Bioenergy Equipment Supplied In Oregon

Concentric Tube Heat Exchangers are often used to maintain heat in the anaerobic digesters. Sludge from the digester is circulated through the inside tubes of the heat exchanger while hot water is passed through the surrounding outer tube as illustrated below. Heat exchangers are also designed to warm incoming sludge before it is transferred into the digester. Another application may be for ...

PacWest Global is proud to be partnered with Two principals with combined industrial boiler experience in excess of 80 years. Experience in industrial boiler design on Coal, oil, gas and biomass fired boilers Experience in engineering, proposal design, project management, construction, start up and performance testing of industrial boilers. Engineering, Design, Project Management and Consulting ...

ZeaChem’s core technology focuses around the conversion of cellulosic sugars into 2 and 3 carbon organic acids and acetates such as acetic acid and propionic acid. These acids are intermediate building blocks for an extensive range of downstream products including Vinyl Acetate Monomer, Ethylene Vinyl Acetate, Ethylene, Propylene, Acrylics etc. ...

EnerTek burner technology can be incorporated with process steam, hot water, or thermal fluid applications. High heat release and flux rates allow successful integration with small combustion chamber volumes as typically found in package boiler hardware. An extremely cost competitive option for biomass firing in larger institutional or industrial ...

One of the major product lines DMT Environmental Technology offers enables biogas to be upgraded to pure methane. This can subsequently be supplied for commercial use in the national gas grid. It can also be processed into Compressed Natural Gas (bio-CNG), which is used as car fuel or as heating fuel. The biogas generated from green waste and chicken manure from local farms around Poundbury is ...

Gas Desulphurisation of biogas and syngas is necessary to prevent corrosion and SOx emissions. Biogas is produced by fermenting biological waste and is considered one of the most important sources of renewable energy. It is a substitute for natural gas. Both biogas and syngas can contain hydrogen sulphide (H₂S), so desulphurisation is essential. Since the Sulfurex directly controls the ...

This cyclonic style biomass burner is an economical alternative to fossil fuel combustion. A fully engineered, but simple, design promotes positive combustion conditions with a rotating combustion air stream. Fully modulating output rates make this combustor suitable for smaller drying applications when relatively clean biomass fuel is available. ...

The InPipe HydroXS energy recovery system replicates the functionality of a control valve, creating precise pressure management and flow control. Instead of burning off the differential pressure, it creates renewable energy. This efficiency reduces operating costs, saves water, reduces carbon emissions, and extends the life of your infrastructure. The smart-control technology allows for real-time ...

This proven reciprocating grate combustor is ideal for use with difficult to burn biomass fuels. Fully capable of using fuels with moisture contents as high as 55% this combustor features high chrome grate bars, conservative heat release rates, generous furnace volumes, and automatic de-ashing. Ideal for hot gas generation with wet biomass fuel on rotary dryer applications. ...

Urban Solar’s Ready-Made Solar (RMS) Series offers sleek architectural design and year-round reliability for outdoor lighting applications. The compact all-in-one design is ideal for park, pathway, greenway and trail settings. Installation is fast and easy, and no specialized electrical knowledge or extensive site work is required. RMS systems position your community or business as an ...

Because coal plants are already connected to the power grid, by replacing coal with clean-burning, carbon neutral biocoal, their useful lives are extended. Other green energy technologies such as wind, solar, and traditional biomass (white pellet) power come with their own economic and environmental ...

Carbon neutral HM3BiocoalTM works as drop-in coal replacement fuel to extend the lives of existing powder coal plants. It also provides a more environmentally friendly and superior alternative to the white pellets for the export market for use in both coal-fired and biomass-fired power ...

GK Machine is your local supplier of affordable, reliable, turn-key above ground steel fuel storage tanks. Whether you need bulk fuel storage for diesel, gasoline, bio-diesel, ethanol, or oil, we have a durable, easy to install and cost-effective method to meet your storage needs. Our double wall systems are used within the agricultural, automotive, marine, construction, sanitation and trucking ...

Optimize your power generation without grid failures or pollution through innovative, efficient and flexible SOFC ...

The 114SD natural gas trucks feature factory-installed and warranty-covered natural gas engines, fuel tanks and related components, including a standard methane detection system. Frcightlincr's factory installed CNG tanks are Type IV fiberglass/carbon with a ful wrap plastic Bner and an expected life span of 20 years. CNG tanks featured on Freightliner products meet or exceed al applicable safety ...

Standard system for removal of H₂S out of biogas. DMT has developed the DMT Sulfurex gas desulphurisation scrubber. The DMT-Sulfurex desulphurisation process has proven to be cost effective for smaller applications (see references) due to its low capital and running costs, whereas traditional gas desulphurisation systems are not designed for smaller applications and can only be cost ...

Zero Waste Energy offers a high-solids, batch processing anaerobic digestion design for facilities starting as low as 5,000 TPY and up to 90,000 TPY of almost any organic material utilizing SMARTFERM proprietary technology. The batch processing is well suited for the production of biogas from stacked solid organic waste in a non-continuous process. Unlike other dry fermentation technologies, ...

The most robust and efficient technology for pure hydrogen generation at ...

The hydrolysis unit, an Andritz based system, can process up to 10 tons per day of chipped cellulosic biomass* into separate C5 and C6 sugar streams. The hydrolysis unit can operate using steam explosion, dilute acid/base or auto hydrolysis, in single stage or dual stage configuration. With minor upgrades, the hydrolysis unit can incorporate other pretreatment chemicals and configurations. ...

The Wattmiser is an adjustable speed drive system that varies the speed of a wound rotor induction motor steplessly and efficiently. The Wattmiser system has three major parts: a wound rotor motor, a motor starter, and a slip recovery section, which is the Wattmiser control. A wound rotor induction motor is similar to a squirrel cage induction motor except that in place of the bare rotor bars ...