Ground Flares Equipment Supplied In USA

The 1″ Copper Nut is used when attaching a new 1″ copper line to be pulled in behind the 1″ Water Line Bursting Heads (such as TT-WDGE-1WED). The Copper Flaring Tool (TT-WDGE-CFT) is used to flare the new copper pipe before it is attached to the head using the 1″ Copper Nut. Be sure to put the nut on the new pipe before flaring it! The Manufacturer’s user guide is ...

Advanced Energy's E2T Quasar M8100 series instruments provide continuous monitoring and detection of flare stack pilot (PM), smoke (SM), and flares (FM). Flame detection up to 400 m away. Detection of hydrocarbon and hydrogen flames. CSA/US and ATEX explosion-proof housing. Automatic gain control for adverse weather conditions. Modular opto-electronic package for easy removal from ...

In applications where there are no immediate safety concerns regarding the combustion of waste gas, but there is still a desire to hide visible flame and reduce odour concerns, Tornado can offer an enclosed ground ...

The Pit Flare (or “Burn Pit”) is usually constructed of an excavation lined with a non-combustible lining of rock or refractory material. Often coupled with a pit liner, our pit flares can be a cost-effective combustion option for an environmentally conscious user. Our high efficiency burner produces a mixture of vapor and liquid from a single source. While most often designed to ...

Utility flares (DU series) are one of the most common flare designs use for applications with no smokeless burning requirements. They are also utilized in applications where smokeless flaring can be achieved without the use of an additional assist ...

The dynamic (velocity) seal is a simple innovation which ensures significant cost savings over time. The reverse conical baffle design reduces flow area in the flare tip while simultaneously increasing purge gas velocity. In combination with the dynamic seal, a constant flow of purge gas will maintain a seal in flare system, ensuring that air infiltration does not occur. A vortex effect is ...

Multipoint ground flares are 100% smokeless flare systems that break up the gas loading into separate stages and burners. As pressure in the flare header increases and decreases, a PLC opens and closes valves to bring stages online or take them off. A proper velocity is maintained to sufficiently pull air into the combustion zone and burn 100% smokeless. If the first stage is open to the process, ...

We design Enclosed ground flares when waste gases are requested to be flared in an enclosed stack, with reduced flame visibility, minimal heat and noise, emissions sampling, ease, and smokeless combustion, in sensitive areas. The stack is internally refractory lined, designed for low and medium flows, has high destruction efficiencies relative to an open flare and designed as natural draft or ...

Flame Front Generators are a traditional method of lighting flare pilots. An FFG panel mixes plant air and fuel gas into an ignition chamber. A spark plug ignites the mixture. The 'flame front' travels through a 1' pipe to flare ...

The Demountable flare system provides flexible flaring operations to so that you can place multiple risers on a single support structure. They also allow you to perform maintenance to the tip at grade with minimal use of personnel at elevation. The demountable flare system features a derrick with the riser or risers mounted in such a way to permit lowering the flare tip to grade for service ...

The LRGO multi-point ground flare (MPGF) has become the design of choice for operators who desire a flare system that can provide high smokeless capacities and combustion efficiency in a flare design that minimizes visual impact to the surrounding community. The LRGO flare is designed with staging and ignition systems to ensure safe, short, smokeless flames are maintained over the full operating ...

Staged ground flares are utilized for smokeless combustion of large volumes of waste gas flow with high turndown. They are commonly used in LNG and gas processing facilities. Due to the nature of these applications, staged ground flares are designed to handle streams over a wide pressure range and variety of ...

Our Titan Demountable Flares, also named demountable derricks, are derrick-supported flares with three, or four leg configurations and overall heights of up to 200 meters. Designed to accommodate several risers/tips on the same derrick structure. Each flare tip has its own set of pilots. The demountable system allows maintenance at grade on each flare tip while keeping the other flare systems in ...

To dispose of heavy waste gases, which have a greater tendency to smoke, in a smokeless manner, we provide three different design options, depending on customer requirements. Air Assisted Flares, which utilize forced air from blower(s) to provide assist air for combustion and promotes additional air entrain from the ambient due to the relatively high exit speed of the streams. Steam Assisted ...

The Ghost series of enclosed biogas flares is a simple and cost effective combustion solution for a variety of applications where a hidden flame is required. The superior design, high quality stainless steel construction and unmatched versatility make the Ghost Series Enclosed Flares an exceptional choice for emissions control within the biogas and wastewater industries. Additionally, each ...

Baker Furnace is a leading-edge manufacturer of Enclosed Ground Flare systems (also described in the industry as Methane Combustors, Vapor Combustors, or Thermal Oxidizers) for oil field methane ...

The enclosed ground flare is used in applications that required a non-visible flame, where space is limited, populated areas, and increase in destruction efficiency is required. This can be accomplished by utilizing temperature control on the enclosed ground ...

Dinex designs and manufactures high quality clamps for connecting exhaust components. Our long-term experience enables us to provide custom designs tailored to suit your clamping requirements. We can offer high strength, low weight clamps for demanding applications such as those at elevated temperatures requiring gas-tight joints. Furthermore, we can give technical support in the form of product ...

High stability flame retention system allows the flare to bum during all types of weather conditions. The pipe flare is the most basic type of flare tip. It is sometimes called an “utility flare”. Pipe flares will not smoke when burning low carbon content gases. The UOP Callidus Pipe Flare (CAL-PF) incorporates key design features to help ensure a stable burning flare designed for ...

Enclosed ground flares are used to destroy waste gases without radiation effects or visible flames, and with limited noise, minimized footprint and visual impact. Fives offers a range of ITAS enclosed ground flares whose burners and stack are designed to accommodate the thermal requirements of enclosed flames. ITAS pioneering technology includes several options to allow for smokeless operations ...