Energy Monitoring Product Applications Available In Asia & Middle East

Overview Machine Condition Monitoring based on oil analysis has become an important, if not mandatory, maintenance practice for the construction, mining, and agricultural industries. Equipment in these industries are frequently exposed to severe environmental and working conditions. An effective oil analysis program will keep important assets in operation by reducing unexpected failures and costly unscheduled ...

By AMETEK Spectro Scientific based in Chelmsford, MASSACHUSETTS (USA).

Delta-T Devices solar radiation measurement instruments are well suited to scientific research, meteorological applications, and commercial photovoltaic validation/monitoring. Our range includes the SPN1 Sunshine Pyranometer and BF5 Sunshine Sensor – both of which measure global (total) and diffuse radiation, and sunshine state (all in a single instrument). They are also easy to use and need no routine adjustment or polar ...

By Delta-T Devices Ltd. based in Burwell, UNITED KINGDOM.

Power plants are expected to operate 24 hours per day, 7 days per week. Downtime and equipment derating (when a generator fails to deliver power at its rated capacity) can cost a power plant thousands of dollars per hour. The cost of replacing failed equipment is also extremely high. Vibration analysis by itself is not enough to anticipate catastrophic failures. Oil analysis is often able to detect problems at a much earlier stage than vibration analysis. This is why more and more power plants are bringing oil ...

By AMETEK Spectro Scientific based in Chelmsford, MASSACHUSETTS (USA).

The growing awareness and use of biomass and hydrogen as renewable energy sources is critical to future energy growth. CCC technology has been used for years to enable stable engine operation using biogas that can vary greatly in quality. The advanced designs of the CCC embedded fuel valve controls allows seamless operation with all forms of renewable gas, including blended fuel ...

By Continental Controls Corporation (CCC) based in San Diego, CALIFORNIA (USA).

Programme overview: In the preliminary assessment of wind resources, surveys, and refined site selection, the placement of lidar and power supply are issues that need to be carefully considered. The location should avoid deep valleys, cliffs and other highly turbulent terrain. Since there is usually no mains power supply during the measurement, solar cells, small wind turbines or fuel power sources are required for power supply. According to weather conditions such as heavy fog, the integrated wind speed deep ...

By Qingdao Leice Transient Technology Co., Ltd. based in Qingdao, CHINA.

Accurate Wind Resource Assessment. Power Performance Verification. Bankable Data to Reduce Fund Risk. Power Curve Assessment and Prediction. Turbine Efficiency Evaluation. Turbine Wake Detection. Wind Farm Control and Optimization. Wind ...

By Qingdao Leice Transient Technology Co., Ltd. based in Qingdao, CHINA.

Manufacturers of food and beverages typically have a high volume of product passing through their facilities at all times. For this reason, any unexpected downtime can be very costly in terms of lost production. In addition, many food and beverage facilities have difficult challenges associated with lubricant contamination. Many of these facilities have a lot of water or steam being used to clean and sterilize products and packaging. Water can get into the lubrication oil and become a very troublesome contaminant. ...

By AMETEK Spectro Scientific based in Chelmsford, MASSACHUSETTS (USA).

Engine manufacturers use Spectro Scientific oil analysis instruments to assist in engine testing during new product development, testing engines during manufacturing run-in, and for qualifying new lubricants. Engines include: Gasoline and diesel automobile engines. Truck and other high speed diesel engines. Medium speed diesel engines such as those used for locomotives, marine and power generation. Extremely large low speed diesel engines for marine propulsion and power generation. Motorcycle engines. High ...

By AMETEK Spectro Scientific based in Chelmsford, MASSACHUSETTS (USA).

Overview Oil analysis has long been practiced for aircraft engines and other airborne oil-wetted systems such as hydraulic systems and gear boxes in helicopters. Military organizations are perhaps the number one users of oil analysis testing and commercial aviation also has a long history of oil analysis. A number of airlines throughout the world do their own oil analysis, but in many cases they send samples to commercial oil laboratories. Engine manufacturers also do oil analysis as part of engine development ...

By AMETEK Spectro Scientific based in Chelmsford, MASSACHUSETTS (USA).

Overview Cities and towns are often responsible for maintaining critical assets such as water and wastewater treatment facilities and power generation plants. Oil analysis on this critical equipment as part of a robust maintenance program is a very cost effective way of failure avoidance. Additionally, greater emphasis on environmental conservation and a focus on delivering critical services while operating under reduced budgets leads municipalities to activate these programs. Spectro oil analysis solutions are ...

By AMETEK Spectro Scientific based in Chelmsford, MASSACHUSETTS (USA).

In accordance with "Standard for pollution control on the municipal solid waste incineration" (draft), all existing and new the municipal solid waste incinerators need automatic continuous on-line monitoring of main ingredients in incineration flue gas. Monitoring projects should include at least HCl, SO2, NOx, soot, etc., but also need to detect CO and HF in some higher environmental requirements ...

By Hangzhou Chunlai Technology CO., Ltd. based in Hangzhou, CHINA.

Machine condition monitoring using oil analysis is a predictive maintenance solution for industrial environments. An oil analysis program allows for reduction in unexpected failures and costly downtime for manufacturing components such as gears, pumps, compressors, engines, bearings, hydraulic systems, and other ...

By AMETEK Spectro Scientific based in Chelmsford, MASSACHUSETTS (USA).

The Lidar Wind Speed is already widely used in all phases of a wind project. The Lidar technology has made significant progress in the last decade in becoming a widely accepted source of accurate data to support resource assessment and thus, wind farm developments. The remote sensing lidars are embraced because the measurement data is accurate, reliable and bankable. The deployment and maintenance is easy and of low cost, popular in different application scenarios, especially when applied in wind industry for wind ...

By Qingdao Leice Transient Technology Co., Ltd. based in Qingdao, CHINA.

Continental Controls provides services and products for the midstream and upstream oil and gas markets. CCC products can be on anything from a small GM engine burning field gas at a wellhead in New Mexico, to a GE LM-2500 gas turbine, pumping gas from offshore platforms to Pemex gas pipelines in southern ...

By Continental Controls Corporation (CCC) based in San Diego, CALIFORNIA (USA).

Sustainable use of biofuels requires reliable and precise analytical methods throughout – from the choice of raw materials through to process optimization and on to the compliant final product. As a leading manufacturer of instruments for chemical analysis, we are quite aware of these challenges. ...

By Metrohm AG based in Herisau, SWITZERLAND.

Overview Municipal fleets include public works vehicles, public transportation and emergency vehicles. Keeping the vehicles in these fleets up and running is critical to the operations of any city or town. Many locations have their own maintenance garages to service the municipal fleet which can include hundreds or even thousands of ...

By AMETEK Spectro Scientific based in Chelmsford, MASSACHUSETTS (USA).

As more mandates for a minimum of ethanol in gasoline and biodiesel in diesel come into effect, major oil companies are blending higher percentages of biofuels at their terminals. A quick analytical measurement method to assess the blend ratio can be a valuable asset for fuel distributors, engine manufacturers, fleet operators, and regulatory agencies. The InfraCal Biodiesel and Ethanol Blend Analyzers offer a quick way to verify that fuel blends are on spec. They are ideal for use for non-technical personnel and ...

By AMETEK Spectro Scientific based in Chelmsford, MASSACHUSETTS (USA).

By inCTRL Solutions (A SKion Water Company) based in Toronto, ONTARIO (CANADA).

Power generation is one of the most important markets in any modern economy. The power generation industry involves both producing power and distributing it efficiently throughout its network. The relentless pursuit of technology innovations has existed from day one and CCC has always been a leader with the introduction of digital electronic controls. We continue to invest in R&D to maintain the most advanced line of fuel products to meet the toughest emissions around the ...

By Continental Controls Corporation (CCC) based in San Diego, CALIFORNIA (USA).

A Dutch tomato and vegetable packaging company used VPVision with an integrated industrial VPRouter to analyze and enhance their compressed air usage. Together with 6 pieces of VPFlowScope M flow meters, and 3 items of 3 Phase Power Meter, the company gains a clear view from the supply to the demand ...

By VPInstruments based in Delft, NETHERLANDS.