Tube Heat Exchangers Equipment Supplied In Canada

RYDLYME Biodegradable Descaler is used to safely and efficiently dissolve tough mineral deposits such as water scale, limescale, calcium, and rust from the water side of industrial equipment! Recommended by the U.S. Navy and countless OEMs, RYDLYME descaling chemical is NSF-registered for use in various industries and applications including beverage, pharmaceutical, bottling, and food processing ...

Brass nned exchangers are very dicult to clean due to the binding agent collecting in small ns, trapping in the foulant. Conventional high pressure water blasting increases the risk of tube and n damage. We were required to remove the hydrocarbon fouling from the shell side while not damaging the expensive brass nned ...

A proud member of the Canadian Heat Exchangers and Vessel Manufacturers Association, Price-Schonstrom can custom design and manufacture the heat exchanger you need to optimise your process and minimise your utility costs. We have the capability to design shell and tube heat exchangers to TEMA and ASME codes, and work with stainless steel, mild steel, copper and specialty ...

Stainless Steel Fire Tube Heat Exchanger with non-metallic base. Floor Standing Boiler with optional wall mount kit. Available in 6 Sizes: 70, 110, 155, 220, 299, 399 MBH. Modulating Condensing Boiler . 95% AFUE (70-299); 96.5% Combustion Efficiency (399). 4 Pump/Auxiliary Outputs (Example: 1 boiler loop pump +3 zone pumps). Up to 8 Multiple Boiler Control with lead/lag rotation. Modbus® ...

The API Basco Type 500 Shell & Tube Heat Exchanger offers the cost effectiveness that comes with having a standard design, while easily providing for various options to meet specific customer requirements. There are size and material options and they can be a fixed tubesheet design or a u-tube removable bundle. Units are available as Commercial Standard, ASME ( CRN ) or ASME/TEMA-C (with ...

Enerfin’s shell and tube heat exchangers are custom designed and manufactured in conformance with the latest ASME Section VIII-1 and TEMA standards to ensure secure mechanical integrity and to meet your needs. We offer you “U-Stamp” or CRN registration upon request. Our state-of-the-art heat transfer calculation software is used to optimize the dimensions of the shell and ...

PATTERSON Industries Canada 'The Process Equipment People' designs, engineers and manufactures Heat Exchangers and Condensers to meet individual customers process requirements. ...

Replacement tube bundles specializing in non-standards custom shell and tube heat ...

To complete digester heating systems OTI often supplies Dual-Fuel Boilers designed to fire on the methane gas produced in the anaerobic digesters. The boiler is used to heat water that is necessary for the heat exchangers to heat the sludge in the digesters. The Dual-Fuel Boilers can fire on a supplemental fuel source such as natural gas, propane, fuel-oil, etc. at periods when there is ...

B6-Series heat exchangers are fabricated with the distinctive AIC thin-tube, high-density design. Intended for use with high fluid flows and close approach temperatures, these robust, compact units are ideal for many residential and industrial applications. B6 heat exchangers have a performance closer to their compact brazed plate type counterparts owing to the unique thin-tube design ...

Cobrex is a straight, shell and double wall tube, heat exchanger with visual leak detection. A one-pass vertical design, it is constructed entirely of pure copper with internally corrugated tubes, and closely spaced directional baffles, for maximum heat transfer. Cobrex is an ideal solution for tankless instantaneous, and semi-instantaneous, hot water generation. ...

There are two fundamental steam generator designs used in commercial power systems in North ...

The G7000 was purposely designed for larger applications and multiple structures. A larger firebox gives greater heating capacity and long burn times for buildings up to 7,000 ...

The VariMax™ OTH (Once-Through Heater) is a high efficiency, industrial, indirect-fired gas heater used to heat process air streams without contaminating the air with the products of combustion. The OTH is well-suited for recirculating ovens, dryers, makeup-air applications in cold environments, and industrial processes with moderate temperature rises. The counterflow configuration, ...

Claro provides complete heat and energy recovery systems for municipal, industrial, and agricultural applications. We can recover up to 85% of outgoing heat energy from process tanks such as anaerobic digesters with Claro modular tube-in-shell or large gap heat exchangers. Energy cost-savings are immediate and translate into very quick pay-back ...

Claro designs and manufactures three proprietary heat exchangers that heat, cool, and recover energy by means of water-to-sludge or sludge-to-sludge energy ...

Radiators, more correctly called Air Cooled Heat Exchangers (ACHE), are large pieces of equipment compared to other types of heat exchangers and require free space around them for the cooling airflow. Tube bundles (the core) configurations are positioned horizontally (with vertical airflow as shown), or can be arranged vertically (with horizontal airflow). Placement can be in front of the engine ...

70,000, 110,000 & 155,000 BTU input models at 95% AFUE. Stylish, compact wall mount design for easy installation, service and maintenance. Unique condensing stainless steel fire tube heat exchanger design. Built-in boiler circulator. Built-in primary/secondary piping option. Pre-wired terminal strip for quick and easy electrical connections. Convenient indirect-fired water heater connection. ...

Kenics® Static Mixer technology, available exclusively in Kenics® Heat Exchangers, offers the highest available coefficients for fast, uniform heat transfer. Capable of reliable operation in a wide range of process applications, including those in the polymer, plastic, and food and beverage industries, Kenics Heat Exchangers require less space, less energy and less residence time than ...

The Thermo-T tubular heat-exchanger is designed to recover heat from energy-consuming processes up to 2000°F. Energy can be recovered and returned as process make-up air, used to preheat combustion air, or used for plant or office heating. Thermo-T offers fully adjustable tube-size and tube-spacing as well as both single-pass and multi-pass ...