Combustion Control Equipment & Supplies In Asia & Middle East

Low nitrogen oxide combustion technology is to improve the combustion equipment or control the combustion conditions, using a variety of combustion means in the furnace to control the production of NOx in the combustion process, in order to reduce the NOx in the tail gas of the combustion ...

The model CEJS High Voltage Electrode Steam Boiler is the proven leader with more hours of operating experience over a wide range of applications than any competitor. The CEJS electrodes are vertically mounted around the inside of the pressure vessel which enables the CEJS to produce maximum amounts of steam in a minimum amount of floor ...

The NOXmatic comprises the most up-to-date quality gas are technology ensuring the safe, efficient and environmentally friendly combustion of gases from landfill, bio and sewage gas systems. Depending on the application parameters and the required combustion characteristics, the ares are supplied as either low or medium temperature units supplied with the required additional burner technology. ...

The C Series is fully packaged and designed to provide maximum energy efficiency at minimum cost. This is a great economical selection for a retrofit or upgrade of an existing boiler room. ...

Two systems perfectly combined – The new dual fuel boiler SP Dual. The SP Dual firewood and pellet boiler combines two well designed systems. It fulfills all the requirements for firewood and pellet fuels in two separate combustion chambers. Highly efficient and convenient, the SP Dual guarantees low wmissions an energy costs. ...

The perfect solution to meet thermal energy needs at low cost and to contribute to the large-scale diffusion of small-medium heating plants primarily functioning on wood chips. The B•Compact system is pre-assembled and tested in the Grantorto (PD) and San Pietro in Gu (PD) production factories. Thanks to its highly portable configuration, it has become a benchmark in terms of installation ...

The BGR Cube is a highly versatile, low cost vapour combustor designed to destruct volatile organic compounds (VOCs) and BTEXs produced from casing gas, pneumatic devices, or storage tanks. The BGR Cube eliminates the need to install expensive vapour recovery units (VRU) or uneconomical incinerators that provides an economical alternative to venting or ...

NAO inline flame arrestors come in many sizes and configurations. They are used for VOC or vapor control of combustible streams, i.e., paint booth or paint line vapor control, hydrogen lines in nuclear submarines, fuel tanks, thermal oxidizers. NAO inline arrestors come in sizes from 1/8" connections to a complete wall in an auto plant paint line (17 - 34" grids). They are available in both ...

Janfire System Jet ranges from 60kW to 1000kW. System Jet Wood Pellet boiler is unique by design, a leader in its class, well proven in Scandinavia and been manufactured for the past 30 ...

Safety, reliability and flexibility are vital to effective burner management systems. Tulsa Combustion designs and assembles control panels and skids in our own shop, using components as specified by our customers or with wide industry acceptance. We provide self-contained systems or sub-systems to be integrated into a plant’s DCS, for both new installations and retrofits required in ...

NAO inline flame arrestors come in many sizes and configurations. They are used for VOC or vapor control of combustible streams, i.e., paint booth or paint line vapor control, hydrogen lines in nuclear submarines, fuel tanks, thermal oxidizers. NAO inline arrestors come in sizes from 1/8' connections to a complete wall in an auto plant paint line (17 - 34' grids). They are available in both ...

The Vapor Power Superheater is a coil tube design, similar to our steam generators. Saturated steam enters at the inlet of the superheater, passes through a set of coils, and hot combustion gases envelop the entire tube surface to achieve very high heat transfer rates. Superheated steam leaves the superheater at the steam outlet manifold. The fuel and combustion air is controlled by a linkageless ...

Shell Mysella S3 N is a long-established and well-proven product. It is used extensively in all types of four-stroke engines burning natural and sour gas, in dual-fuel (diesel-pilot-fuel) engines and in gas compressor ...

ALZETA Corporation is a leader in commercial and industrial boiler burner technology. Our team of engineering experts stands behind our products, ensuring the burner element designed specifically for your application provides long lasting and high performance capabilities. When it comes to reliability, efficiency, and air quality control, you can trust the team at ...

Abellon is working at the forefront of the Swachh Bharat Mission and our vision is to make a significant contribution to the goals laid out under the same. We have evolved an integrated and sustainable model for converting waste into clean energy, with focus on stringent emission control and reduction in PM 2.5 levels, resulting in improved air quality, healthier people, and a cleaner and greener ...

GE integrates technology, experience, and people to deliver the highest-value simple-cycle and combined-cycle power plants anywhere in the world. This value comes from technologies that provide the lowest lifecycle cost of converting fuel into ...

RB-Technologies O2/COe analyser is the ideal equipment for fine tuning air/combustible proportions in a way to improve process efficiency without compromising safety. Combustion efficiency is determined by low-level oxygen excess in the flue gas and is limited by the production of hazardous unburnt compounds (mainly composed of H2 and CO) at low oxygen concentrations. It is thus crucial to ...

The MC range of flare stacks provides a combustion strategy which holds the gases at 1200oC for the specified retention time. This takes to its realistic limit this form of combustion control. The key to this form of technological solution is to raise the temperature of the combustion process to 1200oC and retain the combustion gases at this temperature for an extended period of ...

The LHC (Low Heat Content) Range flare is designed specifically to address the problem of combusting gases with low calorific values, or heat contents. The optimisation of combustion control techniques ensures that heat loss is minimised, whilst air and gas mixing is maintained at a very high level. In normal landfill gas flares, for example, the usual minimum methane concentration at which a ...

In cooperation with the WOODWARD Company of the United States, A kind of pre-mixed gas engine with a supercharger is developed by utilizing the internationally advanced external gas mixing method, advanced electronic control technology, and rarefied combustion control strategy. This series of products has been put on the market nearly a thousand units, cost-effective, with good control and ...