 is easy to install and can be adapted to a variety of AFR controls and carburetors, making it a versatile ...

  • Premium
    based in AUSTRIA

    The gravel filter enables the coarse filtration of the biogas by passing through a gravel layer. Foreign particles, foam and condensate are removed and channelled to a drainage point. The filter can be easily accessed through a screwed cover for cleaning. Contamination can be easily removed without the need for opening the cover by rinsing with water. The gravel filter is available for various ...

  • Premium
    based in CANADA

    ACME Electric Steam Superheaters are available for use with steam boilers as auxiliary pieces of equipment. Our superheaters are all custom-made and built to meet the specific design requirements of each application. A superheater increases the temperature of the steam but does not increase the latent heat of evaporation. This means that heating with superheated steam is similar to heating with ...

  • Premium
    Manufactured by Inciner8 Limited
    based in UNITED KINGDOM

    Waste to Energy has become something of a talking point when the subject of processing waste is discussed. Here at INCINER8, we have spent many years researching and developing new ways to produce energy from burning waste. This renewable energy solution is extremely popular and is constantly being enhanced. It can reduce the volume of waste to just 10% in bottom ash for most ...

  • Premium
    based in USA

    BGEm by ELI BioScience is a unique blend of methane forming bacteria called acetolactic methanogens as wall as hydrogen oxidizing methanogens. These microbes have been Isolated and stabilized in BGEm for their effectiveness to convert acetate and methyl to methane. Hydrogen oxidizing methanogens aid in producing hydrogen ions which react with available carbon dioxide to increase methane ...

  • Premium
    based in CANADA

    The model CEJS High Voltage Electrode Steam Boiler is the proven leader with more hours of operating experience over a wide range of applications than any competitor. The CEJS electrodes are vertically mounted around the inside of the pressure vessel which enables the CEJS to produce maximum amounts of steam in a minimum amount of floor ...

  • Premium
    based in USA

    Sample gas enters the instrument and flows through two (2) standard scintillation counter ready vials filled with ethanolamine, which retain the CO2 component. The sample gas, now less the inorganic CO2, flows through a heated palladium sponge catalyst bed, which oxidizes the sample gas. The oxidized sample gas flows through two (2) more vials with ethanolamine that retain the remaining organic ...

  • Premium
    Manufactured by Astim A.S.
    based in TURKEY

    A biogas holder is generally a floating cover with an extended rim that is submerged into the water level adequately so as to ensure that in the maximum lift position of the floating cover the rim still remains below the top water level. The covers for gas holders are designed with a vertical guided system. The rollers are attached with the cover of gas holder around its peripheral. This ensures ...

  • Premium
    Manufactured by Metrohm AG
    based in SWITZERLAND

    The 892 Professional Rancimat is an analysis system for the simple and safe determination of the oxidation stability of natural fats and oils with the well-established Rancimat method. With eight measuring positions in two heating blocks. The built-in display shows the status of the instrument and each individual measuring position. Start buttons for every measuring position enable the ...

  • Premium
    based in USA

    The GV2 by Continental Controls Corporation is an electronic fuel control valve designed specifically for small to midsized gas engines. It offers advanced electronic fuel control to allow fuel flow ranges that include LHV/Low BTU flare gas, biogas, and landfill gas. The GV2 features a servo-coil actuator, making it fast and smooth acting with low maintenance and high MTBF. It also offers ...

  • Premium
    based in GERMANY

    - For the reliable fuel supply with gas - Preassembled for fast installation - Rigorous compliance with official requirements - Increased operating reliability - Also for biogas- and hydrogen-fuelled systems Highly efficient boiler systems with perfectly matched boiler house components ensure that low levels of energy consumption and emissions are ...

  • Premium
    based in GERMANY

    The highly efficient UT-M is a three-pass boiler designed for 750 to 19,200 kW of heating at up to 16 bar. Its various output sizes and temperature ranges up to 190 °C enable flexible operation for countless process heat and heating ...

  • Premium
    Manufactured by Zeltex LLC
    based in USA

    Decades of expertise in portable octane, cetane and bio-fuel with lab-accurate analysis. 45 State Agencies have used Zeltex portable fuel octane analyzers over the years, making the ZX-101 series the gold standard in portable fuel testing. The main way that fuel is analyzed is through a CFR engine, which takes time, costs a lot of money, and destroys the sample. Our portable fuel octane analyzers ...

  • Premium
    based in GERMANY

    AERZEN process gas compressors are installed as single or multiple stage units in chemical, petrochemical, raw material and energy producing plants and in many other production centres of the processing industry all over the world. The unit is ideally suited for dry compression of all gases in chemical and petrochemical industries. Technical Data: Suction volume flow up to: 75.000 m³/h, ...

  • Premium
    based in GERMANY

    The UT-L is a particularly reliable and efficient heat generator with output from 650 to 25,000 kW at up to 16 bar. The design complies with the Gas Appliances Regulation. The heating boiler offers high performance and is extremely compact. ...

  • Premium
    Manufactured by Samyang Corporation
    based in SOUTH KOREA

    TRILITEĀ® UPRM400U is an ion exchange resin for high-purity ultrapure water, which is produced by mixing regenerated uniform cation and anion exchange resins in equal quantities. It is possible to manage not only the purity of the produced water but also the Total Organic Carbon (TOC) and Ion leakage. ...

  • Premium
    based in USA

    Several trials have been conducted to showcase the diversity of the technologies capability to adjust to different feedstocks. An anerobic digestor operator in N. Ireland, displaying high levels, of hydrogen sulfide at 270 ppm and low methane output. The trial was conducted with daily treatment of BGE1 and BGE2 on an 600,000-gallon anaerobic digestor with a combined feedstock of grass, chicken ...

  • Premium
    based in CANADA

    ACME Steam Superheaters are available for operating pressures of up to 800 PSIG and temperatures up to 1200 deg. F. Steam flow is only limited by practical size considerations. Pressure sections are built to ASME code with National Board or CRN registration. Burners are AGA or CGA listed with UL, CSA or other gas train standards as requested or applicable. The ACME Steam Superheater is delivered ...

  • Premium
    Manufactured by Inciner8 Limited
    based in UNITED KINGDOM

    Waste to Energy has become something of a talking point when the subject of processing waste is discussed. Here at INCINER8, we have spent many years researching and developing new ways to get the optimal energy back from the destruction of waste. Inciner8 are continuing to evolve their waste processing technologies. It is clear that these have the potential to contribute to UK & Global ...

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you