Energy Management Equipment Supplied In Tanzania

A fuel gas dehumidifier or gas drier is an ancillary system to a gas engine that is used to remove moisture from the fuel gas for the cogeneration system (dessication). The removal of water from the fuel gas helps to optimise the combustion process in the engine, prevents condensation and helps protect the engine from the ...

Through on-going investment in research and development GE's gas engines remain market leaders in the gas engine field. The engines are highly efficient at the conversion of the energy within gas into useful electrical power. In the event that there is a local use for heat, the alternative combined heat and power configuration may be a more useful engine ...

A captive power plant is a facility that is dedicated to providing a localised source of power to an energy user. These are typically industrial facilities or large offices. The plants may operate in grid parallel mode with the ability to export surplus power to the local electricity distribution network. Alternatively they may have the ability to operate in island mode; i.e. independently of the ...

Abandoned mine methane (AMM) can be recovered from disused coal mines. Abandoned mine methane (AMM) projects produce energy (thermal and electrical) with the added bonus of reducing atmospheric emissions of methane. Methane is a potent greenhouse gas and huge amounts of methane will escape from the mine for years to come following closure. Sealed abandoned mines offer an excellent opportunity for ...

Syngas, also known as synthesis gas, synthetic gas or producer gas, can be produced from a variety of different materials that contain carbon. These can include biomass (wood gas), plastics, coal, municipal waste or similar materials. Historically town gas was used to provide a gas supply to many residences in Europe and other industrialised countries in the 20th Century. Gas engines utilising ...

Cogeneration (cogen) through combined heat and power (CHP) is the simultaneous production of electricity with the recovery and utilisation heat. Cogeneration is a highly efficient form of energy conversion and it can achieve primary energy savings of approximately 40% by compared to the separate purchase of electricity from the national electricity grid and a gas boiler for onsite heating. ...

Furnace gas is a gas which is produced in different types of furnace during the production of metals. High levels of power requirement and rising energy costs present a major challenge to the metallurgical industry. Some furnace gases created as a ‘free’ by-product during production processes serve as an attractive fuel for power generation. In addition to the economic benefit, using ...

Trigeneration or combined cooling, heat and power (CCHP), is the process by which some of the heat produced by a cogeneration plant is used to generate chilled water for air conditioning or refrigeration. An absorption chiller is linked to the combined heat and power (CHP) to provide this functionality. Quadgeneration takes this process one step further with the addition of systems to ...

Approximately 25% of the usable energy of the fuel gas is released in the exhaust of the gas engine. This can be captured for cogeneration in a combined heat and power plant. This heat exits the engine at ~450oC as ‘high grade heat’, contrasting to ‘low-grade heat’ available from the generator cooling circuits. This high temperature and flow makes it well suited for ...

Clarke Energy is a KOHLER company and distributes KOHLER generators in the South Pacific which are suitable for a wide range of applications. Our generators are designed and manufactured in the KOHLER facility in France with more than 50 years of product optimisation experience, available with a “plug-and-play” design philosophy for ease of installation. Dedicated KOHLER service and ...

Combined heat and power (CHP), or cogeneration, offers a range of potential benefits for residential applications. Cogeneration systems are successfully applied in a wide range of residential applications. Gas engine cogeneration systems can provide significant financial savings on fuel costs used to provide electricity and heat. In some countries the government provides tax benefits to the owner ...

Agricultural biogas plants utilise organic materials found on farms to generate biogas, a renewable fuel source and in turn renewable power through cogeneration / combined heat & power. The plant may be designed to accept energy crops that have been grown specifically to input into the digestion facility or agricultural wastes. These crops are typically ensilaged and stored in clamps or ...

The spent byproducts of distilleries have historically been treated as waste. However, the liquid and solid wastes of the distillation industry have greater potential and can be sent to anaerobic digesters and converted into biogas. This biogas in turn can be turned into renewable electricity at high efficiency via GE Jenbacher gas ...

Coal mine methane (CMM) is a type of gas present in active, working mine sites. This gas is extracted from the air in the coal mine helping improve safety and preventing uncontrolled release of methane to ...

The Jenbacher Type-2 gas engine was introduced in 1974 and is the engine with the longest development history of the range. The 208 has 8 inline cylinders and is available at electrical output from 249kWe or 335kWe. The J208 is renowned for its robust design and highest levels of component durability. It is particularly well suited to troublesome gases such as landfill ...

Using a combined heat and power (CHP) or cogeneration plant in a hospital is an ideal way of achieving improved energy efficiency and reduced carbon emissions. Its utilisation helps a hospital’s limited financial resources go further. Natural gas is a clean-burning low carbon emission fuel. A CHP plant facilitates the high efficiency use of this fuel, by recovering not only electricity but ...

Carbon Capture, Utilisation & Storage (CCUS) is the process of capturing CO2 from energy intensive processes before it enters atmosphere and finding a market use or transport to a storage facility (normally underground in geological caverns). Long-term storage of CO2 in a geological formation is still relatively new as a concept but will play a huge part in the net-zero efforts in the future. ...

Absorption chillers can be used to deliver a trigeneration solution for a combined heat and power plant. Absorption chillers produce chilled water by heating two different substances that are in thermal equilibrium to separation, then reuniting them through heat removal. An example of two substances that may be used for this process is water and lithium bromide. Absorption chillers can be ...

Continuously refined on GE Jenbacher’s extensive experience, the GE Jenbacher type 6 engines are reliable, advanced products serving the 1.8 to 4.4 MW power range. It’s 1,500 rpm engine speed results in a high power density and low installation costs. The type 6 pre-combustion chamber achieves maximum efficiency with low emissions. Proven design and optimised components enable a ...

The GE Jenbacher container is a high quality unit which can be deployed where economical and speedy installation is required. The GE Jenbacher containers are fully tested when they leave the production facility and are excellent for plug-and-play applications. The overall compact design ensures a space saving installation with service-orientated ...