Flares Equipment Supplied In Canada

The 1″ Copper Nut is used when attaching a new 1″ copper line to be pulled in behind the 1″ Water Line Bursting Heads (such as TT-WDGE-1WED). The Copper Flaring Tool (TT-WDGE-CFT) is used to flare the new copper pipe before it is attached to the head using the 1″ Copper Nut. Be sure to put the nut on the new pipe before flaring it! The Manufacturer’s user guide is ...

AERZEN process gas compressors are installed as single or multiple stage units in chemical, petrochemical, raw material and energy producing plants and in many other production centres of the processing industry all over the world. The unit is ideally suited for dry compression of all gases in chemical and petrochemical industries. Technical Data: Suction volume flow up to: 75.000 m³/h, ...

The BGR Cube is a highly versatile, low cost vapour combustor designed to destruct volatile organic compounds (VOCs) and BTEXs produced from casing gas, pneumatic devices, or storage tanks. The BGR Cube eliminates the need to install expensive vapour recovery units (VRU) or uneconomical incinerators that provides an economical alternative to venting or ...

PermianChain offers a digital energy market for oil and gas. We tokenize wasted and previously stranded natural gas that is converted into field-generated power. This process allows PermianChain’s global network of blockchain projects to secure much needed power at low-cost. PermianChain Supplier helps you reduce emissions, improve your carbon footprint, and monetise flared and stranded ...

Inclusive Energy’s 2000 BBL tanks are manufactured to exceed industry standards. They are designed in accordance with API 12F, 620 and 650 design specifications, including dimensions and internal and external pressures. Our tanks are externally insulated and we also offer 100% internally coated models. Available for sweet or sour projects. All of our storage tanks are built for the option ...

The TCI-3000 is an environmentally friendly alternative to flaring. Combustion efficiency is 99.8% resulting in no smoke, no odor, and no visible flame during normal operations. This is a preferred method when operating in sensitive areas such as near residents. TCI products are also robust, simple to use and require very little ...

The TCI-4000 is an environmentally friendly alternative to flaring. Combustion efficiency is 99.8% resulting in no smoke, no odor, and no visible flame during normal operations. This is a preferred method when operating in sensitive areas such as near residents. TCI products are also robust, simple to use and require very little ...

Precise and robust gas flow meter for flare gas or flare stack applications: Our ultrasonic gas flow measuring instrument FLOWSIC100 Flare-XT is designed for flare gas measurement or flare metering. The high-resolution measurement and innovative sensor design is being developed for most efficient uses in petroleum refineries, natural gas processing or offshore and onshore oil and gas plants. ...

DuraCool Professional All Brass Can Tapper. 1/2″ Acme by 1/4″ M Flare. Blister pack. 6 units per ...

Designed for complete automatic operation of the entire Burner System, the Shand & Jurs Biogas 97311T Enclosed Flare and Touch Screen Control Panel is specifically designed to operate efficiently with low BTU anaerobic digester waste gases. The Shand & Jurs Biogas 97311T Enclosed Flare incinerates harmful emissions from waste gas streams. Typical applications include fermentation off gas ...

Designed for gas well locations where high volumes of gas are blown down for maintenance reasons. The large integral base knockout ensures that condensates flowing from the well are contained in the knockout and not sprayed around causing a dangerous condition. These can be guy wire or self-supporting depending on available space and ...

Common Features: 4” x 40’ Single Tongue Tandem Axle. 4” Main, 2” Auxiliary. Zero Ground Disturbance. 12V Self-Contained Hydraulic Lift System. 7000 lb Jacks. Continuous Electronic Ignition System ...

Advanced Energy's E2T Quasar M8100 series instruments provide continuous monitoring and detection of flare stack pilot (PM), smoke (SM), and flares (FM). Flame detection up to 400 m away. Detection of hydrocarbon and hydrogen flames. CSA/US and ATEX explosion-proof housing. Automatic gain control for adverse weather conditions. Modular opto-electronic package for easy removal from ...

In applications where there are no immediate safety concerns regarding the combustion of waste gas, but there is still a desire to hide visible flame and reduce odour concerns, Tornado can offer an enclosed ground ...

Tornado's High Pressure or Low Pressure gas-assisted flare stack designs can eliminate smoke (HP Gas-Assist) or sour gas odours (LP Gas-Assist) on site. These designs can also be used to ensure efficient combustion in the most challenging of weather ...

The Pit Flare (or “Burn Pit”) is usually constructed of an excavation lined with a non-combustible lining of rock or refractory material. Often coupled with a pit liner, our pit flares can be a cost-effective combustion option for an environmentally conscious user. Our high efficiency burner produces a mixture of vapor and liquid from a single source. While most often designed to ...

Utility flares (DU series) are one of the most common flare designs use for applications with no smokeless burning requirements. They are also utilized in applications where smokeless flaring can be achieved without the use of an additional assist ...

Flame front generators are effective, time proven ignition systems which have been widely used in flaring applications for decades. The inherent reliability, rugged construction, ease of operation, and its economic advantages have allowed the flame front generator (FFG) to remain one of the most popular forms of pilot ignition in the industry. The FFG is easily adaptable to any pilot system which ...

The dynamic (velocity) seal is a simple innovation which ensures significant cost savings over time. The reverse conical baffle design reduces flow area in the flare tip while simultaneously increasing purge gas velocity. In combination with the dynamic seal, a constant flow of purge gas will maintain a seal in flare system, ensuring that air infiltration does not occur. A vortex effect is ...

Whenever a process requires that entrained droplets be removed from a vapor stream, a knockout drum should be integrated into the system. Condensation can occur when hot process gases cool considerably in the flare gas header and riser, and some gases also go to dew point at ambient temperatures and pressures and can therefore generate liquids. These droplets must be removed in order to avoid the ...