Bioenergy Equipment Supplied In Alberta

ACME Electric Steam Superheaters are available for use with steam boilers as auxiliary pieces of equipment. Our superheaters are all custom-made and built to meet the specific design requirements of each application. A superheater increases the temperature of the steam but does not increase the latent heat of evaporation. This means that heating with superheated steam is similar to heating with ...

Husky fuels are marketed through retail outlets, travel centres and bulk distributors from Vancouver Island to Ontario. Husky retail stations sell regular unleaded gasoline and 'Mother Nature's Fuel' – ethanol blended gasoline. Ethanol blends are available at most Husky retail outlets. All grades of Husky gasoline and ethanol-blended gasoline contain a deposit-control additive package ...

We’re working with Radicle to offset all of the embedded carbon emissions from the mining, manufacturing, transportation and construction of solar PV Systems for our ...

The Milner 2 (“M2”) power plant is currently a 300 MW state-of-the-art Combined Cycle Gas Turbine (“CCGT”) unit located at the HR Milner Generating Station near Grande Cache, Alberta. The M2 CCGT unit benefits from significant existing infrastructure at the brownfield site, including the existing M1 steam turbine generator and the associated balance of plant, capturing ...

The CFB Gasifier is a Circulating Fluidized Bed (CFB) reactor developed by Metso. It is a robust and proven process for utilising wide range of fuels from peat and biofuels to different waste fractions. It can be applied to substitute oil, natural gas or other fossil fuels in industrial furnaces like limekilns, or to substitute coal, peat or other fossil fuels in power boilers. Size range for our ...

The SRH2 series of heat-exchanger unit heaters is designed for steam applications on drilling rigs where boiler neglect can lead to freeze-up conditions. During an accidental freeze-up the SafeDeform™ core headers are designed to accommodate ice expansion. The SRH2 Series is designed for pressures up to 150 psig (1034 kPa) in single-pass configurations only. Added benefits include our ...

The HUH series of heat-exchanger unit heaters is designed for rugged industrial applications in steam, hot water, glycol or other fluid circulating heating systems. The HUH series is designed for pressures and temperatures up to 400 psi and 550 °F respectively in single-pass and multi-pass core configurations with multi-pass units greatly improving performance characteristics when used with ...

At Exchanger Industries Limited, we have designed and fabricated air-cooled heat exchangers – otherwise known as aerial coolers – in forced draft, induced draft and natural convection varieties for clients worldwide. With a full team of highly experienced thermal and mechanical design experts on staff, our engineering department can take on your most complex heat exchanger design ...

Coconut shell charcoal briquettes. Charcoal briquettes are mainly used as fuel for barbecuing although it can be used for any similar heat generation process. Coco Charcoal Barbecue Briquettes: Barbeue Briquettes are made from the coconut shell, which is carbonized and then compressed, to briquettes. Thus it is environmentally friendly being derived from a renewable resource and being 100% ...

The incinerator’s capacity is dependent on waste composition: Incineration Capacity: The higher the heating value of the waste, the lower is the capacity in terms of kg/h that can be incinerated. This can be explained by noting that waste that has a higher heating value requires more air per unit of mass to incinerate than does waste with a lower heating value. Load Capacity: The size of ...

Clean Tech Inverter (CTI): Acceleware's field-proven, proprietary industrial heating technology 'engine' that can enable the decarbonization of multiple industrial heating processes via highly efficient delivery of radio frequency (RF) energy. Acceleware has a working commercial-scale (2 MW) version of the CTI. ...

Ethanol is produced from wheat and/or corn and added to gasoline as a renewable, clean-burning fuel that contains oxygen. Adding oxygen to fuel results in more complete fuel combustion, which can reduce tailpipe ...

The IWR MS-90 vessel is a cost effective solution for low flow GAC treatment applications. This vessel is constructed of epoxy coated mild steel and is capable of operating at pressures below 10 psi. and flow rates below 10 ...

Once commissioned, the Lacombe Biorefinery will be producing biogas to provide enough fuel for a 1.4MW power generation unit. This renewable energy source, comprising mostly methane (natural gas), will be produced using large anaerobic digester vessels. The biogas is produced by micro-organisms breaking down organic matter in an oxygen-free environment. Biogas can be produced from materials ...

BIOCH4NGE is the AB solution for upgrading biogas-to-biomethane through a membrane system: flexibility, scalability and low energy consumption for a real competitive ...

Get a grip on LED performance. Pelican's 2350 LED Flashlight emits up to 178 lumens of concentrated light. Powered by one AA alkaline battery, it's one of the brightest flashlights in its class. At only 4.23", you'll always want the Pelican™ 2350 LED Flashlight in your pocket. Its small size does not reflect it performance or features. The 2350 provides three modes, High / Strobe / Low. ...

The Tornado Electric Ignition System (TEIS) is a cost-effective alternative to the pilot monitoring system that can be used for sweet gas applications where fuel gas or propane supply is not ...

Tornado's High Pressure or Low Pressure gas-assisted flare stack designs can eliminate smoke (HP Gas-Assist) or sour gas odours (LP Gas-Assist) on site. These designs can also be used to ensure efficient combustion in the most challenging of weather ...

Inproheat Industries offers Compact Welded heat exchangers from Tranter and Nexson. These heat exchangers are defined by an assembly of plates that are usually washboard-patterned-embossed or herringbone with almost all of the design material being involved in the heat transfer process. Every other plate is turned 180°, which causes the ridges of the adjacent plates to intersect with one ...

FREEDOM WON systems are off-grid and use thermostatic controls, meaning no electronic controller required. Choose high performing evacuated tube collectors or premium flat plate ...