Energy Monitoring Equipment & Supplies In Latin America

The ALV10 is an air-fuel ratio controller designed to improve combustion efficiency and reduce emissions in industrial engines. It utilizes a precise control algorithm to adjust the air-fuel ratio in real-time, ensuring optimal combustion under all operating conditions. The ALV10 can be easily integrated with existing engine control systems and features a user-friendly interface for easy ...

Based on infrared gas absorption analysis method, TVAS-5000 calorific value analyzer adopts intelligent digital processing technology to realize the analysis process of gas concentration value and calorific value in gas. It has the characteristics of high degree of automation, strong function, easy operation and digital ...

Cell sensing: Single Cell SC (1C). Contact design: 0.5 mm spring wire with S-shape. Contact bearing: In PCB on one side with redundant contact pin. Locking type: Friction lock in pinhole, additional hold-down possible. Contact pitch min.: 0.950 mm. Pinhole/ Geometry: Pin shape punched in bipolar plate foil. Bipolar plate material: Metal. Connection type: Flexcard. Benefit (USP): Smallest cell ...

For the commissioning and testing of cell voltage measurement electronics and FuelCell control units, and in particular for the software testing of such ECUs, it is necessary to simulate cell-specific voltage values. The simulation modules of the MCM IntelliSim series, in conjunction with a master module enable active simulation of a fuel cell stack without the need to integrate a real stack into ...

Deep Cycle Battery, 24 Volt, 1200 Ah (at 20 hr.). Some 24 Volt batteries do not come with a cover, the image is for illustration purposes ...

Mast version (GS1/M-10) – includes one metre pole and bubble level. Fitted with 10m cable. Floor version (GS1/F-10) – with integrated levelling baseplate. Fitted with 10m ...

The Continental Controls Corporation's VI200 is a versatile, microprocessor-based air-fuel ratio controller that can be used in a variety of combustion systems. It is designed to provide precise and accurate control of the air-fuel ratio, which can help improve fuel efficiency, reduce emissions, and extend equipment life. The VI200 is compatible with a wide range of sensors and actuators, and ...

The NOXmatic comprises the most up-to-date quality gas are technology ensuring the safe, efficient and environmentally friendly combustion of gases from landfill, bio and sewage gas systems. Depending on the application parameters and the required combustion characteristics, the ares are supplied as either low or medium temperature units supplied with the required additional burner technology. ...

The CVM systems with MASTER feature comprehensive functionalities and high-speed data transmission and processing. A complete system consists of the number of CVM G5 measuring modules required for the respective application, a bus module, a termination module and a process module. Adding the process modules Master or SlimMASTER to the measurement module stack enables more comprehensive as well as ...

Power supply 100...240 Vac (47...63 Hz). Output 24V/0.625A (maximum 15W). Constant voltage, current limited. Continuously short circuit proof. Interchangeable plugs (Euro, UK, USA, Australian, IEC) for mains connection. 8Dinconnector for instrument connection. Cable length 2 m. ...

Our high performance 100 H.P. model features a John Deere turbocharged 4 cylinder diesel and pressure compensated hydraulic pump. It is designed to drive our larger submersible pumps or other hydraulic equipment requiring flows to 53 GPM and pressures to 2500 ...

Delta-T - Model ES2-05 - Solar Energy Flux Sensor (5m ...

Deep Cycle Lead Acid Battery with Removable Cover, 24 Volt, 960 Ah (at 20 hr.). Some 24 Volt batteries do not come with a cover, the image is for illustration purposes ...

The CVM solution CVM Ex is aimed at cell voltage monitoring in stationary applications. Important features are the explosion protection, which is realised by housing the measuring modules in an Atex-certified enclosure, as well as the modular design, which enables high scalability and individual customer ...

Electrode boilers utilize the conductive and resistive properties of water to carry electric current and generate steam. An A.C. current flows from an electrode to one phase to the ground using the water as the ...

The FDM 6000 is a portable, battery operated fuel dilution meter that determines the concentration of fuel dilution present in an oil sample within a matter of minutes. The FDM 6000 uses a unique patent pending fang design to pierce the cap of a disposable sample vial and draws in the headspace from the vial. The headspace flows over a SAW (Surface Acoustic Wave) sensor which reacts specifically ...

With test systems for Fuel Cell Control Units (FCCUs), developers can test the electronic components of fuel cell or battery systems without needing a real system. An essential component of the systems we develop for our customers is therefore cell voltage simulation (CVS). In addition to the cell voltages, the relevant environmental parameters are also ...

The Wager explosion-resistant and dust-proof Viewports consist of a PYREX plate glass mounted to an aluminum frame and attached to the outer boiler casing. These Viewports may be used alone or in conjunction with the Wager Boiler Inspection Light. The Boiler Inspection Light and the Viewport have both been approved for installation aboard USN and USCG vessels for Oil Drip Detection on ...

BGEm by ELI BioScience is a unique blend of methane forming bacteria called acetolactic methanogens as wall as hydrogen oxidizing methanogens. These microbes have been Isolated and stabilized in BGEm for their effectiveness to convert acetate and methyl to methane. Hydrogen oxidizing methanogens aid in producing hydrogen ions which react with available carbon dioxide to increase methane ...

Our specialized media is used to detect microorganisms in diesel fuel specifically. This type of culture media is designed to monitor microbial contamination in fuel, which can result in sludge buildup, fuel degradation, and potential damage to storage tanks and engines. It is used in industries that require clean fuel systems, such as automotive, marine, and aviation, where microbial ...