Flame Monitoring Equipment Supplied In Canada

The Quality flame arrestor is a safe device design to check and control the transmissions of the flame in the pipeline or ducts. It prevents flame from spreading with the help of internal arrestor element. It quenches and arrests flame by absorbing and dissipating its heat to below its flash ...

The TCI-60 is an environmentally friendly alternative to flaring. Combustion efficiency is 99.8% resulting in no smoke, no odor,and no visible flame during normal operations. This is a preferred method when operating in sensitive areas such as near residents. TCI products are also robust, simple to use and require very little ...

The TCI-500 is an environmentally friendly alternative to flaring. Combustion efficiency is 99.8% resulting in no smoke, no odor, and no visible flame during normal operations. This is a preferred method when operating in sensitive areas such as near residents. TCI products are also robust, simple to use and require very little ...

The TCI-1200 and 1200Plus are an environmentally friendly alternative to flaring. Combustion efficiency is 99.8% resulting in no smoke, no odor, and no visible flame during normal operations. This is a preferred method when operating in sensitive areas such as near residents. TCI products are also robust, simple to use and require very little ...

Self-monitoring and fail-safe burner control for the control of gas and oil burners as well as combined gas/oil burners of any ...

At Tornado, our detonation arrestors are the best solution to prevent the propagation of flame fronts back through lines and piping configurations (also known as a ...

Infratech gas waste incinerators and thermal oxidizers are designed to meet applicable emission and ground level concentration regulations. Our designs ensure a predictable Destruction Efficiency and substantially reduced auxiliary fuel consumption requirements. Our continuous duty gaseous waste incinerators/oxidizers are designed to suit specific waste streams, waste volumes and process ...

Our Peacock Oil Burners are designed to flare liquid hydrocarbons without liquid fallout or soot formation. These burners provide excellent service for well testing operations. When only oil is flared, a high-pressure air or gas source is required to provide additional mechanical atomization to ensure the mixture is a fine mist when it exits the burner nozzle which is designed to accept separate ...

Ship & Shore Environmental, Inc. provides innovative emission control solutions, focusing on their low NOx flares designed to achieve optimum emission reductions. These flares offer a reliable answer to emission regulations, ensuring ultra-low emissions of NOx, CO, and unburned hydrocarbons with over 99.99% destruction efficiency. Significantly, this performance is maintained at minimal cost and ...

The BGR Cube is a highly versatile, low cost vapour combustor designed to destruct volatile organic compounds (VOCs) and BTEXs produced from casing gas, pneumatic devices, or storage tanks. The BGR Cube eliminates the need to install expensive vapour recovery units (VRU) or uneconomical incinerators that provides an economical alternative to venting or ...

The TCI-3000 is an environmentally friendly alternative to flaring. Combustion efficiency is 99.8% resulting in no smoke, no odor, and no visible flame during normal operations. This is a preferred method when operating in sensitive areas such as near residents. TCI products are also robust, simple to use and require very little ...

The TCI-4000 is an environmentally friendly alternative to flaring. Combustion efficiency is 99.8% resulting in no smoke, no odor, and no visible flame during normal operations. This is a preferred method when operating in sensitive areas such as near residents. TCI products are also robust, simple to use and require very little ...

Design flow rate of 5MMscfd. “Line Heater vessel size 48” OD x 20’-0. Line Heater duty 1.25 MM Btu/hr. Inlet spool and Pre-Heat Coil MAWP 31000 kPag @ 172 deg C (CA=0mm). Pre-heat Coil & Pressure Vessel V-115 registered for Alberta, Saskatchewan and British. Columbia. Pre-heat coil 4” XXH sch (8 passes). ACL-5500 Burner Management System, B149.3, CSA Class 1 Div 1. ...

Infratech gas waste incinerators and thermal oxidizers are designed to meet applicable emission and ground level concentration regulations. Our designs ensure a predictable Destruction Efficiency and substantially reduced auxiliary fuel consumption requirements. Our continuous duty gaseous waste incinerators/oxidizers are designed to suit specific waste streams, waste volumes and process ...

The Pit Flare (or “Burn Pit”) is usually constructed of an excavation lined with a non-combustible lining of rock or refractory material. Often coupled with a pit liner, our pit flares can be a cost-effective combustion option for an environmentally conscious user. Our high efficiency burner produces a mixture of vapor and liquid from a single source. While most often designed to ...

Utility flares (DU series) are one of the most common flare designs use for applications with no smokeless burning requirements. They are also utilized in applications where smokeless flaring can be achieved without the use of an additional assist ...

We design Enclosed ground flares when waste gases are requested to be flared in an enclosed stack, with reduced flame visibility, minimal heat and noise, emissions sampling, ease, and smokeless combustion, in sensitive areas. The stack is internally refractory lined, designed for low and medium flows, has high destruction efficiencies relative to an open flare and designed as natural draft or ...

The TCI-2000 is an environmentally friendly alternative to flaring. Combustion efficiency is 99.8% resulting in no smoke, no odor, and no visible flame during normal operations. This is a preferred method when operating in sensitive areas such as near residents. TCI products are also robust, simple to use and require very little ...

The TCI-80 is an environmentally friendly alternative to flaring. Combustion efficiency is 99.8% resulting in no smoke, no odor,and no visible flame during normal operations. This is a preferred method when operating in sensitive areas such as near residents. TCI products are also robust, simple to use and require very little ...

The Lime Kiln Flame Monitor Dual-Eye Camera system is a durable monitor system of the highest quality. The system serves as a tool to improve process surveillance and allow its operators to actively participate behind the wall. The system is operations secure and service friendly. The benefit of a dynamic and automatic Dual-Eye tempereture controlled fire place camera is monotoring combustion ...