Gas Boosters Equipment Supplied In USA

The GMD series, made by AERZEN, is the universal gastight booster solution for the low pressure range. Equipped with a magnetic coupling, it ensures a maintenance-free sealing concept. Locking systems for sealing the drive shaft are completely eliminated and allow a low-maintenance machine concept. The separation between oil and process side is achieved by a special piston ring ...

After H2S removal the gas is fully saturated with water; the relative humidity (RH) is 100%. If water droplets should reach the cylinder heads and combustion chambers the water will destroy the oil film. This will lead to increased wear of moving parts as well as substantial reduction of the lifetime of the engine oil. Therefore, it is necessary to dry the gas to avoid condensation in the pipe ...

The InVerde e+ module is the first and only clean natural gas engine-driven cogeneration system able to operate within the extremely low levels of regulated pollutants allowed by the distributed generation regulations for 2007 set by the California Air Resources Board (CARB). The InVerde e+ emissions not only meet but exceed the stringent CARB 2007 regulations by utilizing our technology ...

Natural gas utilities face multiple emerging challenges that require the deployment of innovative solutions—and a renewed focus on the customer—to meet. From decarbonization to non-pipe alternatives, energy equity, efficiency programs, customer experience, or system operations, Copper Labs’ data-driven platform helps gas utilities meet evolving needs (no matter what types of ...

This system is designed to evaluate dry gas compressor seals and it automates the 4-6 hour testing that is performed on each set of seals. Vidac high pressure testers include a full complement of support equipment. We have integrated the actual high pressure controls, valving and instrumentation into a control system that provides tightly controlled pressure and speed regulation. We also ...

Biogas Blowers, based on Positive Displacement Rotary Blower principle, have been specially developed for pumping and conveying bio gas. These biogas blowers are generally used in biogas lines to boost the gas pressures to meet the burner input demand. These biogas and specialty gas blowers are generally vertical in construction (i.e. the suction end is at the top and discharge is at the bottom) ...

That Micro Turbine represents the standard micro turbine product and it is used in most of current installations in Industrial Application (food industries, chemical & petrolchemical, plants etc.) and Civil Application (hospitals, swimming pools, hotels).The low maintenance requirements of the AE-T100, with service intervals of 6,000 operating hours, makes this power generation system ...

The PAMP, can stimulate your well’s plunger operations by removing the fluids above the plunger and reinjecting the gas through the annulus to increase run efficiency and decrease the down-time for pressure ...

The spent byproducts of distilleries have historically been treated as waste. However, the liquid and solid wastes of the distillation industry have greater potential and can be sent to anaerobic digesters and converted into biogas. This biogas in turn can be turned into renewable electricity at high efficiency via GE Jenbacher gas ...

The future-focused innovation you need, combined with the reliability, expertise, and support you expect. Revolutionizing gas compression with smart, sustainable technology, Q-Drive is an electric servo actuated Compressed Gas System with unprecedented 4.0 intelligence, efficiency, precise control and accuracy. It delivers unrivalled performance, reliability, and safety. Plus, an advanced control ...

H-Drive from Haskel is a technological evolution in the gas compression market. Designed by our team of knowledgeable experts, H-Drive Booster is configurable to a wide range of critical high pressure applications in a variety of diverse fields and hydraulic systems. It has been engineered to safely and reliably handle flows required for critical, high-pressure gas compression and transfer needs, ...

Fuel gas boosters or blowers are used to raise the pressure of fuel gas to the operating level of the gas engine or combined heat and power plant. Gas boosters are often required for biological gas applications where the pressure level of the biogas holder is below ...

Bearing housings : Cast iron EN-GJL-250. Head, Sections : Cast aluminium EN AC-42000. Joint sealing compound: RTVIS502 Silicone. Seals (gas) : Lip seals + V-Ring. Shaft : Stainless steel 42CrMO4.Bearings : Ball bearings 6206 C3. Impellers : Cast aluminium EN AC-43100. Motor pedestal : Structural steel. Base frame installation : Antivibrations pads. Noise level : In compliance with ...

Bearing housings : Cast iron EN-GJL-250. Head, Sections : Cast aluminium EN AC-42000. Joint sealing compound: RTVIS502 Silicone. Seals (gas) : Lip seals + V-Ring. Shaft : Stainless steel 42CrMO4. Bearings : Ball bearings 6206 C3. Impellers : Cast aluminium EN AC-43100. Motor pedestal : Structural steel. Base frame installation : Antivibrations pads. Noise level : In compliance with ...

Elliott's high-speed, high-efficiency multi-valve steam turbine combines the reliability of an impulse style turbine with the efficiency of a reaction style turbine to provide outstanding performance in a range of refinery services. Designed to API 612 standards, the turbine has a small footprint but packs a powerful punch, offering a technical leap forward in speed and efficiency. At typical ...

AEREON's halogenated thermal oxidizer systems are designed to handle hazardous halogenated streams produced from various chemical processes in a safe and effective manner. Systems are designed to maintain high destruction efficiency of the compounds with an effective high chamber temperature and residence ...

Disposal and treatment of biological waste represent a major challenge for the waste industry. For a wide range of organic substances from agriculture, foodstuff of feed industries, anaerobic digestion is a superior alternative to composting. Biogas – a mixture of both methane and carbon dioxide – is created during anaerobic digestion and serves as a high-energy renewable fuel that ...

Martin Energy Group Services custom engineers and designs power generation packages and enclosures to provide solutions for your power generation needs and specifications. Our professionally engineered and manufactured sound-attenuated enclosures are custom designed for your application and offer the ease and flexibility of “flange to flange” installation. These modular gen-set ...

A flexible and efficient air-driven gas booster for delivering high-pressure gases. Haskel designs and manufactures gas boosters that are the industry benchmark for durability, safety and reliability. Used for virtually all industrial gases and ideal for gas pressure increases, high pressure gas transference, cylinder charging, and scavenging, Haskel pneumatic-driven gas boosters can produce ...