Cable Fault Location Equipment & Supplies In Ohio

The Pro400 Graphical TDR is a great tool for locating faults in metallic cables with 2 conductors. Twisted pair, coax, LAN cabling, etc. are simple to test for distances to shorts, opens, etc. By connecting the leads to the cable to test, a graphical display quickly and easily shows faults and events on that cable. In addition, the Pro400 transmits a standard analog tracing tone for use with ...

Discover the simplicity of Ethernet testing with NetAlly’s LinkRunner G2. A portable network analysis tool that offers advanced AutoTest diagnostics to help you effortlessly configure or validate copper and fiber Ethernet ...

TestPro Automotive allows you to test the automotive wire harness while installed in the vehicle. This makes post production line testing and troubleshooting, as well as service center troubleshooting much easier, than having to deploy a network analyzer and PC. TestPro offers a variety of hot swappable test adapters, for your specific testing needs. ...

Location damaged power cables. Fault location copper telecom cables. Coaxial cable fault location. Fault location wiring infrastructure. Detection of breaks, short circuits, damage caused by dampness and other changes in impedance of the cable. Graphic depiction of damage the cable with automatic indication the distance to fault on the ...

The LANCIER Monitoring Rail-Module-Bus is a modular and robust sensor system. Several measuring modules are mounted on a DIN rail and are directly connected to one another by means of plug-in contacts. The supply voltage, data analysis and control panel as well as their transmission to the remote measuring stations are carried out via the RM-Basic ...

The ATG 2 burn down transformer is used for impedance reduction of cable faults in low- and medium-voltage networks. The short-circuit proof 2300 VA stray field transformer delivers a maximum voltage of 10 kV and is housed in a fully enclosed 19” housing. Portable device for changing the fault resistance, Useful for cables that are difficult to access, Proven methods for complicated ...

The high performance ATG 6000 burn down transformer is used for impedance reduction of cable faults in low- and medium-voltage networks. The short-circuit proof 5.75 kVA stray field transformer delivers a maximum voltage of 15 kV and is housed in a fully enclosed 19” housing. Proven methodes for cable faults that are difficult to locate, Useful for cables that are difficult to access, ...

The Ferrolux location system is the solution for your day-to-day tasks. You can use the system to quickly and easily find cable faults. You can locate lines just as quickly, measure how deep they are and save data in the memory. The route sensor for location tasks weighs less than 1 kg, which means you can use it for lengthy periods without getting tired. Special features such as the SuperMax ...

The Siglent SHA850A series are handheld portable spectrum, cable, and antenna analyzers with VNA option. The devices are powerful and flexible tools for field and outdoor RF applications, communication engineering, telecom operation and maintenance, radio management, factory production, education, teaching, and many more. With a frequency range up to 3.6 GHz (SHA851A) or 7.5 GHz (SHA852A), the ...

e-PCM monitors the condition of generators and their prime movers, effectively using the generator itself as a sophisticated transducer. It uses advanced NASA-developed technology to provide automated set-up and fault diagnosis with minimal user intervention. It is simpler to use and more cost-effective than conventional systems. e-PCM is applicable to a very wide range of equipment, ...

Cable fault indicator Lodestar PT2 is intended for detection of fault localization in overhead and cable power distribution lines of 6-35 kV.The cable fault locator can operate in networks with insulated, grounded and resistance-grounded neutral types.The fault detector is installed on control panel board of switchgear cell / wall-mounted. ...

Network cable and link testing has never been easier with NetAlly’s LinkRunner AT. This network tester validates copper and fiber Ethernet connections in less than 10 ...

According to statistics, the most common faults in the three-phase underground power cable occur such as "single-phase breakdown" (breakdown of one of the cores to the cable sheath). Breakdown of this type can be "creeping"(intermittent) (ie recovering insulation up to a certain voltage, which is lower than the operating voltage of the cable), and with the "insulation leakage" (insulation ...

The CD-710 Cable Fault Detector is a portable system for easy identification of opens or shorts in exposed cable runs. ...

High accuracy short range detection with three programmable alert level relay outputs designed for use with the EFM-100. This kit includes the inverted EFM-100 with pole mount, and pre-wired waterproof enclosure with the ERL-10, EFA-21 (or EPM-1), relay output expansion cable and fault buzzer. Status monitor display software is also ...

AQ F210 offers a modular feeder protection and control solution for non-directional overcurrent and earth-fault protection with automatic reclosing. Up to four optional I/O or communication cards are available for more comphrehensive monitoring and control applications. The AQ F210 communicates using various protocols including IEC 61850 substation communication ...

ETL40 Van Mounted Cable Fault Locating System is the most advanced system in power cable fault detection combining the best-in-market technologies into a single fully automatic centralized setup with high reliability and multi-level safety standards. The system is capable of locating faults on low & high voltage cables and pinpointing cable faults of cables with DC voltage up to 40kV. ETL40 ...

TDR Time Domain Reflectometer / Network Analysis / Cable Test. Ensuring your customers stay connected to your network is your number one priority. The 1205CXB TDR is the perfect tool to pinpoint copper cable faults - quickly, easily and accurately. Radiodetection has created the 1205CXB Metallic Cable Analyzer TDR to make finding cable faults quick and easy. The ultra-clean, low noise signal in ...

The first platform to offer proactive monitoring, detection and location of both insulator and conductor faults on live low voltage unearthed power distribution systems. CableGuardian encompasses proven technology with extensive industrial heritage in challenging environments to provide a distributed and intelligent cable infrastructure health monitoring system for various electrical ...

The XT IEC series includes non-reversing and reversing contactors and starters as well as overload relays and accessories. Enclosed control options include metallic and non metallic enclosures with circuit breakers, and North American or European fuses. The XT line of IEC motor control is not the same as traditional motor control designs. XT was designed to be engineered ...