Energy Management Equipment Supplied In Ecuador

BSG 12, 32, 42 and BSG 20 Ex - for DataPro, SonicPro, EnerPro and IsoPro surge ...

LYSOTHERM is a unique THP technology that uses tubular heat exchangers and thermal oil, instead of steam or chemicals for the hydrolysis process. ELIQUO designs and manufactures LYSOTHERM in ...

One of the most efficient systems for the biological removal of sulphides from biogas is the BIDOX (BIological Desulphurization by OXidation). No chemicals are needed to operate the BIDOX system. The installation requires limited maintenance, is equipped with little process control and manages to reduce the amount of H2S in biogas to levels below 50 ppm. These features have a significant positive ...

The BTU meter RH33 is used in applications with liquid energy carriers. It calculates the thermal energy of water acc. to EN1434, glycol/water mixtures or other fluids such as thermal oils. Temperature sensor matching using calibrated temperature sensors is done in the device. Potential for cost savings can be shown by using the software available as an accessory. The device has a custody ...

Power supply for two 2 wire sensors or transmitters. The power supply has two galvanically isolated outputs for supplying voltage to sensors and transmitters. A built-in communication resistance enables bidirectional HART® communication with SMART sensors and ...

Power supply for one 4 wire sensor or transmitter. The power supply has one output for supplying voltage to 4 wire sensors and transmitters. Connection to mono-phased a.c. networks or to two phase conductors of three-phase supply networks (TN-, TT- or IT-networks as per VDE 0100 T 300/IEC 364-3) with 100-240 V AC nominal voltage ...

Universal flow and energy computer for gases, liquids and steam. The flow and energy manager RMC621 calculates standard volume as well as mass and energy flows of natural and technical gases, fluids and steam from flow, pressure, temperature and density. Depending on the medium calculation of the energy values occurs according to international standards (IAPWSIF97, SGERG88), real gas equations ...

Paperless recording, visualization and monitoring of the process values at the same time. Safe and complete recording and visualization of all process sequences. The Memograph M RSG40 has a wide range of functionality, modular construction and a intuitive operator concept. With its brilliant 7” TFT display it is possible to display process values e.g. as curves, as a circular chart display ...

The SpectrOil M/F-W has become the standard instrument when on-site and immediate fuel analysis is a necessity. It fulfills the requirements of ASTM D 6728, Standard Test Method for Determination of Contaminants in Gas Turbine and Diesel Engine Fuel by Rotating Disc Electrode Atomic Emission ...

DataPro, SonicPro and EnerPro surge arrestors – highly stressable and particularly adjusted to sensors and transmitters. Maximum operational safety at small ...

The FDM 6000 is a portable, battery operated fuel dilution meter that determines the concentration of fuel dilution present in an oil sample within a matter of minutes. The FDM 6000 uses a unique patent pending fang design to pierce the cap of a disposable sample vial and draws in the headspace from the vial. The headspace flows over a SAW (Surface Acoustic Wave) sensor which reacts specifically ...

Biogas emissions provide a valuable potential source of recoverable energy. However the presence of hydrogen sulfide (H2S) in biogas can restrict its use as it will adversely impact downstream equipment and cause SOx emissions in thermal combustion of the gas. In addition, the presence of H2S can lead to issues with health and safety as well as cause a potential off-site nuisance condition for ...

The HY-BON QSG225 VRU is our standard oil flooded screw compressor package engineered for larger volume tank vapor recovery applications. Our QSG225 packages have a gas volume range starting at 70 MSCFD and maxing out at 300 MSCFD. The unit is powered by a 75 horsepower electric motor and is engineered for up to 2% H2S ...

The Dewesoft solution can measure all the power quality parameters according to IEC 61000-4-30 Class A. In comparison to other power quality analyzers it’s possible to do more detailed analysis (e.g. raw data storing, behavior at faults, calculation of additional parameters ...

An Economical Way To See What's Happening Inside Your Tanks. Problems inside a UST like corrosion, cracking, blistering, de-lamination - issues that compromise your fuel and could lead to catastrophic consequences to your site - are notoriously hard to pinpoint. Getting a good clear look at what's happening inside the tank is difficult and expensive. The TankCam Inspection from Tanknology is the ...

The HT high temperature ovens are manufactured in 4 standard chamber sizes with maximum operating temperatures of 400°C, 500°C and 600°C.Their robust construction incorporates heavy duty hinges, door catches and shelving systems. This range also provides a foundation upon which a wide range of custom modifications can be added. Typical examples of which are the more sophisticated ...

PolyScience offers almost 50 different solutions for your laboratory's liquid heating needs - from a simple immersion circulator to economical open bath systems to full-featured circulating baths with ramp and soak capability. Typical applications include warming of reagents and culture media, thawing or tempering samples, biological incubation, cell culture, enzyme assays or controlling the ...

The Pit Flare (or “Burn Pit”) is usually constructed of an excavation lined with a non-combustible lining of rock or refractory material. Often coupled with a pit liner, our pit flares can be a cost-effective combustion option for an environmentally conscious user. Our high efficiency burner produces a mixture of vapor and liquid from a single source. While most often designed to ...

Utility flares (DU series) are one of the most common flare designs use for applications with no smokeless burning requirements. They are also utilized in applications where smokeless flaring can be achieved without the use of an additional assist ...

Flame front generators are effective, time proven ignition systems which have been widely used in flaring applications for decades. The inherent reliability, rugged construction, ease of operation, and its economic advantages have allowed the flame front generator (FFG) to remain one of the most popular forms of pilot ignition in the industry. The FFG is easily adaptable to any pilot system which ...