Heating And Cooling Downloads

This device is for the cleaning of gases and is suitable for use in conjunction with all gas measuring and analysis instruments. It is encased in a handy portable case. It is especially designed for use with the IMR 1400 IMR 2000 and IMR 2800 series gas analyzer. The dust free gas is led directly to the IMR 500 P via heated tube without being cooled. Leading the gas through a tube, the outside of ...

By IMR Environmental Equipment, Inc.

The IMR 550p device is for the cleaning of gases and is suitable for use in conjunction with all gas measuring and analysis instruments. It is encased in a handy portable case. It is especially designed for use with the IMR 1400 and IMR 2800 series or any other type of combustion gas analyzer. The dust free gas is led directly to the IMR550P via heated tube without being cooled. Leading the gas ...

By IMR Environmental Equipment, Inc.

The CO2-EN Gas Detection Carbon Dioxide Monitor Controller is designed to provide HVAC systems with economical means of controlling outdoor makeup air to maintain indoor air quality and reduce the cost of heating or cooling the building environment. The CO2-EN is used for ambient monitoring in commercial and light industrial environments. Air samples originate at the remote sampling head, which ...

By Acme Engineering Prod. Ltd.

It is especially recommended for pressurized air or water conduction at high temperatures, it can be used in vehicles and in the industrial sector. For use in cooling and heating systems in buses, coaches, trucks, industrial vehicles, cooling systems in cogeneration units and marine engines, and transport of high temperature fluids in general industry. It is recommended for the use in straight ...

By Venair

DAB A, B and D wet rotor circulators are designed for the circulation of water in civil and commercial heating and conditioning systems. Cast iron pump body and die-cast aluminum motor body. Techno polymer impeller. Series A with threaded inlet and outlet, series B with flanged inlet and outlet, twin series D with flanged inlet and outlet. Two-pole asynchronous motor with three speeds in the ...

By Dab Pumps S.p.A.

VS by DAB is a wet rotor circulator with bronze pump body designed for the circulation of drinkable hot water in domestic and residential systems. The motor shaft can be deblock manually. VS has a vent plug, an asynchronous motor with overload protection and threaded suction and delivery ports. ...

By Dab Pumps S.p.A.

Evosta 2 San V and Evosta 2 San R by DAB are wet rotor circulators designed for the circulation of drinkable hot water in small domestic and residential systems. Synchronous motor. Threaded suction and delivery ports. Brass pump body. In the Evosta 2 San V there are incorporated non-return valve and shut-off ball valve, external threaded inlet and outlet; in the Evosta 2 San R there are internal ...

By Dab Pumps S.p.A.

Metering of heat and/or cooling consumption in building management. Energy measurement for local or remote reading. Application for bulk measuring points. Connections to management systems. ...

By GWF AG

Metering of heat and/or cooling consumption in building management. Energy measurement for local or remote reading. Application for large measuring points. ...

By GWF AG

Mokon’s HTF 500 Series heat transfer fluid system maximizes performance with temperatures from 125°F to 500°F (52°C to 260°C). The HTF 500 Series features Mokon’s unique heating philosophy and cool oil reservoir design, offering the safest and most efficient means of cooling ...

By Mokon

Heat calculator: Heating and cooling calculation. Energy calculator for universal use in systems for heating and cooling measuring. 10 years battery lifetime. Individual remote reading (AMR) with add on modules Plug & Play. Optional pulse, radio frequency and MBUS output. Passive analogue outputs for 4 ... 20 mA. ...

By Teksan

The CM 3300 Series furnaces are built for the industrial environment with rugged floor mount designs and heavy-duty construction. Both front loading and bottom loading configurations are offered. These furnaces utilize alumina brick and fiber insulation. Designed for strength and energy efficiency. molydisilicide heating elements provide rapid heat and cooling rates. The furnace is designed to ...

By CM Furnaces Inc.

Chroma ATE launches the 8610 Battery Pack Power HIL Testbed for testing battery systems and components of new energy vehicles, incl. the battery module, battery management system, and cooling/heating system. Various hardware options are available for integration, such as a DC power supply, battery charge/ discharge system, digital meter, Hi-Pot tester, and short-circuit and overvoltage protection ...

By Chroma ATE Europe B.V.

American Wheatley offers Shell and Tube Heat Exchangers available in sizes 4” through 30” constructed in accordance with ASME Section VIII. Heat exchangers are needed to transfer heat between two or more liquids and prevent them from mixing, and are used for both heating and cooling. We provide our customers with the highest quality heat exchangers, which contributes to the longevity ...

By American Wheatley

Capital builds replacement tube bundles for water/water exchangers and steam/water exchangers. We can duplicate the bundle diameter, length, tubesheet, and bolt hole pattern. You slide the old bundle out and slide the new bundle in without a lot of extra work on the jobsite. Special materials are available for high pressure steam, boiler water, or high temperature hot water. Capital Coil & ...

By Capital Coil & Air

By Electro Industries

The reversible heat pumps of the HARIES TECH series, with environmentally friendly R410A refrigerant, represent the best solution for centralised hydronic air conditioning for medium areas (such as hospitals, offices, shopping centres, etc.) and offer energy savings in all operating conditions. The technical solutions adopted contribute practically to the reduction of operating costs of the ...

By MTA spa

Active chilled beam with two-way air discharge, 300 mm nominal width, vertical heat exchanger and condensate drip tray. Active chilled beam for heating and cooling, with 2-pipe or 4-pipe heat exchanger, for integration with various ceiling systems. The condensate drip tray is useful if the temperature temporarily falls below the dew point. ...

By TROX GmbH

AICs standard line of E-Line economizers is the optimal solution for boiler flue gas heat recovery. Covering a wide range of boiler sizes, the E-Line delivers real energy and cost savings for commercial and industrial installations. In principle the E-Line economizers act as air to water heat exchangers. Flue gas, typically considered wasted heat, can be effectively cooled down and condensed ...

By AIC Inc.

Dalrada's industrial heat pumps provide simultaneous heating and cooling without combustion and can replace water heaters, steam boilers, chillers and cooling towers. This revolutionary technology uses a non-toxic, non-flammable, environmentally friendly natural refrigerant that’s completely CFC and HFC-free. ...

By Dalrada Climate Technology (DCT), a subsidiary of Dalrada (DFCO)