Nuclear Energy Equipment Supplied In USA

If you need to count on your backup power supply, you better be testing your fuel and polishing it on a regular basis. Never assume the fuel is good to go and then find out in an emergency that the fuel has a problem. From 400 gallons per hour to over 1200 gallons per hour of portable fuel ...

W-5 Test Kit: Test For Water in the Diesel Fuel Will work for clear and with red dyed ...

The biogas compressor series VMY is an oil-injected screw compressor in 3 sizes for volume flows. It is suitable for boosting the intake pressure of treatment plants for biogas (BGTP) or as an essential part of biogas injection plants (BGIP) for the compression of biomethane to inject into gas grids. ...

A modular tank cleaning and fuel polishing system designed for the transfer and/or re-circulating of diesel fuel in storage tanks, boats, generators and trucks. The system utilizes a 115 volt, 30 gallon per minute continuous duty pump delivering over 1,200 gallons per hour in conjunction with a Dieselcraft Model 200-900 magnetic fuel conditioner to reduce bacterial growth, a 8×32 ...

The use of biogas as an energy source will considerably help achieve the environmental objectives set nationally and internationally; be that reducing reliance on nuclear energy or the reduction of CO2 emissions. Specially designed for the biogas market, AERZEN biogas blowers of series GM ensure ultimate reliability and ...

The Biogas compressor series C is an oilfree screw compressor in 3 sizes for volume flows up to 1900 m³/h and 3,5 bar overpressure. It is suitable for boosting the intake pressure of treatment plants for biogas (BGTP) or as an essential part of biogas injection plants ...

AERZEN screw compressor packages are characterised by a great variety of types and a lot of modification possibilities. Whether these compressors serve as part of the customer's plant concept or they are applied as complete system solution, AERZEN always adapts to individual customer requirements. Forming the basis for this is the development competence of this world market ...

Advance Thermal Corp. has been working with the Nuclear Power industry for over 30 years. In fact, we service the largest Nuclear Power producers in the USA and Canada. Our two plants strategically located around the country allow Advance Thermal Corp. to participate in multiple Nuclear Plant refueling outages simultaneously. We provide custom-measured, quality manufactured removable insulation ...

Dysprosium Oxide (Dy2O3), also known as Dysprosium (III) oxide, is a white powder suitable for ceramics, glass, phosphors, lasers, and metal halide lamp applications. Stanford Materials Corporation (SMC) provides the highest quality dysprosium oxide (dysprosia). Our ultra-high purity dysprosium oxide can be up to 99.999%. Custom size is ...

The DRS Consolidated Controls Voltage Regulator and Speed Controller are designed for Class 1E (including Class 1E seismic requirements) safety related nuclear applications. The speed of large diesel engines must be kept within an ideal engine-specific range. Both excessive speeds and speeds which are too low must be measured and controlled reliably. The generator voltage must also be measured ...

The ASCO 2705 Load Bank is a portable, self-contained AC resistive model designed for indoor use at 100 kW. The 2705 features the SIGMA LT control platform, which allows networking of multiple load ...

Ocean Thermal Energy Conversion (OTEC) is a game-changing technology that leverages the temperature differences in the ocean between cold deep water and warm surface water found in the tropics and sub-tropics, to generate unlimited energy without the use of fossil fuels. It boasts a competitive advantage over alternative sources of electricity production with respect to accessibility, ...

NFT specializes in drum vents for hydrogen mitigation in nuclear material and waste containers. Our filter vents are specific to a variety of customers and project needs. Whether a client needs a typical threaded configuration for a 55-gallon drum or a fully integrated filter welded into a container lid, our engineers work closely with each customer to fully customize the filter vent best-suited ...

The MOGAS T-Series trunnion-mounted ball valve is available in either metal-seated and soft-seated from 3 to 60 inch, and two- or three-piece designs, with operating temperature from -50° F to 400° F (-45 to 204° C). The valve retains many of the time-tested features of the C-Series, such as an actuator mounting pad, but with a trunnion design. Its reduced operating torque results in ...

Simply Smarter and Built to Last! Accel CS’s Superior Boiler Design Makes it the World’s Most Durable, Reliable, and Efficient Condensing Boiler. Lower Your Fuel Bills While Enjoying Nearly Endless Hot Water: Accel CS is one system for both heat and hot water. Combining several Energy Kinetics’ developed breakthrough technologies, including Hybrid Energy Recovery®, ...

As well as being integral to AREVA's operations, nuclear reactors are also central to the Nuclear Measurement business unit. The business unit offers solutions to meet all power plant ...

Iodine Absorption in Nuclear Power Plants - For the removal of radioactive iodine in nuclear power plants and reprocessing plants there is a series of adsorber systems available, proven over decades. These are based on silver or potassium iodide, supported by acid resistant carriers. Products include: AC 6120 and ...

GeoSIG's SMS/SAS systems are mostly used in Nuclear Power Plant or other Industrial Facility Seismic Monitoring Projects. If you need any further specific information, please do not hesitate to contact us through our agent assigned for this kind of instrumentation for your geographical region or ...

The FPS DX-S is a programmable, fully automated, fuel maintenance system that removes water, sludge, and other contaminants from fuel storage tanks through routine filtration. The system’s compact design allows for tight indoor installations such as inside gen-set enclosures or engine rooms. With a 1.3 GPM flow rate, the FPS DX-S can polish up to 640 gallons (2,423 liters) of fuel in a ...

The FPS Compact is a programmable, fully automated, fuel maintenance system that removes water, sludge, and other contaminants from fuel storage tanks through routine filtration. The system’s compact design allows for tight indoor installations such as inside gen-set enclosures or engine rooms. With a 1.3 GPM flow rate, the FPS Compact can polish up to 640 gallons (2,423 liters) of fuel in ...