Fuel Cell Monitoring Equipment & Supplies In Ohio

Cell scanning: Double Cell DC (2C). Contact design: 0.5 mm spring wire with S-shape. Contact bearing: In PCB one side with redundant contact pin. Interlocking type: Friction lock in pinhole, additional hold-down possible. Contact pitch min.: 2.030 mm. Pinhole/ Geometry: Pin shape punched in bipolar plate foil. Bipolar plate material: Metal. Connection type: Flexcard. Benefit (USP): Design for ...

The CVM solution CVM Ex is aimed at cell voltage monitoring in stationary applications. Important features are the explosion protection, which is realised by housing the measuring modules in an Atex-certified enclosure, as well as the modular design, which enables high scalability and individual customer ...

The G6S CVM solution was specially developed for cell voltage monitoring in series applications. It is scalable, allowing both single cell measurements and voltage measurements across two or four cells. The measurement modules are supplemented by a target market-specific head module, which is equipped with the data interfaces prevalent in the respective target market. The head module also offers ...

In addition to standard test signal cables, we also offer customised high-voltage wiring harnesses and adapter cables for your project. All wiring harnesses are manufactured in top automotive quality in our wiring harness factory in ...

The CVM G5S module was specially developed for cell voltage monitoring in series production vehicles. The performance features are limited to the range of functions actually required in series production. At the same time, the single-board solution offers high robustness in long-term operation and a production volume relative cost ...

The V3 seriesall-in-one fuel cell PCU converter integrates a fuel cell DC/DC boost converter(DCF), a 24V output DCL, a high-speed air compressor controller (FCC MCU) and ahigh-voltage power distribution unit (PDU). It saves the space of thehigh-voltage electrical system and simplifies the design and installation ofthe power ...

Modular test systems for fuel cell technology: With test systems, made by KRATZER AUTOMATION you will gain the benefit of having a solution which will allow you to carry out multiple tasks in the field of proving and testing of fuel cell technology for vehicle ...

Stackable cell voltage monitoring (CVM) system designed for H2 fuel-cell stack research, testing and applications. CVM system can be used to prevent damage to individual cells, to monitor lifetime conditions, and to ensure optimal working conditions in applications. CVM64H module is ideal for testing and research purposes. CVM64H module is designed as a precise automotive-ready solution with ...

Highly compact, high-speed, electrically driven radial turbo compressor with gas bearing and integrated converter for the circulation and compression of various gases and ...

The MOBISUN HYBRID Power Trailer is specifically designed to meet the demanding power needs of Wind Lidars in urban, rural, and remote locations. Unique for the wind assessment market that requires 24/7 reliability, the MOBISUN Hybrid combines the clean renewable energy of solar power generation with a fully integrated methanol fuel cell power generation system with methanol fuel cartridges as ...

GenDrive fuel cell-powered pallet jacks run faster, maintaining rapid momentum during an entire shift, even in environments with temperatures as low as -22ºF. Time spent dealing with depleted batteries is now regained for revenue-generating ...

Hyzon’s HyHD8-110 is a hydrogen fuel cell electric powertrain designed for heavy-duty applications. The powertrain delivers a peak power of 450 kW (612 hp) and continuous power of 275 kW (374 hp). Equipped with a 110 kW hydrogen fuel cell and a high voltage battery of 110 kWh, the vehicle boasts impressive torque figures of 1,180 lb-ft continuous and 1,770 lb-ft peak. It supports a driving range ...

The MOBISUN Solar Power Trailer is specifically designed to meet the demanding power needs of construction site applications in urban, rural, and remote locations to replace diesel generators. The MOBISUN provides 100W continuous output of clean, quiet, odorless energy. This rugged single-axle trailer has a fully-integrated 2kW solar array for power generation to charge the AGM bank inside the ...

Stackable CVM system designed for H2fuel-cell stack research and applications. CVM system can be used to prevent damage to individual cells, to monitor lifetime conditions, and to ensure optimal working conditions in applications. CVM32A module is designed as a cost-effective solution mainly for applications. For research, automotive, testing and precision application see CVM24P or TEVOMET. ...

Stackable cell voltage monitoring (CVM) system designed for H2 fuel-cell stack research, testing and applications. CVM system can be used to prevent damage to individual cells, to monitor lifetime conditions, and to ensure optimal working conditions in applications. CVM24P module is ideal for testing and research ...