Heat Engine Power Equipment & Supplies In Asia & Middle East

The use of biogas as an energy source will considerably help achieve the environmental objectives set nationally and internationally; be that reducing reliance on nuclear energy or the reduction of CO2 emissions. Specially designed for the biogas market, AERZEN biogas blowers of series GM ensure ultimate reliability and ...

The Turbophase system is an innovative air injection technology designed to enhance the performance and efficiency of combustion turbines. It addresses the common issue of reduced turbine output due to ambient temperature fluctuations by injecting hot, high-pressure air directly into the compressor. This process increases mass flow and consequently improves output by 10-20%. The system is modular ...

Selnikel provides complete design, manufacturing, erection and commissioning services for the water tube and smoke tube type waste heat recovery boilers. Waste heat boilers can be designed with single or double pass. HRSG (Heat Recovery Steam Generation) systems are installed behind gas turbines and furnaces. Selnikel waste heat boiler system is an optimal solution for plants aiming to decrease ...

Exhaust gas heat exchangers (EGHE) utilise waste heat from the exhaust of the GE's Jenbacher gas engine cogeneration plant. They are typically located adjacent to the engine or are mounted on the roof of a containerised combined heat and power unit. They are present in a wide range of different applications and along with the other systems can be used to achieve overall system efficiencies of ...

In those areas not serviced by a main electricity grid, locally generated electricity is ideally suited as a cost-effective way of meeting the local electricity demand while reducing significant network installation or upgrade costs. Through supply of energy directly at the load with a captive power plant, it is also possible to reduce or avoid altogether the transport and distribution losses. ...

A millennia-old method of pumping river water or sewage has conquered the world of hydro power generation. The "Archimedean screw" - also known as the "water screw" - is thousands of years old. It is used to pump large volumes of water at relatively low heads and is extremely reliable and durable so application operators are fully satisfied. Systematic consideration of how to utilize all the ...

The Glycol HQat TracQ (GHT) feature allows for th9 waste heat from the Stirling engine and it's exhaust to be used by the customer. A plate heat exchanger is used to separate the engine coolant and the GHT media. The GHT media is circulated using a rotary vane pump on a variable speed motor. The PowerGen monitors the supply and return temperatures of the GHT media and adjusts the units operation ...

Steam boilers, hot water boilers and superheated water boilers: Steam Shell boilers from 250 to 50.000 kg/h. Design pressure PS up to 25 bar. Saturated steam or superheated steam. Hot water boiler from 60.000 to 20.000.000 kcal/h and superheated water to 190ºC. Sprint steam generators (water-tube) from 300 to 2.000 ...

Contec's Recovered Tire Pyrolysis Oil, known as ConPyro®, is a high-quality, eco-friendly product derived from the pyrolysis of end-of-life tires (ELTs). Unlike traditional crude oil, this thick, dark liquid contains over 50 percent aromatic hydrocarbons, a significant portion of which are bio-based due to the natural rubber content in tires. The pyrolysis process involves heating rubber ...

We offer our Bert Franchise Partner various standardized tank sizes from 200-1.500 m³ with special Bert technology. Starting from 9 tons/ day conventional tanks can be more attractive than Bert Mobil solutions. In Germany many 300 m³ tanks have been build for farmers with 150-400 cattle. Other countries have built larger tanks. Bert kw/h output can be adjusted to the customers needs. ...

Two-stage direct-fired absorption chiller/heater SYDFA BYZ.Economically providing efficient chilled water for air conditioning, hot water for heating and sanitary hot water (simultaneous or ...

Eavor’s closed-loop geothermal technology consists of several Patent Pending innovations. The Eavor-Loop is a closed-loop geothermal system within which a proprietary working fluid is contained and circulated. The working fluid is not fluid from a reservoir flowing into our wells, it is a fluid added to the closed-loop Eavor-Loop™ to create an efficient radiator, much like a ...

Absorption chillers can be used to deliver a trigeneration solution for a combined heat and power plant. Absorption chillers produce chilled water by heating two different substances that are in thermal equilibrium to separation, then reuniting them through heat removal. An example of two substances that may be used for this process is water and lithium bromide. Absorption chillers can be ...

Entropea’s engineering team develops the architecture of the power systems to condition the electrical power output to match final utilization. A close collaboration between the departments results in optimum dedicated embedded control systems for the thermodynamic Rankine cycle. High frequency inverters are used for high efficiency energy conversion and industry standard PLCs offer high ...

The SWG-100 Compact is a cost effective stationary biogas analyzer designed for discontinuous measurement. It has user programmable settings for up to 24 measurements per 24 hours. It is typically used in the harsh industrial environments of combined heat and power (CHP) engine gas monitoring. -Plug & play, pre-calibrated sensors -Safety in use with gas flow restrictor orifice at gas inlet and ...

Creating a Sustainable Future With Waste Heat Recovery. Convert Waste Heat Into Clean, Carbon-Free Electricity With Climeon HeatPower ...

Approximately 25% of the usable energy of the fuel gas is released in the exhaust of the gas engine. This can be captured for cogeneration in a combined heat and power plant. This heat exits the engine at ~450oC as ‘high grade heat’, contrasting to ‘low-grade heat’ available from the generator cooling circuits. This high temperature and flow makes it well suited for ...

Intertech is an expert in manufacturing Bio Gas Installations. A Bio Gas Installation converts manure, corn and other organic waste into power. We produce for agricultural as well as industrial ...

Associated petroleum gas (APG) is also known as flare gas. APG can be converted to power at high efficiency utilising GE Energy’s Jenbacher gas engine. This power can be used for the provision of electricity and heating on-site whilst eliminating the cost of diesel deliveries to remote areas. The utilisation of APG as a fuel for a generator is an excellent way of reducing carbon dioxide ...

Generate electricity and heat via a combined heat and power gas engine. Biogas is formed by the anaerobic decomposition of putrescible organic material. Biogas can either be used to generate electricity and heat via a combined heat and power gas engine, or can be cleaned to produce pure biomethane via biogas upgrading. Clarke Energy is a distributor of Jenbacher gas engines which are designed for ...