Gas Combustion Equipment & Supplies In Ohio

Continental Controls Corporation’s designed the FT50 pre-assembled with 2″ valves for hassle free installation. The FT50 is applicable with various engines and fuels such as natural gas and propane, etc. The fail safe rapid shutdown response stops gaseous fuel flowing through in less than 200 milliseconds. Its operation relies on a spring-loaded piston within the valve to be moved by the supply ...

The EGC6 is a highly efficient electronic gas carburetor designed for industrial and power generation engines. It can operate on a wide range of gaseous fuels, including biogas and low BTU gas, and has advanced electronic fuel control capabilities to precisely regulate fuel flow. The EGC6 is easy to install and can be adapted to a variety of AFR controls and carburetors, making it a versatile ...

Low nitrogen oxide combustion technology is to improve the combustion equipment or control the combustion conditions, using a variety of combustion means in the furnace to control the production of NOx in the combustion process, in order to reduce the NOx in the tail gas of the combustion ...

The conventional fired boiler generates thermal heat or process heat while simultaneously utilising the heat potential from waste heat sources. Conventional fired heat generator with additionally integrated smoke tube pass for waste heat utilization. Environmentally friendly generation of thermal heat or process heat through the utilisation of waste heat sources. High supply reliability thanks to ...

CCC's Electronic Gas Carburetor (EGC) precisely controls the air/fuel ratio using variable pressure control combined with an advanced and improved mixing venturi. CCC offers an innovative and state-of-the-art approach to Gaseous Fuel Carburetion for most gas engines in the range of 10 to 500 horsepower. The EGC provides built-in control for a wide band Oxygen sensor that is in the exhaust ...

The Continental Controls Corporation AGV pilot valve is a critical component of gas turbine engine control systems. It is a compact, lightweight, and easy-to-install device that helps to improve engine performance and reliability. The AGV pilot valve is responsible for controlling the flow of fuel and air in the engine, ensuring that the engine operates at optimal levels of efficiency and safety. ...

ACME Steam Superheaters are available for operating pressures of up to 800 PSIG and temperatures up to 1200 deg. F. Steam flow is only limited by practical size considerations. Pressure sections are built to ASME code with National Board or CRN registration. Burners are AGA or CGA listed with UL, CSA or other gas train standards as requested or applicable. The ACME Steam Superheater is delivered ...

Continental Controls Corporation’s FT10 comes pre-assembled with 1 ½” valves, ensuring convenient installation. The FT10 is compatible with various fuels, including natural gas, propane, and more. The Fuel Train isolation valve provides shutdown on a gas turbine by rapidly halting gaseous fuel flow. The valve utilizes the supply pressure to move a spring-loaded piston. When the valve is ...

The heating boiler UT-L offers high performance and is extremely compact. The design complies with the Gas Appliances Regulation. - Very high efficiency up to 105% for optimised energy costs - Compact design for easy positioning and effective use of heat - Flexible application and low return flow temperature of 50 °C possible - Specific control concept and optional real-time monitoring - ...

Using heated ZrO2 sensor for wet O2 analysis up to 600°C flue gas temperature. With optional special heated solid electrolyte sensor for combustibles measurement ...

The ACME-SLIM packages represent 40 years of experience in electric heating, temperature control, and manufacture of large integrated package ...

The IMR 550P device is for the cleaning of gases and is suitable for use in conjunction with all gas measuring and analysis instruments. It is encased in a handy portable case. It is especially designed for use with the IMR 1400 and IMR 2800 series or any other type of combustion gas analyzer. The gas is filtered by the 3 micron filter and then heated by the sampling hose. The unique ...

Following many years of R&D and development in the thermal treatment arena. Inciner8 have launched a range of cremation ovens. Most notably is the development of the world's first truly mobile cremator. Utilising hot hearth technology and 4 chamber post combustion gas processing these models are state-of-the-art and will provide many years of trouble-free ...

Acme electric hot water boilers are economical units that deliver maximum kilowatts in minimum space requirements. Ideal for new boiler applications or as a replacement unit to upgrade existing applications. This model takes up less floor area and fits through smaller openings than oil or gas-fired units. Easy and economical to install, available in sizes from 9 KW to 2600 KW at all common ...

Computer-controlled gas mixture generation for interference and response sensitivity test, linearity test, and calibration. Used for quality assurance of analyzers or gas sensors in labs, service, and working gases in production ...

The IMR 500-P is a portable A/C powered sample dryer. It can use used with any gas measuring instrument. IMR recommends pairing it with an IMR 1400 or IMR 2800 gas ...

Aker Clean Carbon is leading SOLVit – a major scientific research and development programme to produce improved, cost-effective amines for the CO2 capture process. This eight-year NOK 317 million programme was launched in 2008 together with Sintef, an independent research organisation, and the Norwegian University of Science and Technology ...

Sabien’s M2G boiler load optimisation control prevents boiler dry cycling, an inherent and well known problem with the majority of commercial and industrial boilers, regardless of their age or ...

Ventilation systems will cause negative air pressure in the building during winter seasons when the windows and doors are shut. This reduces the effectiveness of the ventilation system and can create excessive cold drafts and cooling of the building on very cold days – resulting in an intolerable workplace and potential freezing of ...

It gives the customer an opportunity to convert existing boilers into production units with renewable fuel at a lower capital cost than building a new boiler. The existing fuel is still available and can always be used as back up or topping up. When installing a new combustion system in an existing boiler the customer get a dual or triple fuel installation and can choose the most preferred fuel ...