Bioenergy Equipment Supplied In New Zealand

The SgPur system is specifically designed to treat sour gas from oil and gas operations. The system reduces hydrogen sulfide (H2S) concentrations and converts it to solid elemental sulfur for resale. The system uses a liquid chemical catalyst, compact gas/liquid contactor, and solids removal system and does not consume the chemical catalyst driving the conversion of H2S to sulfur, minimizing ...

Waste to Energy has become something of a talking point when the subject of processing waste is discussed. Here at INCINER8, we have spent many years researching and developing new ways to get the optimal energy back from the destruction of waste. Inciner8 are continuing to evolve their waste processing technologies. It is clear that these have the potential to contribute to UK & Global ...

The Thinair 102 wind turbine is pioneering development of Powerhouse Wind, and is designed to be a component of an off-grid renewable energy system or micro-grid. Its generation profile is compatible with that of solar panels as it is will continue to generate power at night and during the shorter cloudy winter ...

Combined heat and power (CHP), or cogeneration, offers a range of potential benefits for residential applications. Cogeneration systems are successfully applied in a wide range of residential applications. Gas engine cogeneration systems can provide significant financial savings on fuel costs used to provide electricity and heat. In some countries the government provides tax benefits to the owner ...

Agricultural biogas plants utilise organic materials found on farms to generate biogas, a renewable fuel source and in turn renewable power through cogeneration / combined heat & power. The plant may be designed to accept energy crops that have been grown specifically to input into the digestion facility or agricultural wastes. These crops are typically ensilaged and stored in clamps or ...

The spent byproducts of distilleries have historically been treated as waste. However, the liquid and solid wastes of the distillation industry have greater potential and can be sent to anaerobic digesters and converted into biogas. This biogas in turn can be turned into renewable electricity at high efficiency via GE Jenbacher gas ...

Crossle Coils Steam Coils provide a robust heat exchanger that is compact yet supplies superb thermal performance. Coils are available for Low Pressure Flash Steam applications or High Pressure Space Heating or Process Heating Applications. Steam Coils can be designed to specification, manufactured to customer drawings, or manufactured to Customer sample. Coils are available in frames pitched ...

If you have a 4.5kW generator (or greater), then the AC electric model is your first option to consider. Our high volume, high pressure pumps produce large quantities of superior quality water in a short period of ...

When waste is stored in landfill sites, micro-organisms break down the waste material causing gas to be released. This gas can be extracted from disposal site and made available for use as fuel. Eneraque manufactures, installs and maintains landfill gas flares purpose built for your waste ...

The ROTORCOMP compact screw unit is an oil injected screw compressor with positive displacement, for installation within packaged air compressors. The NK units are suitable for electric drive but are also available in diesel or hydraulic ...

Coal mine methane (CMM) is a type of gas present in active, working mine sites. This gas is extracted from the air in the coal mine helping improve safety and preventing uncontrolled release of methane to ...

The Jenbacher Type-2 gas engine was introduced in 1974 and is the engine with the longest development history of the range. The 208 has 8 inline cylinders and is available at electrical output from 249kWe or 335kWe. The J208 is renowned for its robust design and highest levels of component durability. It is particularly well suited to troublesome gases such as landfill ...

To maintain the temperature within an anaerobic digester to within the mesophilic range of 35 – 38 Deg C, a sludge heating exchange system is used. A portion of the sludge is re-circulated continuously through a tube in tube type sludge heat exchanger using a sludge recirculation ...

Using a combined heat and power (CHP) or cogeneration plant in a hospital is an ideal way of achieving improved energy efficiency and reduced carbon emissions. Its utilisation helps a hospital’s limited financial resources go further. Natural gas is a clean-burning low carbon emission fuel. A CHP plant facilitates the high efficiency use of this fuel, by recovering not only electricity but ...

Carbon Capture, Utilisation & Storage (CCUS) is the process of capturing CO2 from energy intensive processes before it enters atmosphere and finding a market use or transport to a storage facility (normally underground in geological caverns). Long-term storage of CO2 in a geological formation is still relatively new as a concept but will play a huge part in the net-zero efforts in the future. ...

A fuel gas dehumidifier or gas drier is an ancillary system to a gas engine that is used to remove moisture from the fuel gas for the cogeneration system (dessication). The removal of water from the fuel gas helps to optimise the combustion process in the engine, prevents condensation and helps protect the engine from the ...

FlareWell® waste gas burners form part the anaerobic digestion process. FlareWell is designed to burn gas from the digestion process in excess of the gas necessary for the sludge heating system. The burner is automatic in operation and uses digester gas and/or LPG for pilot ...

Through on-going investment in research and development GE's gas engines remain market leaders in the gas engine field. The engines are highly efficient at the conversion of the energy within gas into useful electrical power. In the event that there is a local use for heat, the alternative combined heat and power configuration may be a more useful engine ...

Abandoned mine methane (AMM) can be recovered from disused coal mines. Abandoned mine methane (AMM) projects produce energy (thermal and electrical) with the added bonus of reducing atmospheric emissions of methane. Methane is a potent greenhouse gas and huge amounts of methane will escape from the mine for years to come following closure. Sealed abandoned mines offer an excellent opportunity for ...

Syngas, also known as synthesis gas, synthetic gas or producer gas, can be produced from a variety of different materials that contain carbon. These can include biomass (wood gas), plastics, coal, municipal waste or similar materials. Historically town gas was used to provide a gas supply to many residences in Europe and other industrialised countries in the 20th Century. Gas engines utilising ...