Electrical Power Equipment & Supplies In Ohio

The KOLLER 2-Split Offshore Wireline Unit has been designed for measurements, slickline and e-line activities with wire capacities above 7,650 m / 25,000 ft. It is suitable for both offshore and onshore applications. The 131 HP guarantees maximum pull force and speed at any depth, even with heavy tools. One of the new features of the power pack is a maintenance free flame trap together with a ...

A versatile power-to-heat solution from Bosch for local and district heating, building heating, process heat or as redundancy for other energy generators. - Generating heat 100 % electrically – without any flue gas - Reducing CO2 emissions: Using surplus power from photovoltaics, hydropower and wind power - Electric heat system from a single source and simple system integration - Fast ...

DI’s compact moveable rotary kiln incinerator is our smallest thermal treatment system and unique in its kind. It’s the ultimate treatment solution for small waste volumes, remote areas, temporary or permanent cleaning projects, disease control and many other ...

The HT5E power unit is driven by a 10HP electric motor for use where electric power is available. It is designed to drive several of our pump models including the S3T, S3TC and S6P. Other hydraulic tools and equipment may also operate from this power ...

This is a 50 Ohm external shunt resistor with 0.1% accuracy. One is required for each 4-20mA input on Monarch’s DC6000 Paperless ...

The HT30EV power unit is driven by a 30HP electric motor for use where electric power is available. It is designed to drive several of our pump models including the S4CSL, S4VHL and S4SHR. Other hydraulic tools and equipment may also operate from this power ...

Limited fuel quality testing must be performed annually using appropriate ASTM test methods is recommended as a means to determine that existing fuel inventories are suitable for continued long term ...

Tube–tube heat exchanger (TTHE) is a low cost, vented double wall heat exchanger which increases reliability by avoiding mixing of fluids exchanging heat. They are manufactured as a fully-welded design, with removable end caps and insulated if ...

The Sirocco is our smallest and most portable waste incinerator and has been designed to be easy to relocate and use almost anywhere. Requiring just a small amount of electricity to power the fan - no other fuel source is required. The efficient process reduces waste to as little as 3% of its initial volume. It uses cyclonic air technology by using the high-pressure fan to pull air into the main ...

High-resolution Power-R-decade with current and voltage measurement. Remote control via ...

The HT150EV power unit is driven by a 150HP 460 V, 3Ø, TEFC electric motor for use where electric power is available. It is designed to drive several of our pumps or other hydraulic equipment and tools. Several control options are ...

The KOLLER Offshore Wireline Unit has been designed for measurements and workover activities with wire capacities above 7,650 m / 25,000 ft. It is suitable for both offshore and onshore applications. The 131 HP guarantees maximum pull force and speed at any depth, even with heavy tools. One of the new features of the power pack is a maintenance free flame trap together with a fault analytic ...

The HT10E power unit is driven by a 10HP electric motor for use where electric power is available. It is designed to drive several of our pump models including the S3T, S3TC and S6P. Other hydraulic tools and equipment may also operate from this power ...

Specac’s Atlas Power hydraulic press is available in 8 Ton, 15 Ton, and 25 Ton load configurations for industrial XRF applications and other laboratory sample pressing ...

Incineration is a waste treatment process that involves the combustion of organic substances contained in waste materials. Incineration and other high-temperature waste treatment systems are described as “thermal treatment”. incineration of waste materials converts the waste into ash, flue gas and heat. The ash is mostly formed by the inorganic constituents of the waste and may take ...

Development of electrical panels of medium power with or without PLC, or boards for the management of feed mills complete with screens and declaration of ...

The HT20EV power unit is driven by a 20HP electric motor for use where electric power is available. It is designed to drive several of our pump models including the S3CML, S3VHL and S4T. Other hydraulic tools and equipment may also operate from this power ...

Biogas is one of the most used sustainable sources for energy production. It is a gaseous mixture derived from anaerobic digestion and from the decomposition of any organic animal or vegetal matter, such as zootechnical waste and its byproducts. These biomasses are mixed and maintained without oxygen at a mesophilic temperature of 39-42°C. Eliopig offers the best technological solutions for ...

Thehydraulic power packsare based on diesel engines, compliant with the latest emission requirements, or electric motors built with cutting-edge ...

The KOLLER Slickline Alu Unit has been designed for workover activities with special weight restrictions. The 2-skid layout is separated in a winch / operators module and a hydraulic power pack. The hydraulic pump / motor combination guarantees high pull force and speed at any depth. The unit starts with a spring-starter which makes the system independent of any external power supply. The modular ...