Bioenergy Equipment & Supplies In Sudan
-
PremiumManufactured by Astim A.S.based in TURKEY
Pressure vessels are closed containers designed to hold gases or liquids at a pressure substantially different from the ambient pressure. ASTIM can manufacture pressure vessels regarding to AD 2000 -Merkblatt code and also with any code customer requested and with third party control if necessary. Vessels can be manufactured as stainless or carbon steel with necessary surface ...
-
PremiumManufactured by Zeltex LLCbased in USA
Portable Fuel Analysis for Government Departments, laboratories, pipelines, research and ...
-
PremiumManufactured by Bosch Industriekessel GmbH - Industrial Boilersbased in GERMANY
The conventional fired boiler generates thermal heat or process heat while simultaneously utilising the heat potential from waste heat sources. Conventional fired heat generator with additionally integrated smoke tube pass for waste heat utilization. Environmentally friendly generation of thermal heat or process heat through the utilisation of waste heat sources. High supply reliability thanks to ...
-
PremiumManufactured by Acme Engineering Prod. Ltd.based in CANADA
The model CEJS High Voltage Electrode Steam Boiler is the proven leader with more hours of operating experience over a wide range of applications than any competitor. The CEJS electrodes are vertically mounted around the inside of the pressure vessel which enables the CEJS to produce maximum amounts of steam in a minimum amount of floor ...
-
PremiumManufactured by Bosch Industriekessel GmbH - Industrial Boilersbased in GERMANY
- For the reliable fuel supply with gas - Preassembled for fast installation - Rigorous compliance with official requirements - Increased operating reliability - Also for biogas- and hydrogen-fuelled systems Highly efficient boiler systems with perfectly matched boiler house components ensure that low levels of energy consumption and emissions are ...
-
PremiumManufactured by Ennox Biogas Technology GmbHbased in AUSTRIA
In general the design for those flares is the same as for our standard flares. In accordance with the project-specific requirements (for example special gas composition, high gas temperatures or pollution) specific technical solutions and equipment are added. In principle all pyrolysis gas flares are individually customized, designed and calculated. All syngas flares have an own supporting burner ...
-
PremiumManufactured by ERG (Air Pollution Control) Ltdbased in UNITED KINGDOM
0m diameter single stage V-tex® scrubber and skid-mounted pump, heat exchanger and instrumentation. The basic scrubber, pump, pipework and frame are shown in the photo, with fan, instrumentation and controls added to client requirements for each specific ...
-
PremiumManufactured by Acme Engineering Prod. Ltd.based in CANADA
A compact, reliable source of steam for space and process heating, these immersion element boilers are virtually 100% energy efficient. They are completely packaged boilers ideally suited for applications requiring from 30 to more than 10,000 pounds of steam per hour. ACME Steam Generators are based on more than half a century of accumulated experience in the electric heating field. Easy and ...
-
PremiumManufactured by Ennox Biogas Technology GmbHbased in AUSTRIA
The gravel filter enables the coarse filtration of the biogas by passing through a gravel layer. Foreign particles, foam and condensate are removed and channelled to a drainage point. The filter can be easily accessed through a screwed cover for cleaning. Contamination can be easily removed without the need for opening the cover by rinsing with water. The gravel filter is available for various ...
-
PremiumManufactured by Ennox Biogas Technology GmbHbased in AUSTRIA
The sediment trap removes sediment particles or condensate water which may accumulate in the gas system. The contaminated and/or saturated gas is set into a spiral motion within the container by a special inlet nozzle. The heavier particles and water collect on the side walls of the unit, where they then accumulate at the bottom of the container. Drainage can be achieved either manually or ...
-
PremiumManufactured by Aerzener Maschinenfabrik GmbHbased in GERMANY
AERZEN screw compressor packages are characterised by a great variety of types and a lot of modification possibilities. Whether these compressors serve as part of the customer's plant concept or they are applied as complete system solution, AERZEN always adapts to individual customer requirements. Forming the basis for this is the development competence of this world market ...
-
PremiumManufactured by F&J Specialty Products, Inc.based in USA
Sample gas enters the instrument and flows through two (2) standard scintillation counter ready vials filled with ethanolamine, which retain the CO2 component. The sample gas, now less the inorganic CO2, flows through a heated palladium sponge catalyst bed, which oxidizes the sample gas. The oxidized sample gas flows through two (2) more vials with ethanolamine that retain the remaining organic ...
-
PremiumManufactured by Ennox Biogas Technology GmbHbased in AUSTRIA
The gas dome or gas cover is used first and foremost as the basis for various attachments for digesters, i.e., foam traps, gas extraction units, safety devices, mixers, measurement units etc., and secondly as an access point into the digester. For both applications the gas dome should be adequately dimensioned in order to meet all requirements. ennox gas domes comprise of a base unit with a ...
-
PremiumManufactured by Ennox Biogas Technology GmbHbased in AUSTRIA
Every year, millions of tons of household garbage and other refuse are deposited in landfills around the world. Biochemical decomposition processes of organic bonds in these landfills produce up to 150 – 250 m³ of landfill gases per tonne of household garbage. Due to a methane content of up to 60%, landfill gas ranks number six on the list of climate-disrupting methane producers ...
-
PremiumManufactured by Ennox Biogas Technology GmbHbased in AUSTRIA
Inspection windows are used for the monitoring of the processes inside the digester without the need for opening. ennox inspection windows can be installed laterally in the digester wall, on the roof, or built into the top face. Accessories available upon request include covers, spraying units, lamps or cameras. The windows are shatter-proof and extremely stable. The frame is manufactured from ...
-
PremiumManufactured by Inciner8 Limitedbased in UNITED KINGDOM
Waste to Energy has become something of a talking point when the subject of processing waste is discussed. Here at INCINER8, we have spent many years researching and developing new ways to produce energy from burning waste. This renewable energy solution is extremely popular and is constantly being enhanced. It can reduce the volume of waste to just 10% in bottom ash for most ...
-
PremiumManufactured by AMETEK Spectro Scientificbased in USA
The InfraCal 2 Ethanol Blend Analyzer for measuring percent ethanol in gasoline is the ideal solution where a quick, accurate, on-site measurement is required and a single, repetitive ethanol blend analysis is needed. The InfraCal 2 ATR-E is based on proven IR technology, and used by fuel terminals, laboratories and regulatory agencies worldwide. The compact, easy-to-use InfraCal 2 ATR-E has a ...
-
PremiumManufactured by Ennox Biogas Technology GmbHbased in AUSTRIA
The double membrane gasholder is made up of two spherical shaped polymer membranes (other forms are also possible), lying one inside the other. The external membrane is maintained in a stable form with the use of an air blower. The external membrane then serves as protector for the inner membrane against the influence of environmental factors such as wind or snow. The biogas is contained within ...
-
PremiumManufactured by Continental Controls Corporation (CCC)based in USA
The AGV50 is a compact and efficient air-fuel ratio controller for industrial gas engines from 5,000 bhp to 38,750 bhp. It offers advanced electronic control to adjust the fuel flow and air-fuel ratio based on engine load and gas quality, resulting in better engine efficiency and reduced emissions. The AGV50 is easy to install and compatible with a variety of carburetors and mixers. It can be ...
-
PremiumManufactured by Inciner8 Limitedbased in UNITED KINGDOM
Contacting INCINER8 is the first step in the process of solving any waste problem. No matter what our clients waste stream is be it large or small amounts of waste, our Research and development team, with over 30 years of combustion and product engineering experience, will have a solution to any challenge. We work together with our clients through the designing, manufacturing and technology ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you