Bioenergy Equipment Supplied In Brazil

The Biogas compressor series C is an oilfree screw compressor in 3 sizes for volume flows up to 1900 m³/h and 3,5 bar overpressure. It is suitable for boosting the intake pressure of treatment plants for biogas (BGTP) or as an essential part of biogas injection plants ...

The SgPur system is specifically designed to treat sour gas from oil and gas operations. The system reduces hydrogen sulfide (H2S) concentrations and converts it to solid elemental sulfur for resale. The system uses a liquid chemical catalyst, compact gas/liquid contactor, and solids removal system and does not consume the chemical catalyst driving the conversion of H2S to sulfur, minimizing ...

AERZEN screw compressor packages are characterised by a great variety of types and a lot of modification possibilities. Whether these compressors serve as part of the customer's plant concept or they are applied as complete system solution, AERZEN always adapts to individual customer requirements. Forming the basis for this is the development competence of this world market ...

The use of biogas as an energy source will considerably help achieve the environmental objectives set nationally and internationally; be that reducing reliance on nuclear energy or the reduction of CO2 emissions. Specially designed for the biogas market, AERZEN biogas blowers of series GM ensure ultimate reliability and ...

The 893 Professional Biodiesel Rancimat is an analysis system for easy and safe determination of the oxidation stability of biodiesel (fatty acid methyl ester, FAME) and biodiesel blends in accordance with EN 14112, EN 15751 and EN 16568 standards. With eight measuring positions in two heating blocks. The built-in display shows the status of the instrument and each individual measuring position. ...

The biogas compressor series VMY is an oil-injected screw compressor in 3 sizes for volume flows. It is suitable for boosting the intake pressure of treatment plants for biogas (BGTP) or as an essential part of biogas injection plants (BGIP) for the compression of biomethane to inject into gas grids. ...

AERZEN process gas compressors are installed as single or multiple stage units in chemical, petrochemical, raw material and energy producing plants and in many other production centres of the processing industry all over the world. The unit is ideally suited for dry compression of all gases in chemical and petrochemical industries. Technical Data: Suction volume flow up to: 75.000 m³/h, ...

The 892 Professional Rancimat is an analysis system for the simple and safe determination of the oxidation stability of natural fats and oils with the well-established Rancimat method. With eight measuring positions in two heating blocks. The built-in display shows the status of the instrument and each individual measuring position. Start buttons for every measuring position enable the ...

The model CEJS High Voltage Electrode Steam Boiler is the proven leader with more hours of operating experience over a wide range of applications than any competitor. The CEJS electrodes are vertically mounted around the inside of the pressure vessel which enables the CEJS to produce maximum amounts of steam in a minimum amount of floor ...

A compact, reliable source of steam for space and process heating, these immersion element boilers are virtually 100% energy efficient. They are completely packaged boilers ideally suited for applications requiring from 30 to more than 10,000 pounds of steam per hour. ACME Steam Generators are based on more than half a century of accumulated experience in the electric heating field. Easy and ...

AGCO Power CORE is an exceptional diesel engine family with its excellent fuel economy, reliable low-speed concept and a streamlined design that enables higher quality with fewer parts. Rigorously tested and crafted, AGCO Power CORE family is a reliable source of low-emission power for all off-road applications in the 100–250 kW range. But it is also a flexible platform designed with ...

With the introduction of new 3 MW Series, Suzlon has yet again redefined the benchmark with S144, one of the largest wind turbine that will target India's relevant low wind regimes. 144m rotor diameter with a swept area of more than 16,618 sq. meters. 6 pole generator, proven DFIG technology, Water - Air cooling. Work platforms, covered entry from tower top, safety guards on all ...

Suzlon introduced the 2.6 to 3.0 MW platform to unlock unviable sites and deliver improved energy yield suitable for all wind regimes. 133m rotor diameter with a swept area of more than 13,070 sq. meters. New 6 pole generator. Smart pitching and innovative control features. Large single-piece rotor blade measuring 65 meter ...

The demand for SPE cartridges with improved flow characteristics and reduced susceptibility to the formation of fines has led to the development of a family of SPE tubes packed entirely with spherical, non-friable particles. The Supel Sphere Carbon/NH2 dual layer SPE tube contains both spherical carbon particles and spherical aminopropyl (NH2) modified silica . It was developed to offer superior ...

Elkem has developed its own production technology for prebaked electrodes. Special raw materials are chosen and electrically calcined, to achieve the best properties. Forming and baking of electrodes involves a process with a much shorter lead time compared to traditional prebaked production. This process also makes it possible to make single electrodes with individual properties, if a customer ...

One of the most efficient systems for the biological removal of sulphides from biogas is the BIDOX (BIological Desulphurization by OXidation). No chemicals are needed to operate the BIDOX system. The installation requires limited maintenance, is equipped with little process control and manages to reduce the amount of H2S in biogas to levels below 50 ppm. These features have a significant positive ...

The Atlas V Solid Rocket Motor designated AJ-60A was developed from 1999 to 2003 as a commercial low cost strap-on booster for the Atlas V launch vehicle. The motor is configured with a thrust profile that reduces aerodynamic loads during max-Q and thrust-differential during tail-off. It can be configured for other applications that require a different case length and/or attach interface ...

Class:DIN PN100/ 160.Full Bore:DN15 (½”) to DN150 (6”).Construction Standard .ASME B16.34 / ISO 17292 / API 6D / ISO 14313 / MSS SP-25 / ISO ...

The Thermo-Z plate style heat exchanger is designed to recover heat from energy consuming processes up to 1500°F. Energy can be recovered and returned as process make-up air, used to preheat combustion air, or used for plant or office heating. Thermo-Z offers fully adjustable plate thickness and spacing as well as multiple flow patterns. The heat exchanger is designed for industrial ...

W,W,F separators, O.D. × L 8 mm × 110 mm, pkg of 50 ...