Energy Monitoring Equipment & Supplies In Solomon Islands

The ALV10 is an air-fuel ratio controller designed to improve combustion efficiency and reduce emissions in industrial engines. It utilizes a precise control algorithm to adjust the air-fuel ratio in real-time, ensuring optimal combustion under all operating conditions. The ALV10 can be easily integrated with existing engine control systems and features a user-friendly interface for easy ...

A cell contacting unit CVP (Cell Voltage Pickup) is a multichannel potential tap for detecting cell voltages on batteries or fuel cell stacks. Depending on the stack used, different construction principles are employed. The CVP pictured here is just one ...

With the MCM-I08AII-BI module, currents are measured synchronously on eight channels. The individual measuring channels are galvanically decoupled from each other, individually configurable and each equipped with integrated signal ...

Cell scanning: Single Cell SC (1C). Contact design: 0.4 mm spring wire with W-shape. Contact bearing: In printed circuit board two-sided. Interlocking type: Vertical-Pressure-Lock. Contact pitch min.: 1.200 mm. Pinhole/ Geometry: Pinslot rectangular, 1 mm depth. Bipolar plate material: Metal. Connection type: Wired. Benefit (USP): Extremely flat design („installation space neutral CVP ...

The CVM measurement modules for precise cell voltage measurement on fuel cells, batteries and electrolyzers have proven themselves hundreds of times and deliver reliable measurement results even in harsh field conditions. Thanks to a variety of interfaces, they can be used excellently with common PC systems as well as in embedded systems. For processing the measurement signals and combining them ...

The BEAM 3.0 perform in 24/7 production process worldwide with utmost reliability. Even under the most challenging environments BEAM 3.0 guarantee frictionless industrial use for different applications (example: 3D Laser Printer / 3D Laser melting). The Generator produces a continuous flow of Nitrogen with Laser Grade. The BEAM 3.0 has been developed to meet specific requirements in term of gas, ...

The MCM-U08 AII module is ideal for measuring unipolar voltages in test benches and test systems. Use the module to monitor the voltage of the fuel cell, battery stacks, lithium-based batteries and electrolyzers. It is optimally equipped for use in harsh environments. Application areas include starter test benches, engine test stands, generators test stands, HIL systems and test benches for ...

Voltage regulator: None - Signal direction: Positive only (+). The Senstech signal amplifier simplifies the evaluation of the sensor signals and makes them less sensitive to interference. The gain is matched to the measuring range of the sensors – either in positive load direction or in both directions, depending on the variant. The amplifier module is available with integrated voltage ...

Deep Cycle Battery with Cover, 24 Volt, 240 Ah (at 20 hr.). Some 24 Volt batteries do not come with a cover, the image is for illustration purposes ...

For the commissioning and testing of cell voltage measurement electronics and FuelCell control units, and in particular for the software testing of such ECUs, it is necessary to simulate cell-specific voltage values. The simulation modules of the MCM IntelliSim series, in conjunction with a master module enable active simulation of a fuel cell stack without the need to integrate a real stack into ...

Deep Cycle Battery with Cover, 24 Volt, 408 Ah (at 20 hr.). Some 24 Volt batteries do not come with a cover, the image is for illustration purposes ...

The process modules add numerous functions to the CVM systems from SMART TESTSOLUTIONS. They offer synchronous data rates of up to 400 x 1 kHz per channel via the LVDS bus, a high-speed connection to the PD via Ethernet and bus interfaces (EtherCAT, CAN, ...

The CVM solution CVM Ex is aimed at cell voltage monitoring in stationary applications. Important features are the explosion protection, which is realised by housing the measuring modules in an Atex-certified enclosure, as well as the modular design, which enables high scalability and individual customer ...

The EGC6 is a highly efficient electronic gas carburetor designed for industrial and power generation engines. It can operate on a wide range of gaseous fuels, including biogas and low BTU gas, and has advanced electronic fuel control capabilities to precisely regulate fuel flow. The EGC6 is easy to install and can be adapted to a variety of AFR controls and carburetors, making it a versatile ...

The SAT-1 is a tower light stack with an audible alarm that may be used to indicate various states of operation when connected to OS-4, OS-6, C-30ZX, EE-2, OEM-1, OEM-2, and UV-100. The indicator lights and audible alarm are controlled by relay contact closure. The SAT-1 has interchangeable stacking light modules that may be customized after purchase. The SAT-1 can be mounted on new OS-6 in our ...

Low nitrogen oxide combustion technology is to improve the combustion equipment or control the combustion conditions, using a variety of combustion means in the furnace to control the production of NOx in the combustion process, in order to reduce the NOx in the tail gas of the combustion ...

Deep Cycle Battery, 24 Volt, 1200 Ah (at 20 hr.). Some 24 Volt batteries do not come with a cover, the image is for illustration purposes ...

Whether you are building a new facility or updating an existing one, there are a myriad of safety decisions to make. One decision, however, is now crystal clear. To best protect your workplace and employees, choose the 7800 Controller. Five simple function buttons make configuration and setup of the 7800 Controller easy and intuitive. Built-in programming flexibility allows you the ability to ...

The MCM-EVA combines several functions in one module: 8-channel multiplexed voltage measurement, 4-channel auxiliary relay for controlling the main relay terminal 15 or similar, 2x 40pin. Mezzanine expansion slots for plugging of customer- or application-specific modules Piggy, Patch ...

Deep Cycle Battery with Cover, 24 Volt, 240 Ah (at 20 hr.). Some 24 Volt batteries do not come with a cover, the image is for illustration purposes ...