Gas Vaporizer Equipment & Supplies In Africa
-
PremiumManufactured by P S Analytical Limitedbased in UNITED KINGDOM
The 10.045 Millennium Merlin Cold Vapor AAS System was developed to be compliant with EPA Cold Vapor methods stipulating the use of atomic absorption for the determination of mercury at low levels. The system is based on continuous flow generation (similar to the PSA 10.025 Millennium Merlin) but utilises atomic absorption as the detection method. As with all PSA Millennium Merlin systems, ...
-
PremiumManufactured by Ennox Biogas Technology GmbHbased in AUSTRIA
The gravel filter enables the coarse filtration of the biogas by passing through a gravel layer. Foreign particles, foam and condensate are removed and channelled to a drainage point. The filter can be easily accessed through a screwed cover for cleaning. Contamination can be easily removed without the need for opening the cover by rinsing with water. The gravel filter is available for various ...
-
PremiumManufactured by Acme Engineering Prod. Ltd.based in CANADA
ACME Electric Steam Superheaters are available for use with steam boilers as auxiliary pieces of equipment. Our superheaters are all custom-made and built to meet the specific design requirements of each application. A superheater increases the temperature of the steam but does not increase the latent heat of evaporation. This means that heating with superheated steam is similar to heating with ...
-
PremiumManufactured by Ennox Biogas Technology GmbHbased in AUSTRIA
Before the coarse filtered bio or sewage gas can be fed to the gas consumer it is normally passed through a ceramic fine fillter. Here the gas is passed through a ceramic or reclay unit with a pre-determined pore diameter. Fine particles < 150 – 210 μm and condensate vapour are effectively removed. This eliminates any possible damage to components further on in the gas processing ...
-
PremiumManufactured by Ennox Biogas Technology GmbHbased in AUSTRIA
Biogas, sewage gas and land fill gas contains not only water vapour, but also a whole host of additional impurities such as hydrogen sulphide, NH3 and siloxane, which, when processed in the utilization system can not only lead to a reduction in efficiency, but also result in damage of the ...
-
PremiumManufactured by Ennox Biogas Technology GmbHbased in AUSTRIA
The sediment trap removes sediment particles or condensate water which may accumulate in the gas system. The contaminated and/or saturated gas is set into a spiral motion within the container by a special inlet nozzle. The heavier particles and water collect on the side walls of the unit, where they then accumulate at the bottom of the container. Drainage can be achieved either manually or ...
-
PremiumManufactured by Acme Engineering Prod. Ltd.based in CANADA
ACME Electric Steam Superheaters are available for use with steam boilers as auxiliary pieces of equipment. Our superheaters are all custom-made and built to meet the specific design requirements of each application. A superheater increases the temperature of the steam but does not increase the latent heat of evaporation. ...
-
PremiumManufactured by AB Micatronebased in SWEDEN
The MEL-1000 is a control and control centre for electric boilers. Mel-1000 comes with test report from quality ...
-
PremiumManufactured by ERG (Air Pollution Control) Ltdbased in UNITED KINGDOM
0m diameter single stage V-tex® scrubber and skid-mounted pump, heat exchanger and instrumentation. The basic scrubber, pump, pipework and frame are shown in the photo, with fan, instrumentation and controls added to client requirements for each specific ...
-
PremiumManufactured by Bosch Industriekessel GmbH - Industrial Boilersbased in GERMANY
- For recovering heat from flash steam from thermal water treatment - Heat recovery and thus efficiency improvement - Energy produced can be used for additional heating or for transfer to a separate water circuit Highly efficient boiler systems with perfectly matched boiler house components ensure that low levels of energy consumption and emissions are ...
-
PremiumManufactured by AMETEK Spectro Scientificbased in USA
The FDM 6000 is a portable, battery operated fuel dilution meter that determines the concentration of fuel dilution present in an oil sample within a matter of minutes. The FDM 6000 uses a unique patent pending fang design to pierce the cap of a disposable sample vial and draws in the headspace from the vial. The headspace flows over a SAW (Surface Acoustic Wave) sensor which reacts specifically ...
-
Manufactured by Biogest Energie- und Wassertechnik GmbHbased in AUSTRIA
As agricultural expert with many years of experience, Biogest now also supplies energy-efficient LED lighting for farming applications. Lighting installations for agricultural facilities are regarded as one of most challenging areas in the lighting sector. This is because they not only have to be designed with power consumption and costs in mind, but also with regard to optimum light conditions ...
-
Manufactured by Hydrodrive Systems & Controls PVT Ltdbased in INDIA
A pre-engine/pre ignition device used to control the exhaust emissions through combustion kinetics change in all internal combustion engines using diesel, bio-diesel, leaded ,unleaded petrol, kerosene, gaseous fuels, including blended/emulsified fuels and also used in the gas turbines and all external combustion equipments-boilers, furnaces, room heaters ...
-
Manufactured by GP Green Energy Systems Pvt. Ltd. (GP Energy)based in INDIA
The Dual Fluidized Bed ( DFB ) Gasifier developed by Gussing Renewable GmbH (GRE) with the technology introduced by Vienna University of Technology, is considered as the most sophisticated process for the production of gas from renewable resources in the world and is state of the art. At the heart of the FICFB (Fast Internally Circulating Fluidized Bed) reactor are two interconnected fluidized ...
-
Manufactured by Guangzhou Shincci Energy Equipment Co., Ltd.based in CHINA
Applicated In:continuous evaporation concentration in industries such as milk, glucose, amino acids, starch, xylose, pharmaceuticals, chemicals, bioengineering, environmental engineering, and organic solvent recovery, making it particularly suitable for materials with thermal sensitivity, viscosity, and foaming properties. Advantages:Applied to Pharmaceutical, beverage concentration, mechanical ...
-
Manufactured by Plazarium GmbHbased in GERMANY
Low-temperature plasma. Basic concepts, properties, application. Plasma is the quasineutral gas of charged and neutral particles, the concentration of which is sufficient to ensure that the space charge created by them limits their ...
-
Manufactured by Cimarronbased in USA
The HY-BON QSG225 VRU is our standard oil flooded screw compressor package engineered for larger volume tank vapor recovery applications. Our QSG225 packages have a gas volume range starting at 70 MSCFD and maxing out at 300 MSCFD. The unit is powered by a 75 horsepower electric motor and is engineered for up to 2% H2S ...
-
Manufactured by MRW Technologies, Inc.based in USA
Designed for vapors from PRODUCED OIL OR WATER TANKS as well as PRODUCED GAS, MRW Non-Assist Smokeless Flares don't require forced air for smokeless combustion at infinite turndown. Vapors from multiple low-pressure tanks and high pressure sources can be controlled with a single open flame system. Built to meet 40 CFR 60.18 and operate with no visible emissions, MRW Smokeless Tank Battery Flares ...
-
Manufactured by Cat Pumpsbased in USA
Cat Pumps has worked closely with OEMs over the years to enhance the pumping of liquid CO2 and other high vapor liquids. Keeping high vapor liquids like CO2 stable and in liquid CO2 form is essential. Our custom triplex, plunger, reciprocating liquid CO2 pumps have proven to be very reliable. Our custom liquid CO2 pump design offers a simple and affordable solution for pumping CO2 and other high ...
-
Manufactured by Dalton Electric Heating Co., Inc.based in USA
The Diff-Therm Platen Heaters by Dalton Electric Heating Co are engineered for high-performance and durability in vacuum diffusion pump heating applications. Featuring a robust design, these heaters integrate high-purity magnesium oxide, nickel chromium resistance wire, and stainless steel components to enhance dielectric strength and optimize heat conduction. This innovative assembly is swaged ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you