Power Testing Equipment Supplied In Europe

Special fibers support applications in high-temperature and high-vacuum areas and also withstand aggressive substances. The new CeramOptec® AL-Fibers are provided with a hermetically sealed metal coating made of aluminum and are thus protected against the penetration of liquids and gases. They are suitable for operating temperatures between -196°C and +400°C, do not outgas even under ...

High reliability with guaranteed 0 to +5W power output tolerance. Passing mechanical load test of 5400 Pa to withstand heavier snow load and 2400 Pa to withstand wind pressure. Compact and durable frame, easy to install. High transparency tempered glass: 3.2 mm, with resistant glass surface. Excellent performance under different light conditions. Power range from 250 to 270 W to meet the ...

Teseq’s new NSG 3060A conducted immunity generator takes the proven, user-friendly design of the highly successful NSG 3000 series to a new level. This innovative design uses modular architecture to provide a versatile system that can be configured for basic testing needs and expanded to meet the needs of sophisticated test ...

The NSG 1007 series sources are high efficiency, lightweight AC and DC power sources which include high performance power analyzers. With a crest factor of up to 5:1, the NSG 1007 series sources can drive difficult nonlinear loads with ease. Since many modern products use switching power supplies, they have a tendency to draw high repetitive peak currents. The Teseq sources can deliver a ...

Dimensions : 1650mm / 992mm / 35mm. Module Type: YL295P-29b (1500V), with peak power of 295W. YL290P-29b (1500V), with peak power of 290W. YL285P-29b (1500V), with peak power of 285W. YL280P-29b (1500V), with peak power of 280W. YL275P-29b (1500V), with peak power of 275W. YL270P-29b (1500V), with peak power of 270W. Independently tested for proven product quality and long-term reliability. ...

FAR Part 25 App F Part II, AITM 2.009, BSS 7303, FAA Handbook Chpt 12 AC 135. The Seat Cushion Test Equipment complies with FAA part 25 Appendix F part ...

BAMFIT (Bondtec Accelerated Mechanical Fatigue Interconnection Test) is a completely new test method for estimating bond life and reliability of heavy wire wedge bonds. It is the perfect extension of the classic Power Cycling Test (PC): the cyclic stress of the wire bond due to temperature cycling is replicated by mechanical stress, but with significantly higher cycle speed. This allows PC ...

Combined power unit FCA-90/AR-600A consists of frequency converter 400 Hz and 28 V rectifier. The unit is designed to supply aircafts and helicopters during preflight maintenance at the airport. It can also be used as a power unit of test benches, hangars and aircraft manufacturing plants. Can be manufactured both in standard complete set and according to Customer’s special requirements and ...

Airport rectifiers are designed to supply aircrafts and helicopters during preflight maintenance at the airport. They can also be used as a power unit of test benches, hangars and aircraft manufacturing plants. AR is intended to supply all types of aircrafts and helicopters with 28,0 /28,5 V. Could be manufactured in a mobile and stationary ...

No. of cells and connections: 60. Dimension: 1650x992x40mm. Net Weigh!: 18.3KG. IP: ...

No. of cells and connections: 72. Dimension: 1966x992x50mm. Net Weight : ...

The 2500 is “the load bank of choice”, as they provide the right mix of high capacity, transportability, ease of use, and reliable Avtron construction. ...

The Avtron 5500 Load Bank is a trailer mounted unit to be used when 500kW load is required. ...

The GE+ vAC/DC Full is the most complete and flexible Voltage Source that allows full operations and power for AC and DC Test Platforms. Generation of Worldwide electrical grids, Generation of disturbances, harmonics generation and power amplifier are some of the key features of its Regenerative and Bidirectional power hardware. This product is an essential laboratory device for testing and R&D ...

The Compact Line is designed meeting the requirements of the so called “lean production”, with a specific attention to the requirements of the production environments of electronic boards. It is ergonomically sophisticated and technologically competitive, offering the highest flexibility, high measurement accuracy, high test speed, in small spaces and minimum footprint with limited ...

Ground power units 400Hz or 28V 600Amper are developped for our clients especially in airports. We as Mak Plus Power Systems produce aircraft ground power units gpu 400Hz 28 V DC in Germany for aircrafts and air vehicles. The 400 Hz air vehicles energy units are produced to start helicopters and planes and used in airports with protection of IP33 class or more in Germany for your usage also with ...

The RWB Mobile Operation Trolley is ingeniously designed to provide versatile engine support capabilities for both loaded and unloaded operations on power test beds. It features a robust construction that ensures stability and minimal sensitivity to vibration, enhancing the precision of your engine tests. This modular and reusable system can be tailored to various engine configurations, making it ...

Our loadbank testing will make sure your power won’t let you down when you need it most. Loadbanks are used to test electrical power supplies. They simulate variable electrical load conditions in a way that can be accurately controlled, measured and recorded. It’s vital to test your systems so you know they’re up to the job – whether you’re commissioning new ...

Introducing the new High Accuracy (0.045%) Vitrek PA PA910 Precision Harmonic Power Analyzer, the newest additions to Vitrek’s family of Power Analyzer products. The new PA910 is the most powerful, accurate and flexible power analyzer available on the market today available with 0.045% power accuracy. These new products provider faster sampling rates, bandwidth performance and greater ...

Max. motor power: 100 kW. Tested range / max. range: 90 / 100 km. Battery capacity: 37 kWh. Charging time (AC / DC): 6 h / ~ 1 h. Charging power (AC / DC): 6,6 / 50 kW. Payload chassis: 1580 kg. Wheelbase min. – max.: 3000 – 3750 mm. Gross vehicle weight: 3500 kg. Base vehicle: Iveco Daily. Availability: available ...