Energy Management Equipment & Supplies In Oman

The KOLLER 2-Split Offshore Wireline Unit has been designed for measurements, slickline and e-line activities with wire capacities above 7,650 m / 25,000 ft. It is suitable for both offshore and onshore applications. The 131 HP guarantees maximum pull force and speed at any depth, even with heavy tools. One of the new features of the power pack is a maintenance free flame trap together with a ...

A versatile power-to-heat solution from Bosch for local and district heating, building heating, process heat or as redundancy for other energy generators. - Generating heat 100 % electrically – without any flue gas - Reducing CO2 emissions: Using surplus power from photovoltaics, hydropower and wind power - Electric heat system from a single source and simple system integration - Fast ...

The ALV10 is an air-fuel ratio controller designed to improve combustion efficiency and reduce emissions in industrial engines. It utilizes a precise control algorithm to adjust the air-fuel ratio in real-time, ensuring optimal combustion under all operating conditions. The ALV10 can be easily integrated with existing engine control systems and features a user-friendly interface for easy ...

A scroll compressor uses two interleaving scrolls to compress air. Devices using this technology are known for operating more smoothly, quietly, and reliably than conventional piston compressors. Unlike pistons, the orbiting scroll’s mass can be perfectly counterbalanced, with simple masses, to minimize vibration. The scroll’s gas processes are also more stable and continuous. ...

SpiraBar enables thermal performance equal to, or better than, any splash bar on the market by providing the most uniform droplet distribution of any splash bar design. More uniform distribution of water and air allows the bars to be installed without a staggered configuration, which older bars required due to water shedding. When paired with Brentwood's SpeedGrid system, SpiraBar installs 50% ...

A Steam Tube Rotary Dryer is a type of industrial drying equipment used in various processes to reduce the moisture content of materials. It is particularly useful for handling bulk solid materials that require uniform drying over a large volume. Steam tube rotary dryers are used in a variety of industries including agriculture (drying grains), mining (drying ores), and chemical processing ...

The MCM-U08AII-BI module is ideal for measuring bipolar voltages in test systems and test systems. Use the module to monitor the voltage of the fuel cell, battery stacks, lithium-based batteries and electrolyzers. It is optimally equipped for use in harsh environments. Application areas include starter test benches, engine test benches, generators test stands, HIL systems and test benches for ...

Direct fired rotary kiln incineration technology has been proven to be the best available high temperature thermal treatment technique for small and medium scale hazardous waste disposal ...

The i8-75G General Incinerator is one of the most popular models in our medium capacity range due to its simple, effective use as a multi-purpose incinerator with suitability for disposing of general solid waste and medical waste. Using the same technology and design as the i8-55G, the i8-75G increases the capacity of the primary chamber capacity allowing for greater burn rates and the capability ...

The i8-700A has the second highest capacity in our range of animal incinerators and is suitable for disposing of horses, cattle and other large animals benefiting from a wide opening door and high hourly burn rates. The second biggest model in our agricultural range is the i8-700A. The machine was designed to out perform any other incinerator within its class. It is an ideal disposal solution for ...

The HT150EV power unit is driven by a 150HP 460 V, 3Ø, TEFC electric motor for use where electric power is available. It is designed to drive several of our pumps or other hydraulic equipment and tools. Several control options are ...

The Continental Controls Corporation's VI200 is a versatile, microprocessor-based air-fuel ratio controller that can be used in a variety of combustion systems. It is designed to provide precise and accurate control of the air-fuel ratio, which can help improve fuel efficiency, reduce emissions, and extend equipment life. The VI200 is compatible with a wide range of sensors and actuators, and ...

Cell scanning: Double Cell DC (2C). Contact design: 0.5 mm spring wire with S-shape. Contact bearing: In PCB one side with redundant contact pin. Interlocking type: Friction lock in pinhole, additional hold-down possible. Contact pitch min.: 2.030 mm. Pinhole/ Geometry: Pin shape punched in bipolar plate foil. Bipolar plate material: Metal. Connection type: Flexcard. Benefit (USP): Design for ...

0m diameter single stage V-tex® scrubber and skid-mounted pump, heat exchanger and instrumentation. The basic scrubber, pump, pipework and frame are shown in the photo, with fan, instrumentation and controls added to client requirements for each specific ...

Decades of expertise in portable octane, cetane and bio-fuel with lab-accurate analysis. 45 State Agencies have used Zeltex portable fuel octane analyzers over the years, making the ZX-101 series the gold standard in portable fuel testing. The main way that fuel is analyzed is through a CFR engine, which takes time, costs a lot of money, and destroys the sample. Our portable fuel octane analyzers ...

- Three-pass boiler for a small to medium steam demand of 200 to 2,000 kg/h at up to 16 bar - Lower space requirement for easy installation - High level of efficiency due to the integrated economizer - Versatile design for use with different fuel types and as a multi-fuel firing unit - Intuitive touchscreen operation and PLC control - Easy wiring on site thanks to plug-in ...

Modernisation pays off: The average service life of industrial boiler systems is between 20 and 40 years. Many measures which previously were not possible or financially justifiable pay off nowadays after a very short period of time. Five good reasons to modernise your energy generating system: - Energy efficiency: Reduce operating costs and increase competitiveness - Supply reliability: Ensure ...

Low nitrogen oxide combustion technology is to improve the combustion equipment or control the combustion conditions, using a variety of combustion means in the furnace to control the production of NOx in the combustion process, in order to reduce the NOx in the tail gas of the combustion ...

These tanks offer sufficient volume to safely store or withdraw even large gas quantities. The digital integrated weighing scales allow to determine the filling weight with an accuracy of up to ±500 ...

The Midori fiber-optic LED light source series combines state-of-the-art, solid-state illumination technology with Ushio’s distinctive optical design to create a compact and lightweight fiber-optic lightbox with very high output efficacy that is ideal for industrial applications where space is a premium. This mercury-free, long-life ULB-35 LED light source has instant-on and extended ...