Boiler Inspection Equipment & Supplies

The Wager explosion-resistant and dust-proof Viewports consist of a PYREX plate glass mounted to an aluminum frame and attached to the outer boiler casing. These Viewports may be used alone or in conjunction with the Wager Boiler Inspection Light. The Boiler Inspection Light and the Viewport have both been approved for installation aboard USN and USCG vessels for Oil Drip Detection on ...

The model CEJS High Voltage Electrode Steam Boiler is the proven leader with more hours of operating experience over a wide range of applications than any competitor. The CEJS electrodes are vertically mounted around the inside of the pressure vessel which enables the CEJS to produce maximum amounts of steam in a minimum amount of floor ...

Ultra-compact steam boiler producing up to 5,200 kg/h of steam, built to EN 12953 standard. The CSB excels with its high efficiency rating of up to 95.3% and its low emissions already comply with future requirements of the MCP Directive (EU) ...

The Wager Inspection Light and Viewport are designed to be used in conjunction with one another so that one may observe any fuel line leaks between inner and outer casings of water tube boilers or may see any leaks at hand hole plates on steam headers. The Wager explosion-proof and dust proof Inspection Lights consist of an explosion resistant globe which is inserted into the outside boiler ...

The highly efficient UT-M is a three-pass boiler designed for 750 to 19,200 kW of heating at up to 16 bar. Its various output sizes and temperature ranges up to 190 °C enable flexible operation for countless process heat and heating ...

Electrode boilers utilize the conductive and resistive properties of water to carry electric current and generate steam. An A.C. current flows from an electrode to one phase to the ground using the water as the ...

The ELSB (Electric Steam Boiler) is a highly efficient, electrically heated steam generator for 350 to 7,500 kg/h steam at up to 24 bar. When operating with green energy, the boiler allows your company to achieve a CO2-neutral steam supply. Generate up to 7.5 t/h steam in a highly efficient way using just electricity – no combustion, no emissions. High steam quality, excellent dynamics, ...

A compact, reliable source of steam for space and process heating, these immersion element boilers are virtually 100% energy efficient. They are completely packaged boilers ideally suited for applications requiring from 30 to more than 10,000 pounds of steam per hour. ACME Steam Generators are based on more than half a century of accumulated experience in the electric heating field. Easy and ...

The CompuNOx control system delivers reliable operations, maximum efficiency, and reduced NOx emissions for all boilers. Its patented control design employs a proportional fan-speed-to-air-flow solution for a precise air-fuel ratio that self-corrects density to dry bulb deviation and provides unparalleled accuracy and safety. After a simple cost-effective installation, the system delivers lower ...

Coil Condensers are used for condensation of vapours and cooling of liquids. Condensers are made by fusing number of parallel coils in a glass shell. Coils are made in different diameters using tubes of different bores. The average co-efficient of heat transfer in coil condenser is considered as :- Condensation 200 - 270 Kcal/m2, hr, °C appx. Cooling 100 - 150 Kcal/m2, hr, °C ...

Benz Air Boiler Islands are custom designed and installed gas turbine sets that protect boiler plants from power outages by ensuring no steam is lost during an outage. This solution also increases heat recovery by utilizing the turbine exhaust to preheat the air for better boiler combustion. Once installed, the gas turbines will improve efficiency, save electricity, and allow your system to ...

Eric-Son supplies highly efficient biomass boilers for the production of warm water, hot water, low pressure steam and high pressure steam. Replacing fossil fuels with biomass reduces emission, operating and fuel costs, and also allow companies to be eligible for significant feed-in tariffs and carbon credits. This in turn, assist companies in mitigating their dependency from substantial price ...

Flat hot plates are flat steel products obtained by milling the substance or rectangular slab produced from scrap at approximately 800 degrees. Steel Roll : Products with thicknesses ranging between 1.20-25.00 mm in general. Sheet Metal : Products with thicknesses ranging between 6.00 - 200.00 mm and widths between 1000-3600 ...

Efficient process heating supply and heat recovery. Increasingly presented questions about energy efficiency, alternative and regenerative energies show that new concepts for efficiently storing and transporting of energy are elementary impulses for industry and society. Thermal oil systems provide thermal heat supplies and heat recovery in many industrial sectors such as the chemical industry in ...

Advantage: The series of boilers adopts an excellent design concept. Through the condensing device, the heat of the flue gas is used in cascade, and the residual heat in the flue gas is fully absorbed, so that the boiler efficiency is greatly ...

Advantage:The series of boilers adopts an excellent design concept. Through the condensing device, the heat of the flue gas is used in cascade, and the residual heat in the flue gas is fully absorbed, so that the boiler efficiency is greatly ...

Hot oil boilers are systems that can produce heat under low pressure in high temperature applications. The oil used in hot oil boilers does not deteriorate in a short time it should be designed carefully in terms of, otherwise, the film temperatures in the boiler, i.e. the oil degradation rates, may rise and new oil may be required in a short time. It should be remembered that every 10 ° C ...

Ankur Scientific has a long experience in designing Boilers and getting the same manufactured to the best world ...

Sugimat Waste to Energy Plants are designed to optimise the combustion of waste derived fuels. Sugimat have been manufacturing industrial boilers for solid wastes for 40 years. As specialists in heat output as thermal oil and manufacturers of bespoke systems to work with variable fuels this makes them ideally suited for the Tidy Planet SWIP ...

AET designs and supplies turnkey biomass boiler plants for integration into clients’ CHP and power plants with excellent and well-documented performance and ...