Turbine Monitoring Equipment & Supplies In Ohio

The SpectrOil M/F-W has become the standard instrument when on-site and immediate fuel analysis is a necessity. It fulfills the requirements of ASTM D 6728, Standard Test Method for Determination of Contaminants in Gas Turbine and Diesel Engine Fuel by Rotating Disc Electrode Atomic Emission ...

Onshore and offshore turbine-mounted horizontal wind Lidar for measurements from 10 to 550+ meters in front of a ...

The Qualvista Biogas Monitor provides the biogas industry a continuous, cost-effective and robust method for siloxane, methane, carbon dioxide, hydrogen sulfide and oxygen measure-ments. Qualvista has developed the monitoring system together with VTT Technical Research Centre of Finland. The monitor’s siloxane measuring technology is patented and Qualvista holds exclusive rights for ...

Wind power has been experiencing an extraordinary development in the last few years. And it is expected to grow at a rate of 30% per year in the near future. In Italy it has been the source that has reported the highest growth in the last decade. ...

e-PCM monitors the condition of generators and their prime movers, effectively using the generator itself as a sophisticated transducer. It uses advanced NASA-developed technology to provide automated set-up and fault diagnosis with minimal user intervention. It is simpler to use and more cost-effective than conventional systems. e-PCM is applicable to a very wide range of equipment, ...

The WM series smart condition monitoring system independently developed by Windey mainly covers WM.Smart 1 wind turbine drive chain monitoring system, WM.Tower 1 tower safety and foundation uneven settlement monitoring system, WM.Blade 1 blade health monitoring system, WM.Oil 1 oil quality monitoring system, WM.Bolt 1 bolt condition monitoring system and monitoring systems for other functions. ...

Our inspection solution helps streamline blade maintenance operations for equipment at wind power plants. Blade inspections, which have traditionally been performed from the ground via visual inspections, can be digitized using our drone solution reducing the time spent on inspections while simultaneously improving the quality of blade ...

The Cyclone series is an alternative to the known windmills. These turbines are made to measure and range from 1 MW to 12 MW. I.p.v. depending on the more powerful wind in the higher wind layers, the Cyclone work turbines by catching the wind on the largest possible vertical ...

We develop cost-effective hydropower plants that can be installed in any river, canal or waterway that has a drop between 1.5 - 5 m. You can generate electricity using an individual turbine or a network of multiple turbines for higher energy demands, all designed for durability and low ...

Low start up speed, 3 or 5 blades optional for different wind speed areas, high wind energy utilization. Amazingly quiet operation with minimal vibration. Easy installation, tube or flange connection optional. New art of precision injection molding blades with aerodynamic shape and structure, high efficiency. Body of casting aluminum alloy, with 2 bearings swivel makes it stronger. Patented AC ...

The Nordex N100/2500 kW is a 2.5 MW wind turbine specially configured for moderate and low wind conditions. The N100/2500 is one of the largest turbines in the Nordex product line and its yield rates among the highest in its power class. With a rotor sweep of 7,854 square metres, this IEC-2 certified turbine operates particularly profitably in medium and low wind ...

The fully modular concept of our measurement units allows you to configure and optimize performance and therefore cost according to your specific ...

Lifecycle services to ensure steam turbines run at peak performance. Peak performance: Turbines are expensive and production-critical pieces of equipment that need to be up & running at peak performance at all times. Avoiding unplanned downtime and extracting the maximum energy output, rank high on the wish list of most asset owners. While being a stand-alone piece of equipment, turbines are ...

The first turbines in the S6X series from Suzlon were manufactured in 2002 and eventually phased out in 2016. Today 3673.75 MW of total capacity of S62 and similar turbines (S64 and S70) is installed around the globe. S62 turbines feature an asynchronous generator with a SFS (Suzlon Flexi Slip) system. This enables the generator to run with a high slip and thus operate within a limited speed ...

Manufacturing of the S6X series wind turbines began in 2002 and Suzlon eventually phased out production in 2016. Around 3673.75 MW of total capacity is installed around the globe (counting S70, S64 and similar turbines). Suzlon built the S70 turbines with an asynchronous generator and a SFS (Suzlon Flexi Slip) system, enabling the generator to run with a high slip. In combination with the pitch ...

Suzlon inducted the S82 turbine in 2006 and phased out production in 2015. During these years a combined capacity of around 3034.5 MW was installed worldwide. S82 turbines contain an asynchronous generator with a SFS (Suzlon Flexi Slip) system enabling the generator to run with a high slip and operate within a restricted speed range. This – in combination with the pitch system – makes ...

SWP-20kW is a rock solid Class 2-wind turbine which has been developed for sites especially abundant with wind. The wind turbine is based on proven technology which ensures high energy production and a long and problem-free life ...

Utilising a variety of access techniques for inspection, GEV are able to provide a fast and effective service to complete the detailed analysis of all aspects of damage to the ...

Environment One's Dual Hydrogen Control Panel (DHCP) was designed specifically for monitoring scavenging seal oil generators. The DHCP contains two independent analyzers that monitor the turbine-end seal drain enlargement, collector-end seal oil drain enlargement with both valving for manual or DCS operation for checking casing purity of the generator. The DHCP has the ability to automatically ...

Made with professional-grade materials, the Horizon Renewable Energy Trainer allows a semester of high-quality experiments in renewable energy for any laboratory. The included solar energy simulator, projector, and wind turbine provide multiple renewable energy technologies for students to explore. The interactive software, also included, enables complete control of every aspect of the simulators ...