Turbulators Product Applications

The Lidar technology becomes indispensable in the development of wind energy projects, especially when it expands from onshore to offshore. The wind measurement solution by lidars is more cost-saving and feasible. The offshore lidar wind energy is under fast development with the achievements of lidar technology. The wind energy Lidars not only output wind speed, wind direction and turbulence intensity. Its precise and reliable wind data output reduces measurement uncertainty and meet the requirements to create a ...

By Qingdao Leice Transient Technology Co., Ltd. based in Qingdao, CHINA.

Programme overview: The conventional wind profile monitoring is mainly based on multi beam inversion calculation. The premise of measurement is that the horizontal wind field is uniform, while the horizontal wind field on the underlying surface of mountainous and urban complex terrain is uneven, especially near the ground. Therefore, in the detection of complex underlying surface, complex algorithm is often used to eliminate the turbulent data. However, the virtual tower (VT) technology, based on the cooperative ...

By Qingdao Leice Transient Technology Co., Ltd. based in Qingdao, CHINA.

Programme overview: In the preliminary assessment of wind resources, surveys, and refined site selection, the placement of lidar and power supply are issues that need to be carefully considered. The location should avoid deep valleys, cliffs and other highly turbulent terrain. Since there is usually no mains power supply during the measurement, solar cells, small wind turbines or fuel power sources are required for power supply. According to weather conditions such as heavy fog, the integrated wind speed deep ...

By Qingdao Leice Transient Technology Co., Ltd. based in Qingdao, CHINA.

For more than 40 years our turbulators are used in fire-tube boilers to increase its efficiency. Often strict pressure drop limitations exist due to the maximum ventilator capacity. Our left-right twisted turbulator design is known to have an optimal ratio between pressure drop and heat transfer with a gaseous heat medium. Based on our own pressure drop and heat transfer correlations JD-Turbulators can make a calculation of the optimal turbulator geometry and material with the given dimensions and conditions of ...

By JD Turbulators B.V based in Raamsdonksveer, NETHERLANDS.

The value of applying turbulators in air heaters and radiant tube heaters is known for decades. With more stringent efficiency norms such as the new Eco-design, its use is becoming more and more popular. With turbulators the desired efficiency can be obtained with a considerable smaller heater ...

By JD Turbulators B.V based in Raamsdonksveer, NETHERLANDS.

Our spiral turbulators can be an interesting option for heat exchangers, coolers and condensers when the flow regimes and viscosities of the cooling fluids are such that it is causing a laminar flow. We are able to manufacture our spiral turbulators in twist ratios (360o pitch / width) between 2,6 and 12 and in a wide range of dimensions and materials, ensuring application in a broad range of heat exchanger devices. For instance a recent application of our turbulators within heat recovery shower drains. Our ...

By JD Turbulators B.V based in Raamsdonksveer, NETHERLANDS.

For the majority of the licensors of sulphuric acid processes represented on the market, CS builds burners and combustion chamber systems for the combustion of liquid sulphur, with or without a downstream waste heat ...

By CS Combustion Solutions GmbH based in Wien, AUSTRIA.

Next to increasing the heat exchanger efficiency, turbulators are used to clean scale deposits of the fluepipes from biomass boilers. As fouling in the heat exchanger is the primary cause of a decreased boiler thermal efficiency within time. Cleaning of the heat exchanger tubes of biomass boilers is essential to restore maximal system performance. Our spiral turbulators are an economic solution for both cleaning and efficiency for many biomass boiler manufacturers in ...

By JD Turbulators B.V based in Raamsdonksveer, NETHERLANDS.

The fine and speciality chemicals sector often deal with high-value products, expensive raw materials and high capital costs. In this environment product integrity and process efficiency are paramount. The production of compounds for use in everything from paints and pigments to fuels and additives, pesticides to cosmetics and toiletries requires high standards of security and quality control. The exact requirements will depend on the chemicals involved and their properties. Some single substances will require ...

By HRS Heat Exchangers Ltd. based in Watford, UNITED KINGDOM.

Industry runs on machinery. Bearings, pumps, electric motors, compressors, presses, gearboxes and much more. All of which can break unexpectedly, causing production to stop. When production stops your organization loses ...

By SDT Ultrasound Solutions based in Brussels, BELGIUM.

Acid cooling, solvent separation and condensation, reactor control, reboiling, resin thermal control, caustic production and advanced heat recovery duties are all proven duties for Tranter Plate Heat ...

By Tranter Inc based in Plano, TEXAS (USA).

Isolation valves and control valves for wet corrosive chemicals. Flanges tightening by hydraulic bolt tensioners. Heat exchangers for slurries and viscous products. Enhancement of tube & shell heat exchanges by addition of turbulators. Heat exchangers for gases or water with polymer fines. Heat exchangers for corrosive products. Heat recovery from low pressure vapours. Safety spray shields for piping ...

By Techlink Associated International Engineers based in Villeneuve d’Ascq, FRANCE.

Steam is an essential resource used in many industrial processes. Facilities using steam have a vast network of piping, valves, flanges, and steam traps designed to deliver clean, hot, pure, and efficient steam from the boiler room to its intended point of use. Within steam systems there exists constant flow and ...

By SDT Ultrasound Solutions based in Brussels, BELGIUM.

Tranter offers rich applications experience solving problems and improving processes for more than 85 years. Among these are the primary metals, food and beverage and wastewater treatment segments, plus others too numerous to ...

By Tranter Inc based in Plano, TEXAS (USA).

Algae’s biomass, once refined, can be used for animal feed and its lipid oil for blended petroleum based ...

By Royall Dissolved Air Floatation Corporation (DAF) Products, LLC based in Reedsburg, WISCONSIN (USA).