Steam Traps Equipment & Supplies In Africa

Thermostatic and thermo-dynamic steam traps, Ball float traps, Plunger valves, Flow through sight glasses. Cast Iron, Steel, Stainless Steel. DN 15 - 150, G 1⁄4 - 2, PN 6 - 640, ANSI class 150 - ...

The natural benefits of the Pick Heater and it’s unique injection tube design provide an effective way of blending condensate streams ...

SMART Steam Trap Insulation Jacket model I-SVT 15/20 and I-SVT 25 are designed to go with the SMART Steam Trap model SVT 15/20 and SVT 25. Jackets are custom-designed to snug around the SMART Steam Trap. The flexible outer material and Velcro system make them easy to install and remove in seconds, without the need for any tools during the steam trap PM maintenance or inspection. They are ...

Orifice plate technology was developed in the 1960’s by the U.S. Navy. The use of orifice plates to replace a ship’s mechanical steam traps proved to significantly reduce failures while dramatically improving the steam system efficiency. Today orifice plates like these are typically referred to as orifice steam traps. Orifice plates have been traditionally relied on for condensate ...

The enterprise should depend on energy saving to survive. In all steam application industries, energy saving is throughout its whole process.. Hence, energy saving will be the outlook of steam technology ...

Pelltech Public range burners are fully compatible with oil and steam boilers, baking ovens, driers and other similar systems that require cost effective and sustainable heating solutions. The burners are self cleaning with automated ash removal system. Installation and setup of Pelltech burners is simple and straightforward. Once up and running, our burners require very little maintenance thanks ...

The GEM Trap is a staged venturi orifice steam trap. It has no moving parts so will not wear and cannot fail. The unique venturi orifice technology utilises the expansion of the flash steam created by the pressure differential across the trap to control the flow of condensate. Operating over variable loads, the GEM Trap will suit all industrial applications. The single piece bodies are ...

A reliable and durable stainless steel steam trap with tight shut-off for use on small-size process equipment. Self-modulating free float provides continuous, smooth, low velocity condensate discharge as process loads vary. Precision-ground float, constant water seal and three-point seating design ensure a steam tight seal, even under no-load conditions. Only one moving part, the free float, ...

Ayvaz SK-51 float steam traps especially perform continual evacuation at the steam saturation temperature. Ayvaz SK-51 doesn’t affect instantaneous and large pressure shift. SK-51 is mainly applied at the systems where the condensate is evacuated rapidly and it is also ideal for automatic temperature control system. Air and condensate evacuate is carried out by thermostatic capsule. So ...

The TD600 model steam traps are designed for high-pressure applications up to 600 PSIG and are commonly used in drip applications such as draining condensate from steam mains and steam supply lines, as well as steam tracing applications. Notably suitable for outdoor settings subject to freezing or superheated steam conditions, TD600 steam traps feature a robust design with hardened stainless ...

In conventional designs, the flash steam produced due to the pressure difference between the steam trap’s upstream pressure and the atmospheric pressure at the condensate tank is vented to the ambient air. However, the energy of the produced flash steam is almost tantamount to that of the returned condensate; therefore, it is highly recommended that the flash steam is ...

The IB980 Series Inverted Bucket Steam Trap is a robust and efficient solution for steam management in industrial applications. Crafted from high-quality cast iron, this steam trap is designed for durability and reliability. Available in sizes ranging from 1/2 inch to 3 inches, it supports both NPT and BSPT screwed ends, as well as PN, JIS, and ANSI flanged ends, making it versatile for various ...

The HI-R-Temp thermal fluid heater is a forced circulation coil type thermal fluid heater in which fluid circulates through a set of coils. More efficient than helical coil type heaters, the HI-R-Temp® thermal fluid heater coils are parallel connected and have a minimum of seven concentric layers. The pump is sized specific to the flow rate and pressure drop requirements of each ...

Universal forged Steam Traps turn loss of steam into ...

As the name suggests, seamless pipes are made without a weld-joint or a seam. They have a uniform structure and strength all over. They can withstand the corrosive atmosphere, high pressure, temperature, and stress. Thesecarbon steel pipescan be manufactured in straight units of single or double random lengths or fixed ...

Traditional steam traps rely on an opening and closing cycle to allow condensate to pass but prevent steam from doing so as well. They are purposely oversized for the intended applications so that they may be sold with little, if any, technical or application support required. It is not uncommon for a trap to have a capacity for hundreds of pounds of condensate per hour when the actual load is ...

GESTRA Flowserve steam traps, Float steam traps, Thermostatic steam traps with bimetallic ...

Thermodynamic steam traps without filter for the extraction of steam condensates. For use in: steam piping, irons, laundries, tanks and vessels with condensate discharge, multiple plate presses, vulcanizing autoclaves, pressure reduction equipment, ...

Pelltech Public range burners are fully compatible with oil and steam boilers, baking ovens, driers and other similar systems that require cost effective and sustainable heating solutions. The burners are self cleaning with automated ash removal system. Installation and setup of PV50b burner is simple and straightforward because it uses an ordinary 90mm oil burner flange and standard oil burner ...

The Delta nHRi Venturi Steam Trap is designed for high-load process applications including heat exchangers, reboilers, BJSIFBUFST, etc. The nHRi has a removable insert. " strainer DBObe fitted upstream of the ...