Gas Infrastructure Equipment & Supplies In Ohio

211 equipment items found
  • Premium
    based in CHINA

    Based on infrared gas absorption analysis method, TVAS-5000 calorific value analyzer adopts intelligent digital processing technology to realize the analysis process of gas concentration value and calorific value in gas. It has the characteristics of high degree of automation, strong function, easy operation and digital ...

  • Premium
    based in CANADA

    ACME Steam Superheaters are available for operating pressures of up to 800 PSIG and temperatures up to 1200 deg. F. Steam flow is only limited by practical size considerations. Pressure sections are built to ASME code with National Board or CRN registration. Burners are AGA or CGA listed with UL, CSA or other gas train standards as requested or applicable. The ACME Steam Superheater is delivered ...

  • Premium
    based in AUSTRIA

    Before the coarse filtered bio or sewage gas can be fed to the gas consumer it is normally passed through a ceramic fine fillter. Here the gas is passed through a ceramic or reclay unit with a pre-determined pore diameter. Fine particles < 150 – 210 μm and condensate vapour are effectively removed. This eliminates any possible damage to components further on in the gas processing ...

  • based in USA

    Standby generators offer a steadfast solution to extended outages. Unlike portable generators, they’re installed permanently and will provide uninterrupted backup power. Blackouts are nothing new, but major storms over the past two years have hammered home the importance of electrical power. A standby generator can ensure your business remains energized for days. MEG can provide solutions ...

  • Biogas torch is a kind of environmental protection treatment method for combustible gas which has a wide range of applications. It has a high degree of automation and good reliability. It can be used for coal chemical industry, synthetic chemical industry, metallurgy, natural gas, industrial biogas, paper mill biogas, sugar mills biogas, municipal sludge anaerobic biogas,starch plant biogas, ...

  • based in USA

    The InnoSepra Renewable Natural Gas Technologies include technologies for removal of siloxanes and VOCs, technologies for producing 90-93% purity gas suitable for on-site power generation and CNG, and technologies for producing pipeline quality gas at very high recovery. These technologies have lower operating cost, capital cost, and CI (Carbon Intensity) Score compared to current gas upgrading ...

  • Manufactured by Hilliard Corporation
    based in USA

    24 volt DC power. Solenoid actuated Positork drive. Output torque up to 80 ft lb. Splined output for gas turbine applications. SAE 3 mounting flange, multi-position. CW and CCW direction of ...

  • Manufactured by Clarke Energy
    based in UNITED KINGDOM

    A captive power plant is a facility that is dedicated to providing a localised source of power to an energy user. These are typically industrial facilities or large offices. The plants may operate in grid parallel mode with the ability to export surplus power to the local electricity distribution network. Alternatively they may have the ability to operate in island mode; i.e. independently of the ...

  • Manufactured by Brave a GNE Brand
    based in USA

    The Brave Pro 18-in. trencher is used for digging through compacted gravel and soils to install electric wires, gas lines, water lines, and more. A reliable Honda engine powers the BRPT18 and is compact enough to fit through most gates and doorways, making it easy to transport from job to job. The max 18-in. depth and 3-in. trench width dig deep enough for laid pipes and wires to remain safe ...

  • Manufactured by Flex Energy Solutions
    based in USA

    Cogeneration, also known as combined heat and power (CHP), is the simultaneous production of electricity and heat from natural gas. Flex Turbines® recover the heat normally lost in traditional grid electricity generation and use it for heating, cooling, dehumidification and other ...

  • Manufactured by OG Power
    based in UNITED KINGDOM

    Main bearings. Camshaft bearings. Conrod bearings and bushings. Thrust rings. Available for ge jenbacher series 3 and ...

  • based in SOUTH KOREA

    Sliding type line blind has a unique gear set mechanism that makes a gap to slide in/out a blind plate without pipe joint stretching. It provides a safe and time efficient blinding process. SAMMI’s sturdy and simple design creates highly reliable and durable line blinds using the most advanced ...

  • Manufactured by Gastechnik Himmel GmbH
    based in AUSTRIA

    The series NTF is designed as a start-up and emergency flare (according to TA-Luft) with open burning. Area of deployments; Thermal disposal of combustible surplus gases such as in biogas, sewage and landfill gas plants. Various special gases. The automatic gas stocker controls fully automatically the electronic ignition and automatically monitors the flame during the operation. ...

  • based in SOUTH KOREA

    Goggle type line blind is a good solution to isolate large diameter, high temperature and/or toxic gas pipelines for maintenance and ...

  • based in SOUTH KOREA

    EX type Line blind offers 100% pipe isolation for hazardous service conditions such as extremely high temperature, cryogenic, gas/liquid contained particles and/or polymer production pipeline. The unique stretching mechanism creates a gap to switch blind plate positions quickly and ...

  • based in SOUTH KOREA

    Compact type line blind is designed for replacing an existing valve with limited F-F distance, large diameter pipeline or limited space installation. SAMMI’s compact design provides weight reduction and removes the need for extra pipe ...

  • based in FRANCE

    We make complete biogas lines, that covers all the equipment necessary to the good functioning of the ...

  • based in CANADA

    <p "header5"="" style="color: rgb(51, 51, 51); font-family: Verdana, Geneva, sans-serif; font-size: 12px;">Highland has the knowledge, expertise and experience to analyze, assess and implement landfill gas projects that will provide environmental solutions as well as economic benefits to all concerned. The major factor in determining the success or failure of any landfill gas project ...

  • Manufactured by Doosan Fuel Cell
    based in SOUTH KOREA

    Utilizes natural gas which is supplied throughout gas pipelines. Highly available in urban areas as electricity and heat is supplied by using the current ...

  • Manufactured by OnPower, Inc
    based in USA

    Markets Served: Onshore and Offshore Applications, Gas gathering, gas lift and gas reinjection applications, Gas transmission pipelines. Design Features: Speed Reduction Gearboxes to match drive system, Light weight turbine design easy to remove and handle, Modular Construction simplifies on-site maintenance and increases on-line availability. Performance Features: Rugged Reliable Performance, ...

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you