Engine Monitoring Equipment & Supplies In Latin America

With the MCM-K16DBI-10A module, up to 16 signal channels can be switched in each case to the two signal outputs. By the use of the relay, the individual channels are electrically isolated from each other. The module is ideal for switching signals in test systems and test systems. The module is suitable for switching of average currents, as they occur in various amplifiers in engine control ...

This replacement 12-inch contact wheel is part of the Remote Contact Assembly. The RCA is an optional accessory for Monarch's PLT200 Pocket Laser ...

With the MCM-25A K08DBI assembly eight signal channels can be switched in each case to the two signal outputs. By the use of the relay, the individual channels are electrically isolated from each other. The MCM-K08DBI-25A module is ideal for switching signals in testing and test systems. The module is suitable for switching high currents, as they occur in the ignition or injection into engine ...

The Continental Controls Corporation Black Box, also known as the CCC Black Box (or Z-Box), is a specialized device used to monitor and control engines. It is a compact, rugged electronic control unit designed to withstand harsh operating conditions. The CCC Black Box is responsible for managing a wide range of functions, including engine speed control, fuel flow, temperature regulation, and ...

The CCC Catalyst Monitor by Continental Controls Corporation is a centralized control system that allows for multiple inputs (O2 Sensor, NOx Sensor, Cat dP, Cat Temperature), and outputs enabling optimal performance when combined with CCC ECV5 air-fuel ratio control valve and an NSCR or Oxidation catalysts. Acting as a central communication hub, it integrates inputs and outputs for various ...

The Bergen B-series is based on a modular design, which gives a flexible platform and at the same time carries forward the Bergen traditional values as a robust and reliable engine. The selection of technology was done after consulting a broad range of operators, designers and shipbuilders, to establish the qualities they prize in an engine. This engine series was first introduced to the market ...

Heavy aluminum bonding wires and aluminum bonding ribbons are used for a wide variety of purposes. Since aluminum has twice the current-carrying capacity of copper per unit of weight, they are essential whenever power (i.e. not only signals) needs to be ...

The high performance fan Mod. RS with upturned blades is used for the job where is necessary an high capacity and low prevalence and they are used for the suction of clean and not much dusty air. They are built in strong sheet steel painted, steel fan statically and dinamic equilibrated. Fluid temperature: up to 60°C in standard execution; special executions for higher ...

The compactness of the EGGERS PT 170 dynamometer is impressive and allows it to be accommodated in even in the most confined of workplaces. This dynamometer can be supplied as both a mobile workshop version as well as on an 80 km/h chassis. Boasting a performance range of up to 300 kW for a rapid test and 170 kW for a full-load curve, the PT 170 dynamometer already covers the majority of ...

Measurement of fuel consumption for mobile automotive measurement technology – For billing to the nearest liter, training sessions, driver training, vehicle comparison tests etc. The FCM - 100 is a fuel consumption meter developed to be installed in vehicles and stationary engines, and is the product of many years of experience spent developing semi-mobile fuel consumption meters for our ...

The FCS system-D-150 is an integrated system for the measurement of engines (diesel engines) with forward and return line for fuel supply with the fuel pump at the engine ...

The FCS system-D-190 is an integrated system for the measurement of engines (diesel engines) with forward and return line for fuel supply with the fuel pump at the engine (suction). The measuring range is 0.1 to 250l/h, and the output of the internal pump for fuel circulation is max. ...

PCE-DFG N 200 Digital Dynamometer for tensile force measurement and pressure force measurement up to 200 N / Very high accuracy / Sampling rate 1600 Hz / 6 different measuring tips / USB interface / Software / Calibration certificate A digital force gauge for tensile and compressive force measurements up to 200 N is available with the PCE-DFG N 200. The PCE-DFG N 200 is a digital force meter for ...

PCE-DFG N Digital Dynamometer for tensile force measurement and pressure force measurement up to 20 N / Very high accuracy / Sampling rate 1600 Hz / 6 different measuring tips / USB interface / Software / Calibration certificate. A digital force gauge for tensile and compressive force measurements up to 20 N is available with the PCE-DFG N 20. The PCE-DFG N 20 is a digital force meter for precise ...

Large range of test weights with DKD certificate (equivalent to SIT ...

Eaton offers packaged and customized solar power solutions for utility, commercial, and residential applications. Eaton’s complete solar solutions include DC switching and protection, solar inverters, AC switching and protection, customized packaging, and metering and monitoring. Our engineering team provides design, build, installation, and post-installation ...

Efficiency-optimized 6-cylinder SCANIA- SCHNELL in-line engine, User-friendly PLC control unit with touchscreen and remote monitoring, Durable double bearing synchronous generator, Exhaust heat exchanger made from high-grade stainless steel, Common rail injection system with SCHNELL control electronics, Compact, two-stage water air cooling, Enhanced effectiveness with TurboCompound ...

The 795+NLIA4 high-security cabinet is designed for storing lithium batteries, offering a robust and secure solution fit for industrial applications. Constructed from sheet steel with a thickness of 12/10th, the cabinet's inner body is built with melamine to enhance durability. It features two RAL 9005 black swing doors equipped with automatic closing mechanisms for improved safety. The cabinet ...

The ZX 300 Wind Lidar is a sophisticated remote sensing device endorsed with full IEC classification and recognized for finance-grade data collection by DNV. Engineered for comprehensive wind measurement applications, the ZX 300 captures high-precision, real-time wind data from altitudes ranging from 10 to 300 meters, making it indispensable for onshore wind resource assessments. This lidar is ...

The LOGR | Met Data Logger represents a cutting-edge advancement in solar and wind resource measurement, engineered to meet the rigorous demands of the renewable energy sector. This data logger is specifically designed for optimal performance in both pre-construction and post-construction phases of project development. By leveraging NRG's extensive experience in data logger design and ...