Burner Design Downloads

Thermal flaring technologies used for the destruction of Hydrocarbons, Volatile Organic Compounds (VOCs) or Hazardous Air Pollutants (HAPs) are designed in two basic configurations; open and enclosed flame burners. Recent regulations on visible emissions, vapor radiation, Greenhouse Gases (GHGs) and noise pollution have driven industry away from open flaring and towards the enclosed vapor ...

By Anguil Environmental Systems, Inc.

The Beckett ADC Oil Burner is designed for applications where an AC power source is not an option. ...

By Beckett

Hot air heaters consist of a rectangular box containing the burner assembly designed to work with LPG (on request can be supplied for working with natural gas). They are complete with electric fan for sucking the air to be heated and put the heated air in the environment . They are equipped with and electronic device for the control and operation. They are available with galvanized steel or ...

By Cizo S.r.l.

FAV Systems. has developed the FAV-WG-TDU. This unit is a vertically fired, no visible flame, ceramic lined combustion chamber with a multi-tipped burner arrangement. This unique burner design and configuration produces an efficient and very quiet burning combustion flame. We can achieve these features by utilizing a ceramic coated burner, velocity breaker and combustion zone stabilizer combined ...

By Flare and Vapor Systems Corp

The AC range of flare stacks is designed to offer a degree of control over the combustion process in an elevated flame burner. The burner tip design is based upon the principle of pre-aerated combustion giving the option of a short sharp, non-luminous flame, as opposed to the yellow-tipped long lazy flame typical of diffusion ...

By Organics Group plc

Simply put, the low emissions RatioMatic burner is the world's most reliable air-heating burner. With a design that takes the guesswork out of start-up and adjustment, the RatioMatic burner is both safe and easy to use. The burner features a ratio regulator that automatically compensates for changes in operating conditions without requiring an additional gas adjustment, a direct-drive air ...

By Eclipse, Inc.

Clean Combustion Load Burner systems have been designed for energy intense industrial applications. Through active innovation and modular design we ensure each system provides improved efficiency and reliability. High Turn Down fuel injectors are integrated in Load Burner stations. Turn Down Ratio of 20:1 is achivable when using the complete BMS and control. Thats give the possibility to run on ...

By Clean Combustion Technologies AB

Eclipse low emissions TFB burners are designed to fire radiant and immersion tubes with inputs from 300,000 to 2,000,000 Btu/hr. With a vigorous spinning action, the unique nozzle design creates an intense adjustable length flame. This long, spiraling flame results in cleaner combustion, efficient heat transfer and more precise, uniform tube temperatures. In addition, the flame scrubs the inside ...

By Eclipse, Inc.

EOLO VIP is our new condensing and modulating suspended hot air generator that ensures maximum rationality in temperatures and consumption. Manual or automatic modulation of the thermal output of the burner allows regulation of the generator power in accordance with necessary heating requirements. Also available in the EOLO BLULINE version, a standard suspended hot air generator. The generator ...

By Systema S.p.A.

Winnox Burners are Designed to Comply with Global Emissions Mandates. Easy to set up and operate, low NOx Winnox burners are ideal for air heating and oven applications. Featuring a modular design, a variety of options and configurations are available. Each burner incorporates direct-spark ignition and an air/gas regulator resulting in efficient firing over a wide gas turn down range, all done at ...

By Eclipse, Inc.

The Shand & Jurs Biogas 97300 Waste Gas Burner is designed to combust biogases generated in fermentation processes. It efficiently incinerates low BTU gases from anaerobic digesters, lagoons, and municipal landfills, minimizing odors and VOC's. The stoichiometric pilot ensures that a proper air to fuel mixture is maintained throughout the wide range of pressure and BTU fluctuations. A ...

By Shand & Jurs (L&J Technologies & L&J Engineering)

Installed with a fired heater, a cracker furnace or a reformer, process burners are a critical element in the refining and petrochemical processes. Whatever the application, the technical requirements or project specifications, Fives designs and supplies a complete range of ITAS process burners, from engineering design to site assistance and supervision, revamping and training: ...

By Fives I.T.A.S. s.p.a.

Blast Tips are small burners designed to handle combustible mixtures of gas and air under sufficient pressure to cause a blast-like flame. In general, Blast Tips are built to burn without the use of any refractory tunnel and are either self-piloting or built to prevent the flame from blowing away under normal conditions of operation. Blast Tips are suitable for a variety of applications. They can ...

By Eclipse, Inc.

Easy to maintain and compatible with modern requirements. Bentone gas burners are designed and approved in accordance with the European standard EN 676. Our BFG 1 burners saves energy and are compatible with the environmental requirements and is also very reliable. ...

By Bentone

The Callidus Ultra-Blue (CUBL) is rapidly becoming the preferred Ultra-low NOx process burner. An innovative design has been employed which increases the burner’s stability and allows for optimal performance on typical refinery fuel gases and 100% natural gas. The new design also increases the tile exit velocity which enhances fuel/flue gas/air mixing, providing a shorter, ...

By Callidus Technologies - part of UOP, a Honeywell Company

BWE can deliver complete systems for multiple fuel types. The overall systems will typically consist of silos and feeders and of cause mills, PF-piping and burners. Design and choice of feeders and mills will be based on fuel characteristics and BWE specifications and will typically be selected from the top end suppliers within this field. BWE will design according to clients´ ...

By Burmeister & Wain Energy A/S (BWE)

Pelltech Domestic range burners are designed to heat small and medium-sized residential and public buildings. Replacing an old oil or gas burner with a more sustainable Pelltech pellet burner is effortless and quick, thanks to their compatibility with most of the existing heating systems. PV20 and PV30 are easy to use due to their unique electrical ignition, automatic power level selection and ...

By Pelltech OÜ

Pelltech Domestic range burners are designed to heat small and medium-sized residential and public buildings. Replacing an old oil or gas burner with a more sustainable Pelltech pellet burner is effortless and quick, thanks to their compatibility with most of the existing heating systems. PV20 and PV30 are easy to use due to their unique electrical ignition, automatic power level selection and ...

By Pelltech OÜ

Riello RC2-R is synonymous with highly compact size. The new burners in the light oil series are one stage with an output ranging from 17 to 46 kW. These burners have been specifically designed to meet the increasing trends towards direct connection to outside air for combustion and high pressure working field demand ...

By Suntec Energy Systems

These two burner types are designed and installed to try to maintain a uniform heat flux profile to the process tubes.Ethylene Cracking Plantwww.ClearSign.comContact UsPhone: (206) 673-4848Fax: (206) 299-3553Email: info@clearsigncombustion.com12870 Interurban Avenue South Seattle, WA 98168 ©2013 ClearSign Combustion Corporation. ...

By ClearSign Combustion Corporation