Fuel Flow Monitoring Equipment & Supplies In Latin America

The ALV10 is an air-fuel ratio controller designed to improve combustion efficiency and reduce emissions in industrial engines. It utilizes a precise control algorithm to adjust the air-fuel ratio in real-time, ensuring optimal combustion under all operating conditions. The ALV10 can be easily integrated with existing engine control systems and features a user-friendly interface for easy ...

The Continental Controls Corporation's VI200 is a versatile, microprocessor-based air-fuel ratio controller that can be used in a variety of combustion systems. It is designed to provide precise and accurate control of the air-fuel ratio, which can help improve fuel efficiency, reduce emissions, and extend equipment life. The VI200 is compatible with a wide range of sensors and actuators, and ...

The CCC Catalyst Monitor by Continental Controls Corporation is a centralized control system that allows for multiple inputs (O2 Sensor, NOx Sensor, Cat dP, Cat Temperature), and outputs enabling optimal performance when combined with CCC ECV5 air-fuel ratio control valve and an NSCR or Oxidation catalysts. Acting as a central communication hub, it integrates inputs and outputs for various ...

The AGV50 is a compact and efficient air-fuel ratio controller for industrial gas engines from 5,000 bhp to 38,750 bhp. It offers advanced electronic control to adjust the fuel flow and air-fuel ratio based on engine load and gas quality, resulting in better engine efficiency and reduced emissions. The AGV50 is easy to install and compatible with a variety of carburetors and mixers. It can be ...

CCC's Electronic Gas Carburetor (EGC) precisely controls the air/fuel ratio using variable pressure control combined with an advanced and improved mixing venturi. CCC offers an innovative and state-of-the-art approach to Gaseous Fuel Carburetion for most gas engines in the range of 10 to 500 horsepower. The EGC provides built-in control for a wide band Oxygen sensor that is in the exhaust ...

The GV2 by Continental Controls Corporation is an electronic fuel control valve designed specifically for small to midsized gas engines. It offers advanced electronic fuel control to allow fuel flow ranges that include LHV/Low BTU flare gas, biogas, and landfill gas. The GV2 features a servo-coil actuator, making it fast and smooth acting with low maintenance and high MTBF. It also offers ...

The AGV10 is a compact and efficient air-fuel ratio controller for industrial gas engines. It offers advanced electronic control to adjust the fuel flow and air-fuel ratio based on engine load and gas quality, resulting in better engine efficiency and reduced emissions. The AGV10 is easy to install and compatible with a variety of carburetors and mixers. It can be used with alternative fuels ...

Eliminate down time due to cold hydraulic fluid. Arctic Fox has a variety of products to keep hydraulic fluid flowing and reduce pump cavitation and blown ...

Series 140 engine is a high-performance, high-speed engine with full intellectual property rights developed by Jichai and AVL, featuring high pressurization, low energy consumption, high reliability, and long service life. It can meet the TIER2 and European ? emission standards, Widely used in oil vehicle drilling rigs, oil specials, wellsite generator sets, mobile power stations or backup power ...

Waukesha 275GL+ represents the most advanced generation of high-horsepower engines in the gas compression segment. A combination of robust construction and innovative technology, the 275GL+ lean-burn engine delivers excellence in fuel flexibility, efficiency, power output and emissions for unmatched performance. For maximum uptime and profitability, you can depend on the 275GL+ to get the job ...

The Circulatic® Watertube Steam Generator is a forced recirculation watertube boiler that uses a drum as a steam separator and a reservoir of water to supply the coils. A recirculating pump draws the water from the drum and forces it through a set of parallel connected coils at the rate of 3 to 4 times the maximum steaming rate. The hot gases envelop the entire tube surface to achieve very ...

GuardMagic FSM2/1 is a compact universal GSM/GPRS module for wireless monitoring the status of stationary remote objects: fuel storage tanks, fueling station, diesel generators, pumps refrigerators, etc. ...

The KW 1500GSM was designed to meet the tough diesel fuel cleanliness requirements of todays engine manufacturers. This system utilizes an industrial grade SCADA monitoring system incorporated into our interface controller. The combination of our highly efficient filters and interface allows the polishing system to remove contaminants, sludge and water to meet SAE and ISO fuel ...

MIRATECH RX Series housing is a high-value catalyst-silencer combo unit for engines in the 200 to 8,000 hp range. The standard silencer housing is constructed with a double wall carbon steel shell and is coated with high temperature black ...

The ACL Forced Draft CSC400-FD Combustion Safety Controller is a leading edge burner management system which provides burner ignition and air/fuel ratio control for forced draft burner applications. It monitors three separate thermocouple inputs that can be used for temperature control in process applications such as tanks, heater/treaters, fired separators, line heaters, re-boilers or any other ...

Polyethylene tank for Diesel fuel and gasoline transport, in exemption from ADR according to paragraph 1.1.3.1.C. Carrytank® 330 is a tank made in linear polyethylene designed for Diesel fuel transport; it is equipped with the following fittings: reinforced lockable lid, filling aluminium plug with integrated air vent device, level indicator, inline filter, fuel transfer unit, automatic fuel ...

Blending, Fuel Blending gas engine control system is designed for gas engines used in applications where the energy quality of the fuel supply is variable, but where the customer wants to be able to supplement “Fuel 1with Fuel 2”. The Fuel Blending system combines natural gas with other fuels, adjusting the fuel mix continuously during engine operation to achieve desired power outputs ...

TheHotLine electric In-Line Fuel Warmer can liquefy gelled or frozen diesel fuel in just 3 to four minutes, using only 2% of available battery capacity BEFORE you start the engine. If a power loss is noticed due to filter plugging while in operation, all it takes is a simple flip of a switch on the dashboard, and within 60 seconds the HotLine will begin eliminating the fuel waxing that is causing ...

Hedland petroleum fluid meters are designed to seamlessly integrate into hydraulic systems. Additionally, with a variety of end fittings and different material types, these meters can be used in a wide range of industrial processes requiring flow monitoring of petroleum fluid types. Standard meters provide an economical solution for operators needing a quick, visual indication of flow, without ...

Polyethylene tank for Diesel fuel transport in exemption from ADR - paragraph 1.1.3.1.C. Compact and light, manufactured in roto-molded linear polyethylene, Carrytank 440 is equipped with the following fittings: filling plug, air vent device, fuel transfer unit, integrated forklift pockets (full tank), handles for lifting and carrying (empty tank) and integrated recesses for securing with ...