Ground Flares Equipment & Supplies In Asia & Middle East

The 1″ Copper Nut is used when attaching a new 1″ copper line to be pulled in behind the 1″ Water Line Bursting Heads (such as TT-WDGE-1WED). The Copper Flaring Tool (TT-WDGE-CFT) is used to flare the new copper pipe before it is attached to the head using the 1″ Copper Nut. Be sure to put the nut on the new pipe before flaring it! The Manufacturer’s user guide is ...

The enclosed ground flare is used in applications that required a non-visible flame, where space is limited, populated areas, and increase in destruction efficiency is required. This can be accomplished by utilizing temperature control on the enclosed ground ...

Dinex designs and manufactures high quality clamps for connecting exhaust components. Our long-term experience enables us to provide custom designs tailored to suit your clamping requirements. We can offer high strength, low weight clamps for demanding applications such as those at elevated temperatures requiring gas-tight joints. Furthermore, we can give technical support in the form of product ...

High stability flame retention system allows the flare to bum during all types of weather conditions. The pipe flare is the most basic type of flare tip. It is sometimes called an “utility flare”. Pipe flares will not smoke when burning low carbon content gases. The UOP Callidus Pipe Flare (CAL-PF) incorporates key design features to help ensure a stable burning flare designed for ...

Enclosed ground flares are used to destroy waste gases without radiation effects or visible flames, and with limited noise, minimized footprint and visual impact. Fives offers a range of ITAS enclosed ground flares whose burners and stack are designed to accommodate the thermal requirements of enclosed flames. ITAS pioneering technology includes several options to allow for smokeless operations ...

Multipoint ground flares can manage big quantities of gas without visible flame; the specific design includes burners inside a fenced area to ensure that radiation and heating effects are kept inside. For particular applications, the burners can be installed into a pit without fence. From engineering, fabrication, supervision and training, ITAS multipoint ground flares fit into many ...

Our enclosed ground flare systems combust waste gases cleanly and efficiently by eliminating smoke and minimizing noise and visible flame from conventional flaring. Enclosed flares are customized to client specifications to achieve excellence in overall system performance using unique technologies such as JZHC fin plate burners and our proprietary fluidic wind fence ...

Utility Flares; Pipe Flares are unassisted equipment designed to combust hydrocarbons where non-smokeless operation is environmentally acceptable or where the waste gases produce little or no smoke due to their ...

The control panel is responsible for controlling and monitoring the flare system. The set up and operation is the same for elevated, ground or skid mounted flares. Depending on specification and scope, the control panel can take many different shapes or forms. It will typically contain indication lamps, e-stop, isolator, selector switches, relays, ignition transformer, timers and temperature ...

ICE’s flare packages provide a broad broad range of elevated and ground ares, with the most common ...

A flare tip is used for the disposal of waste combustible gases and consists basically of a high grade alloy tube. Usually it is mounted on the top of a steel stack so that the heat of combustion and its products will not cause danger to life and property on the ...

AFG Combustion’s flare pilots are suitable for use on all types of Elevated Flare Tips, Ground flares and Burn Pits, in the worst weather conditions which may exist off-shore or on-shore, from sub-zero ambient conditions of Antarctica to the sand/wind storms of Middle East and Africa. The pilots have very wide application ranging from standard LPG or natural gas to low BTU gases like bio ...

Optimization of an Elevated Staged Flare for a Large Refinery or a Gas Plant. In recent years most of the refineries, petrochemicals & gas processing plants are seen to be of larger capacities. Flare system for such plant are required to operate at two extreme flow conditions, one very high flow rates (in excess of 1000 tons per hour or the maximum design capacity rate) as well as at minimum ...

Temperature controlled ground flares allow for operation between 800 and 950° C (max 1100 °C) guaranteeing maximum methane oxidation. Besides keeping the flaring temperature within the required range, applied insulation is also an excellent noise muffler. In addition to basic components such as self-supporting flare stack, instrumentation, and control panel, according to our standards, ...

Sometimes referred to as steam assisted pipe flares, upper steam flares have a steam manifold near the top of the flare tip. The manifold distributes steam to nozzles surrounding the outside diameter of the flare tip, just above the flare tip exit. Steam injected into the combustion zone pulls air in along with it. This additional combustion air increases the amount of waste that can be burned ...

Our Peacock Oil Burners are designed to flare liquid hydrocarbons without liquid fallout or soot formation. These burners provide excellent service for well testing operations. When only oil is flared, a high-pressure air or gas source is required to provide additional mechanical atomization to ensure the mixture is a fine mist when it exits the burner nozzle which is designed to accept separate ...

SIES Enclosed FLare are versatile in design and suitable for total destruction of waste gas/vapors. These Systems are designed to meet local environmental norms and can also be customized as per CDM regulations. Our Enclosed Flare/Thermal oxidizers system incorporates the latest technology and features for your flaring needs to ensure optimal performance and quiet operation. SIES offers ...

Our elevated flare range of open flare stacks provides a good degree of control over the combustion process in an elevated flame burner, whilst remaining highly flexible and portable. They are ideal for temporary or emergency mobile systems on landfill sites, or can be used at sewerage treatment works and other anaerobic ...

The high temperature burner is used for achieving a higher level of flame control and temperature. The flame is much shorter on this type of burner sitting just above the air ports. With this type of burner a temperature of 950 -1000°C can be expected without automatic air control. High temperature burners are generally becoming more widespread and are made of 304 stainless ...

Utility Flares (Pipe Flares) are the most basic flare design available, to provide a robust, reliable and flexible solution for the flaring of large volumes of low pressure waste gas when smokeless operation is either not required or can be achieved without an assisting medium (like steam, air or gas). Reliable operation at both full load and partial load is ...