Boiler Safety Equipment Supplied In USA

Saskatoon Boiler coal fired boilers are designed for steam or hot water service in sizes from 200,000 to 30,000,000 BTU/HR output. All boilers are in compliance with the applicable requirements of the Standard for Solid Fuel Central Heating Appliances, CAN/CSA-B366.1 and are listed and labelled by Underwriters’ Laboratory of Canada. Each unit consists of a boiler, stoker, safety controls ...

The Elite Ultra High Efficiency Boiler was co-designed by our Italian engineers with two things in mind: Quality and dependability. This 100% quality and safety tested boiler is packed with ultimate technologies and smart connectivity for thermal home comfort and energy efficiency’s you can depend on. With no crucial detail left unnoticed, the Elite Ultra will perform at its best when you ...

The Arrowhead 3-pass firebox design with wetback boiler is designed for maximum efficiency, reliability and durability in today’s most demanding environments. Available with NOx reduction technology to 9 ppm. With pressures of 15 psi steam and 30 psi hot water, the Arrowhead is the intelligent option for your particular needs. Available in sizes ranging from 10 to 100 ...

The Apache 2-pass dryback boiler is designed for maximum efficiency, reliability and durability in today’s most demanding environments. Available with NOx reduction technology to sub 9 ppm. With pressures of 15 to 300 psi steam and 30 to 160 psi hot water, the Apache is the intelligent option for your particular needs. Available in sizes ranging from 40 to 2,500 ...

Stoichiometric Combustion Control creates a condition in the boiler where there is just enough oxygen (O2) available to oxidize each hydrogen and carbon atom from the fuel. To achieve this condition, you starve the combustion air until some carbon atoms cannot continuously get enough O2 in the furnace section of the boiler and CO is formed instead of CO2. This is also the basis of low excess air ...

This is your basic CSD-1 safety setup in a mechanical room to isolate gas or power to the boilers in an emergency. AGS only supply the highest quality emergency buttons for increased longevity and reliability. AGS gas solenoid valves can be used to shutdown gas lines or the emergency button can be wired in conjunction with the boiler safety limit circuit to shutdown boilers when pressed. For more ...

FireWIN is a state of the art wood pellet boiler combined with the features of a room heating stove. This makes the FireWIN the ideal feature appliance for any low carbon building. Its stylish finish along with a host of innovative Windhager features ensures that the FireWIN doesn’t look out of place in any property whilst providing high efficiency heat. FireWIN is available as a hand fed ...

The unique ClydeUnion Pumps TWL™ pump is a single wheel steam turbine, two-stage pump, where both the turbine and impellers are mounted on a rigid shaft, supported by a central bearing assembly integral within a monobloc turbine/pump ...

Our Unilux boilers are the first and only 5-pass, bent-tube boilers that operate at 85% efficiency, standard. The tangent tube design allows for unsurpassed convective internal pumping and maximum heat transfer. Standard design pressure is 160 PSI / ASME Section IV, with higher pressures ...

Advanced Climate Technologies manufactures high-efficiency wood pellet and wood chip boilers for commercial, institutional multi-family residential buildings. The boiler systems range in size from 0.5 to 1.7 Million Btus for buildings sized 5,000-100,000 ft². ACT Bioenergy Boilers have been specifically designed to optimize customer convenience and ease-of-use to compliment or completely ...

Discover the versatility and efficiency of Nyle's Heat Treating System, designed to handle a wide range of wood products, from pallets to firewood. Our innovative and flexible design allows for easy modifications and expansions to adapt to changing regulations or your evolving needs. ...

Superheated steam is mainly used in applications where the steam pressure can be harnessed. The lower density of superheated steam allows for higher efficiency in propulsion applications –like a turbine or reciprocating piston. Additionally, the higher ΔT tolerance of superheat steam makes it advantageous in applications where condensing steam (water droplets) would damage equipment ...