Tube Heat Exchangers Equipment & Supplies In Asia & Middle East

A Steam Tube Rotary Dryer is a type of industrial drying equipment used in various processes to reduce the moisture content of materials. It is particularly useful for handling bulk solid materials that require uniform drying over a large volume. Steam tube rotary dryers are used in a variety of industries including agriculture (drying grains), mining (drying ores), and chemical processing ...

Get something back from your waste with our innovative range of heat exchange modules. Inciner8 have found the optimal way to convert energy from waste and make it usable whether you need it for washing, disinfection, heating, or for your technological ...

- Ideal for combination with combined heat and power units or gas turbines - Environmentally friendly generation of steam and hot water from available waste heat - High efficiency through efficient tubular heat exchanger and thermal insulation - Cost-efficient to purchase and operate as no burner is ...

Fluorotherm™’s Immersion Coil Heat Exchangers have been proven worldwide in a vast range of applications since 1965. Ruggedness of design, a vast experience base, internal control of all aspects of specifications and manufacturing, and unmatched technical support are the key reasons behind customer loyalty over the decades. Fluorotherm™ heat exchangers possess corrosion ...

A finned tube heat exchanger is specifically designed to enhance the efficiency of heat transfer by increasing the surface area over which heat can be exchanged. This type of heat exchanger is commonly used in various applications including air conditioning, refrigeration systems, and industrial processes where heat recovery is crucial for energy ...

- Environmentally friendly generation of steam from available waste heat - The perfect addition to energy concepts involving combined heat and power generation - High efficiency through efficient tubular heat exchanger and thermal insulation - Additional efficiency gain thanks to optional integrated economiser - Matched, modular system for easy planning and fast ...

Tube–tube heat exchanger (TTHE) is a low cost, vented double wall heat exchanger which increases reliability by avoiding mixing of fluids exchanging heat. They are manufactured as a fully-welded design, with removable end caps and insulated if ...

Fluorotherm™ shell and tube heat exchangers are used for in-line heating and cooling applications for corrosive and ultrapure fluids. These units have been designed with efficient heat transfer as the primary purpose, offering a baffled cross flow heat exchanger. Our shell and tube heat exchangers are commonly used for oil refinery and chemical processes applications, and while they're ...

Ultra-compact steam boiler producing up to 5,200 kg/h of steam, built to EN 12953 standard. The CSB excels with its high efficiency rating of up to 95.3% and its low emissions already comply with future requirements of the MCP Directive (EU) ...

In a CAPFPR, the monomers, solvents, and catalysts are continuously fed into the reactor at one end. The agitator(s) inside the reactor ensure that the mixture is well-stirred, promoting even reaction conditions. As the reaction progresses, the polymerizing material moves through the reactor in a plug flow fashion, exiting from the other end once it has reached the desired conversion and ...

RYDLYME Biodegradable Descaler is used to safely and efficiently dissolve tough mineral deposits such as water scale, limescale, calcium, and rust from the water side of industrial equipment! Recommended by the U.S. Navy and countless OEMs, RYDLYME descaling chemical is NSF-registered for use in various industries and applications including beverage, pharmaceutical, bottling, and food processing ...

The innovative design of our TWISTED TUBE Heat Exchangers delivers more efficient and more reliable performance than conventional shell and tube heat exchangers. TWISTED TUBE Heat Exchanger Technology features a revolutionary bundle construction that increases heat transfer and reduces pressure drops while increasing heat transfer surface area and eliminating damaging vibration. Additionally, ...

Tubular or shell and tube heat exchanger consist of graphite pipes and tube sheets, in which the pipes are fastened. For the guidance of the medium on the shell side and the stabilization of the apparatus baffles are assigned. Shell and Tube Heat Exchanger are characterised by a very small pressure loss and are suitable in particular for applications, with which a large heat exchange surface is ...

Heat exchangers are used in almost all industries. Design Software are used as per customer requirements to get efficient results. Shell and tube type heat exchangers are designed and manufactured under ASME Section VIII Division 1 and TEMA. We manufacture Condensors, Oil Coolers,Intercoolers, After Coolers, ECONOMIZERS, Surface Condensors, Liquefiers, Pre heaters and many more. ...

High heat transfer copper round tubes with aluminum louvered plate fins. Tubes are mechanically expanded into self spacing fin collars for maximum heat transfer. Type L copper headers are used for inlet and outlet with MPT steel connections that can be fitted with flanges for field connections. 3/8” FPT steel vent and drain connections are provided for each ...

Multi-tube design heat exchanger, with welded or detachable tube bundle, hygienic design according to 3A standards, with corrugated or smooth tubes, recommended for processing low and medium viscosity fluids, homogeneous fluids or fluids with small particles in suspension. Temperature conditions 180°C and 25 bar pressure (others on request). Manufactured in stainless steel, Duplex and ...

Cooling of wort carried on after cooking and before fermentation in whisky production is an essential part of the process, since the working temperatures range is very tight, and at higher temperatures, it happens a reduction in the fermentation power, as well as a loss of evaporated alcohol and a reduction of the ...

Corrugated Tube: These are corrugated tube heat exchangers formed by two concentric tubes and are especially useful for treating slurries (fluids which contain significant amounts of fibres or suspended particles) and particulate ...

The application possibilities and shapes of heat exchangers are many-sided. Because of our technical expertise, which we have gathered in our many years in the field of building heat exchangers, we can offer you the optimum solution for many ...

Vahterus’ unique Plate & Shell Heat Exchanger (PSHE) is at the forefront of heat-exchanger technology. The core is a fully welded plate pack enclosed in a strong shell structure, which eliminates the need for gaskets. Due to its advanced construction, Vahterus PSHE combines the best features of Plate & Frame and Shell & Tube heat exchangers. Our PSHE has numerous advantages over ...