Combustion Equipment Equipment Supplied In USA

Vaprox is committed to top quality, safety, and cost in all of our products. Every product we offer is made and assembled in the United States of America. This means that you are getting a top quality product that just isn’t available from the competition. Our Tank Vapor Combustors are made with the utmost precision so they can work flawlessly with your existing system. Vaprox offers a full ...

Pair DataHawk with VentHawk systems, enclosed combustion units or production equipment burner systems for monitoring critical uptime and ...

Safe-Fire’s MB-3 oil igniter is specially designed for boilers burning higher ash content coal or operating in harsh environments.MB-3 Igniter resists erosion from the harsh secondary air and delivers smooth and trouble free ignition for large coal-fired boilers, particularly tangential firing types. Using oil as the fuel, the MB-3 provides the versatility ...

The RAPID® 2000-Series is a line of direct-fired air handlers capable of heating and pressurization. The units are available in four air styles: MUA (100% outside air with a constant discharge air volume), AM (modulating outside/return air with a constant discharge air volume), FR (fixed 20% outside/80% return air with a constant discharge air volume) and VAV (100% outside air with a variable ...

This system is designed to allow fuel gas to a pilot, ignite the pilot with use of proprietary spark igniter, and monitor using one of following technologies: Thermocouple, flame scanner, flame ...

Use low-cost Flare-gases, Ethane and NGLs as fuels for remote-site power for drilling, fracking, production, and economically-feasible enhanced oil recovery (EOR). Power gas-processing plants with excess ...

Designed for complete automatic operation of the entire Burner System, the Shand & Jurs Biogas 97311T Enclosed Flare and Touch Screen Control Panel is specifically designed to operate efficiently with low BTU anaerobic digester waste gases. The Shand & Jurs Biogas 97311T Enclosed Flare incinerates harmful emissions from waste gas streams. Typical applications include fermentation off gas ...

The turboshaft engine PBS TS100 is suitable for light helicopters weighing up to 1,000 kg. The engine offers a power take-off of up to 180 ...

The MAXFire® 100 Series gas igniter incorporates the “protected primary combustion zone” design in each of the 5 capacities available. The ignition process starts inside the guide tube away from the burner environment resulting in an extremely stable and reliable igniter. Capacities (nominal) range from 1 mmBtu/hr to 50 mmBtu/hr. MAXFire® gas igniters provide the most reliable ...

ETTER Engineering has developed a line of Enhanced Operator Interfaces, Series FMA-3X, designed to work exclusively with the SIEMENS LMV- 3 Series of Linkage-less Burner Management Systems. The Operator Interface is a color touch-screen which replaces the single line AZL for Daily Operations, and provides graphical display of operating status, parameters, faults and ...

The ETTER Engineering ControlWorx SBCP 1000 is a single burner control panel that provides basic flame supervision to a single gas-fired, pilot ignited burner. The High Temperature Limit instrument monitors furnace temperature and will shut down the burner if the measured temperature exceeds the instrument’s set-point, as well as setting of an alarm buzzer to annunciate a flame failure. ...

Designed for daily use, CoorsTek custom components for consumer and household durables are designed to provide a long life of consistent performance. We offer a large range of custom household products that take advantage of the unique properties of advanced technical ceramics, including high operating temperatures, high strength, low porosity, electrical insulation, corrosion and wear ...

The Surefire II High-Energy Ignition System is used for direct spark ignition of most gas or liquid fuels used in oil or gas igniters or main burners. The High-Energy Ignition System is available in various versions. To ensure optimal operation, the first part of the ignition tip should always be in an ignitable fuel-air mixture, during all modes of ...

Pre-engineered flare systems to reduce cost and improve delivery. Multiple flare sizes to suit the customer’s application. EPA OOOOa compliant. 40 CFR 60.18 compliant. 98%+ VOC destruction efficiency. Elevated flare with visible ...

The True-Lite Igniter is an automated igniter system intended to be used in applications where the operator needs to maintain a continuous pilot light. This superior technological advance utilizes a Programmable Logic Controller (PLC) to monitor a constant pilot light. If a failure is detected it will automatically attempt to relight the pilot light, reducing the risk of injury and decreasing ...

The CY90-F Ignition Coil is designed for use in arduous gas engine applications such as engines with large cylinders and burning low-calorific ...

The flare ignition system is one of the most critical components on any flare system to ensure the flare gas is ignited under any conditions. HERO offers the best available flare pilot technologies to meet your specific application. With thousands of pilots in service, our Hotspot Ignition System™ utilizes the most reliable ignition probe technology to ensure reliable performance you can ...

The Tornado Electric Ignition System (TEIS) is a cost-effective alternative to the pilot monitoring system that can be used for sweet gas applications where fuel gas or propane supply is not ...

Packaged Combustion Fuel Piping Systems provide tight integration of safety control, instrumentation, and critical burner fuel piping into a unitized system that is Factory Tested before shipping to your plant. Combustion Control Equipment, Burner Management Systems, and Fuel System Piping Trains are excellent examples of system components that require tight integration to comply with industry ...

Model Number: 4.3 Liter. Cylinders: 6. Combustion System: Spark-ignited. Cooling System: Water-cooled. Displacement: 262 cid (4.294 L). Compression Ratio: 9.8:1. Bore & Stroke: 4.00 in x 3.48 in (101.6 mm x 88.0 mm). Fuel Type: GASOLINE, LPG, NATURAL GAS (NG). Direction of Rotation: Counter-clockwise viewed on ...