Gas Combustion Equipment Supplied In USA

The IMR 500-P is a portable A/C powered sample dryer. It can use used with any gas measuring instrument. IMR recommends pairing it with an IMR 1400 or IMR 2800 gas ...

ACME Steam Superheaters are available for operating pressures of up to 800 PSIG and temperatures up to 1200 deg. F. Steam flow is only limited by practical size considerations. Pressure sections are built to ASME code with National Board or CRN registration. Burners are AGA or CGA listed with UL, CSA or other gas train standards as requested or applicable. The ACME Steam Superheater is delivered ...

The IMR 550P device is for the cleaning of gases and is suitable for use in conjunction with all gas measuring and analysis instruments. It is encased in a handy portable case. It is especially designed for use with the IMR 1400 and IMR 2800 series or any other type of combustion gas analyzer. The gas is filtered by the 3 micron filter and then heated by the sampling hose. The unique ...

Continental Controls Corporation’s FT10 comes pre-assembled with 1 ½” valves, ensuring convenient installation. The FT10 is compatible with various fuels, including natural gas, propane, and more. The Fuel Train isolation valve provides shutdown on a gas turbine by rapidly halting gaseous fuel flow. The valve utilizes the supply pressure to move a spring-loaded piston. When the valve is ...

Continental Controls Corporation’s designed the FT50 pre-assembled with 2″ valves for hassle free installation. The FT50 is applicable with various engines and fuels such as natural gas and propane, etc. The fail safe rapid shutdown response stops gaseous fuel flowing through in less than 200 milliseconds. Its operation relies on a spring-loaded piston within the valve to be moved by the supply ...

The Continental Controls Corporation AGV pilot valve is a critical component of gas turbine engine control systems. It is a compact, lightweight, and easy-to-install device that helps to improve engine performance and reliability. The AGV pilot valve is responsible for controlling the flow of fuel and air in the engine, ensuring that the engine operates at optimal levels of efficiency and safety. ...

Using heated ZrO2 sensor for wet O2 analysis up to 600°C flue gas temperature. With optional special heated solid electrolyte sensor for combustibles measurement ...

CCC's Electronic Gas Carburetor (EGC) precisely controls the air/fuel ratio using variable pressure control combined with an advanced and improved mixing venturi. CCC offers an innovative and state-of-the-art approach to Gaseous Fuel Carburetion for most gas engines in the range of 10 to 500 horsepower. The EGC provides built-in control for a wide band Oxygen sensor that is in the exhaust ...

Acme electric hot water boilers are economical units that deliver maximum kilowatts in minimum space requirements. Ideal for new boiler applications or as a replacement unit to upgrade existing applications. This model takes up less floor area and fits through smaller openings than oil or gas-fired units. Easy and economical to install, available in sizes from 9 KW to 2600 KW at all common ...

The ACME-SLIM packages represent 40 years of experience in electric heating, temperature control, and manufacture of large integrated package ...

The EGC6 is a highly efficient electronic gas carburetor designed for industrial and power generation engines. It can operate on a wide range of gaseous fuels, including biogas and low BTU gas, and has advanced electronic fuel control capabilities to precisely regulate fuel flow. The EGC6 is easy to install and can be adapted to a variety of AFR controls and carburetors, making it a versatile ...

Ventilation systems will cause negative air pressure in the building during winter seasons when the windows and doors are shut. This reduces the effectiveness of the ventilation system and can create excessive cold drafts and cooling of the building on very cold days – resulting in an intolerable workplace and potential freezing of ...

TSI supplies a variety of burners for their dryers. This includes Gas Burners, Fines Burners and Reciprocating Grate Furnaces. These are usually directly connected to the dryer & controlled as part of one integrated system. A Fines Burner will burn wood dust in a cyclonic cloud and can be supplied in single or staged combustion iterations. The furnaces burn wet bark on a stepped grate that ...

Fast, Accurate, Specific: Specific to methane only, not combustible gas generally. Sensitive to 0.1 ppm methane. Tunable diode laser in the mid-IR, a hundred times more sensitive than near-IR methane peak. Vehicle can be operated at 25-30 ...

The cabinet or bench oven is used to describe small batch equipment. Wisconsin Oven offers various sizes in two models, the SBH and the ...

Modern day key industry components are often exposed to high and highest temperatures and require the use of innovative high-temperature alloys. These usually heat-resistant or high-temperature materials have found a wide range of applications not only in furnaces and heat treatment plants, but they are also used as a substrate material for heavily stressed metallic catalysts. Other typical ...

Designed for complete automatic operation of the entire Flare System, The Shand & Jurs Biogas 97301T Waste Gas Burner and Touch Screen Control Box are designed to combust biogases generated in fermentation processes. It efficiently incinerates low BTU gases from anaerobic digesters, lagoons, and municipal landfills, minimizing odors and VOC's. The stoichiometric pilot ensures that a proper ...

Aqua Blast is your source for hot water electric power washer units, which cut through grease and oil to wash these substances away completely, leaving no residue or stain behind. Kerosene, fuel oil, liquid propane, or natural gas burners are available. Aqua Blast electric hot water units are suitable for challenging industrial cleaning jobs. Units are available in single phase or three phase, ...

Hand-held high energy exciter puts heavy-duty ignition power in the palm of your ...

SINC Thermal LLC offers industrial immersion furnaces designed to provide efficient heat treatment for a range of metalworking processes. These furnaces are essential in operations requiring uniform heating and thermal management. Built for durability and precision, the immersion furnaces are tailored to meet the demanding needs of manufacturing environments, ensuring optimal energy consumption ...