Petroleum Testing Equipment & Supplies In Latin America

The SpectrOil M/F-W has become the standard instrument when on-site and immediate fuel analysis is a necessity. It fulfills the requirements of ASTM D 6728, Standard Test Method for Determination of Contaminants in Gas Turbine and Diesel Engine Fuel by Rotating Disc Electrode Atomic Emission ...

Besides our wide range of ready made oils and fuel standards we offer to have your special blend or your special single element standard manufactured to your requirements. We co-operate only with experienced special producers of oil reference materials. Thus your standard comes with the same internationally acceptable certificate stating analytical method, uncertainty and traceability to a ...

1-Butene is a colorless, flammable, liquefied gas with a slight aromatic odor. It is shipped as a liquid under its own vapor pressure. It is part of the alkene group of hydrocarbons. They serve as intermediates in the preparation of a variety of organic compounds. Its main application is as a comonomer in the production of certain kinds of polyethylene, such as linear low-density polyethylene ...

Produced as a generally minority fraction, we can produce the different C4s (1-Butene, 2-Butenes, isobutene, butadiene) depending on the resin blends to be processed, including elastomers which favor their production. They are used in the manufacture of a wide range of polymers and chemical ...

Fluid Catalytic Cracking Units (FCC Cyclones) are the principal technologies that enable the critical process within heavy oil refining of converting the heavy oils into more valuable gasoline and lighter products. More than half of the refinery's heavy petroleum is processed through the FCC Cyclones, and the FCC Cyclones are also an important source of butene and pentene olefins used in refinery ...

Refinery Systems provides octane and diesel equipment and services for laboratory and on-line applications. We have 47+ years of service experience in the Petroleum Industry. Our operations globally provide laboratory, on-line analysis systems, accessories and services. Core Laboratories is the largest worldwide distributor of Waukesha CFR octane and cetane rating engines, parts, and ...

The model FIT (Fuel Ignition Tester) is a desktop analyzer designed to rate derived cetane number. The FIT conforms to ASTM D7170 and IP method #PM-DI-05 to provide automated analysis of diesel fuel DCN. The analyzer is easy to use, compact and robust with a simple computerized operator interface. Maintenance of the FIT is ...

Icon's Distillation analyser measures boiling points or ranges of petroleum production in the light to middle distillate ...

Product Name: 1,4-Butanediol CAS: 110-63-4 MF: C4H10O2 MW: 90.12 EINECS: 203-786-5 Melting point: 16 °C (lit.) Boiling point: 230 °C (lit.) Density: 1.017 g/mL at 25 °C (lit.) Vapor density: 3.1 (vs air) Vapor pressure: <0.1 hPa (20 °C) refractive index: n20/D 1.445(lit.) Fp: 135 °C storage temp.: Store below +30°C. Pka: 14.73±0.10(Predicted) If you have a need for our products or have any ...

The compressor adopts multi-stage compression modular design, air-cooled cylinder, and oil lubrication. The compressor is designed, manufactured and tested in strict accordance with GB/T12928-2008 "Marine Medium and Low Pressure Piston Air Compressor" and GB/T12929-2008 "Marine High Pressure Piston Air Compressor". Our maximum pressure reaches 50MPa, and our compressors can be used for air, ...

As per IS 335 for transformer oil with inside dimension 12" x 12" x 14" thermostatically controlled with air circulation arrangement complete with 4 nos. 400 cc beakers thermostatically controlled. With digital controller. With contact thermometer & ...

Method A, Method B, Method C, Method D, Method A: Aniline point apparatus as per IP 2 & IP 1448(P-3), ASTM D-611 method A complete with jacket without ...

The model F-1/F-2 Combination CFR engine is used to determine the octane quality of gasoline and fuel blending components. This unit is recognized and approved by ASTM D2699 and D2700. This unit is equipped with a heavy duty CFR-48D type crankcase, variable compression cylinder, carburetor with adjustable fuel to air ratio, and knock measurement ...

The MOGAS T-Series trunnion-mounted ball valve is available in either metal-seated and soft-seated from 3 to 60 inch, and two- or three-piece designs, with operating temperature from -50° F to 400° F (-45 to 204° C). The valve retains many of the time-tested features of the C-Series, such as an actuator mounting pad, but with a trunnion design. Its reduced operating torque results in ...

Filtration apparatus assembly. This apparatus differs from the standard units as it utilizes our Instatherm technology to evenly heat the upper 500mL filter funnel, thus keeping the viscous material such as polymers in the liquid state. The middle adapter and snap ring are PTFE. The interchangeable fritted disk is in the, 20 to 50 Micron range. The entire assembly can be taken apart for cleaning ...

Hedland petroleum fluid meters are designed to seamlessly integrate into hydraulic systems. Additionally, with a variety of end fittings and different material types, these meters can be used in a wide range of industrial processes requiring flow monitoring of petroleum fluid types. Standard meters provide an economical solution for operators needing a quick, visual indication of flow, without ...