Drive Train Technology Equipment Supplied In USA

Self-Contained & Disposable: Fully self-contained, single-use device with no need for capital equipment purchase. Power System: The Motor Drive Unit is operated by a low voltage, self-contained power system. Variable Rotating Speed: Multiple speed settings allow for rotating tip and dispersion ball to rotate between approximately 2,000 and 3,500 RPM. Single-Handed Operation: Motor Drive Unit ...

GE’s 1.85-87 wind turbine is designed for Class IIs winds, and offers an 11% increase in swept area and an extra 230 kW output at rated wind speed compared to the 1.6-82.5 turbine. The increase in blade swept area results in a 10% increase in Annual Energy Production (AEP) at 8.5 ...

GE’s 2.2-2.4MW, 107m rotor wind turbine is an advanced evolution of the 1.x series, providing a 35% increase in Annual Energy Production (AEP) over its predecessor, the 1.85-87 (at a 2.4 rating). Designed for medium wind speeds, the 2.2-2.4MW turbine provides a 51% increase in swept area with the 107m rotor, and an extra 350-450 kW output at rated wind speed compared to the 1.85-87 turbine, ...

IOXUS, the only fully integrated ultracapacitor design and manufacturing facility in North America, maintains the highest standards and delivers the most flexible problem-solving methods for storing and delivering power. Our Titan ultracapacitors were designs specifically to handle harsh mechanical, electrical, and environmental conditions found in transportation markets. We use a propriety ...

When a drive unit is attempting to rapidly brake a motor “Deceleration Braking Cycle” or when an “overhauling load” condition exists, the spinning motor acts as a ...

With 3 sizes, 6 distinctly different models and manual or hydraulic steering, MBW LOWRIDERS cover the full range of floating and finishing applications. LOWRIDERS have been in production for over 25 years and played an important role in the pioneering and development of riding trowels. Decades of experience has resulted in the industry's lowest maintenance line of high performance ride-on ...

SSI offers both electric and hydraulic drives in direct drive arrangements that feature a high-efficiency, force-balanced planetary gearbox that provides speed reduction and torque amplification. SSI Shredding Systems splines the planetary gearbox directly onto the drive shaft. The planetary gearbox offers several standard gear ratios. That means if applications change, owners have the ...

RGC’s Cantilever lifts are ideal for PWC’s or small boats up to 1,200 lbs. The Cantilever offers solid protection and is easy to install and adjust. All lifts come standard with a 30″ handwheel. Or upgrade to power with an optional friction drive or an AC/DC drive with remote control available. Built with only high quality 6061-T6 Marine Grade Aluminum, the Cantilever lift is ...

Hydraulic power units for all heavy duty applications, D&D Power Units are designed and manufactured for quality & trouble-free operation under the severest conditions. Featuring a centralized control and gauge panel for ease of start up and systems monitoring, The Rugged One comes complete with fully automatic safety shutdown, including low hydraulic oil, oil temperature, engine oil ...

Westinghouse, through its subsidiary PaR Nuclear, Inc., has developed a packaged solution to modernize obsolete and aging motion systems using Schneider Electric Altivar motor drive technology. This design has undergone extensive testing and is now available so that customer equipment operates reliably and ...

Demountable, forged steel brake rims are 42' diameter x 12' wide, Brakes are cooled by circulating water, Drum shaft diameter is 7', Single line pull is 51,800 lbs., Design with 2 x 762 motors 600 HP, Two speed transmission shaft, High and low speed clutch assembly, Wichita 325 Auxiliary brake ...

The GE 1.85-82.5 is the turbine of choice for IEC class II winds, and provides over 7% more AEP than the 1.6-82.5 at 8.5 m/s. The 1.85-82.5 turbine is available in tower heights of both 80 and 65 meters. These tower sizes both provide flexible options for Class II wind sites,as well as higher energy capture in a variety of challenging ...