Energy Monitoring Equipment & Supplies In Mississippi

The ALV10 is an air-fuel ratio controller designed to improve combustion efficiency and reduce emissions in industrial engines. It utilizes a precise control algorithm to adjust the air-fuel ratio in real-time, ensuring optimal combustion under all operating conditions. The ALV10 can be easily integrated with existing engine control systems and features a user-friendly interface for easy ...

Deep Cycle Battery, 24 Volt, 1200 Ah (at 20 hr.). Some 24 Volt batteries do not come with a cover, the image is for illustration purposes only. ...

Cell sensing: Single Cell SC (1C). Contact design: 0.5 mm spring wire with S-shape. Contact bearing: In PCB on one side with redundant contact pin. Locking type: Friction lock in pinhole, additional hold-down possible. Contact pitch min.: 0.950 mm. Pinhole/ Geometry: Pin shape punched in bipolar plate foil. Bipolar plate material: Metal. Connection type: Flexcard. Benefit (USP): Smallest cell ...

The G6S CVM solution was specially developed for cell voltage monitoring in series applications. It is scalable, allowing both single cell measurements and voltage measurements across two or four cells. The measurement modules are supplemented by a target market-specific head module, which is equipped with the data interfaces prevalent in the respective target market. The head module also offers ...

Cell scanning: Single Cell SC (1C). Contact design: 0.4 mm spring wire with W-shape. Contact bearing: In printed circuit board two-sided. Interlocking type: Vertical-Pressure-Lock. Contact pitch min.: 1.200 mm. Pinhole/ Geometry: Pinslot rectangular, 1 mm depth. Bipolar plate material: Metal. Connection type: Wired. Benefit (USP): Extremely flat design („installation space neutral CVP ...

The SAT-1 is a tower light stack with an audible alarm that may be used to indicate various states of operation when connected to OS-4, OS-6, C-30ZX, EE-2, OEM-1, OEM-2, and UV-100. The indicator lights and audible alarm are controlled by relay contact closure. The SAT-1 has interchangeable stacking light modules that may be customized after purchase. The SAT-1 can be mounted on new OS-6 in our ...

Test Procedure: Place the colored end down into the test tube. Add questionable liquid. As little as 0.1% DEF will turn the strip green and the same 0.1% water will give the same reaction. At 1% DEF the strip will begin to turn BLUE in a few ...

The ELSB (Electric Steam Boiler) is a highly efficient, electrically heated steam generator for 350 to 7,500 kg/h steam at up to 24 bar. When operating with green energy, the boiler allows your company to achieve a CO2-neutral steam supply. Generate up to 7.5 t/h steam in a highly efficient way using just electricity – no combustion, no emissions. High steam quality, excellent dynamics, ...

The MCM-U08AII-BI module is ideal for measuring bipolar voltages in test systems and test systems. Use the module to monitor the voltage of the fuel cell, battery stacks, lithium-based batteries and electrolyzers. It is optimally equipped for use in harsh environments. Application areas include starter test benches, engine test benches, generators test stands, HIL systems and test benches for ...

The second biggest model in our medical range is the i8-M700. The machine was designed to outperform any other incinerator within its class. This model gives you the size, performance and flexibility to to expand if and when your waste stream does. Proven in many demanding situations and climates, it is being used as the primary waste solution by large medical facilities, health clinics and ...

Cell scanning: Single Cell SC (1C). Contact design: 2mm MultiLam. Contact bearing: In housing body, floating. Interlocking type: Positive Lock in plastic body. Contact pitch min.: 2.000 mm. Pinhole/ Geometry: Rectangle 2x2 mm. Bipolar plate material: Graphite. Connection type: Wired Benefit (USP): Commercial contact with very good availability. Robust design. Application: Series application, ...

The Wager Inspection Light and Viewport are designed to be used in conjunction with one another so that one may observe any fuel line leaks between inner and outer casings of water tube boilers or may see any leaks at hand hole plates on steam headers. The Wager explosion-proof and dust proof Inspection Lights consist of an explosion resistant globe which is inserted into the outside boiler ...

Deep Cycle Battery with Cover, 24 Volt, 408 Ah (at 20 hr.). Some 24 Volt batteries do not come with a cover, the image is for illustration purposes ...

The CCC Catalyst Monitor by Continental Controls Corporation is a centralized control system that allows for multiple inputs (O2 Sensor, NOx Sensor, Cat dP, Cat Temperature), and outputs enabling optimal performance when combined with CCC ECV5 air-fuel ratio control valve and an NSCR or Oxidation catalysts. Acting as a central communication hub, it integrates inputs and outputs for various ...

Deep Cycle Battery with Cover, 24 Volt, 240 Ah (at 20 hr.). Some 24 Volt batteries do not come with a cover, the image is for illustration purposes ...

The model CEJS High Voltage Electrode Steam Boiler is the proven leader with more hours of operating experience over a wide range of applications than any competitor. The CEJS electrodes are vertically mounted around the inside of the pressure vessel which enables the CEJS to produce maximum amounts of steam in a minimum amount of floor ...

With the MCM-K16DBI-10A module, up to 16 signal channels can be switched in each case to the two signal outputs. By the use of the relay, the individual channels are electrically isolated from each other. The module is ideal for switching signals in test systems and test systems. The module is suitable for switching of average currents, as they occur in various amplifiers in engine control ...

A cell contacting unit CVP (Cell Voltage Pickup) is a multichannel potential tap for detecting cell voltages on batteries or fuel cell stacks. Depending on the stack used, different construction principles are employed. The CVP pictured here is just one ...

Cell sensing: Single Cell SC (1C). Contact design: 0.5 mm spring wire with 1/2 A-shape. Contact bearing: In PCB on one side with redundant contact pin. Locking type: Vertical-Pressure-Lock. Contact pitch min.: 2.350 mm. Pinhole/ Geometry: Pinslot V-shaped, 0.8 mm depth. Bipolar plate material: Graphite. Connection type: Flexcard. Benefits (USP): Direct mechanical and electrical connection to the ...

Cell scanning: Double Cell DC (2C). Contact design: 0.5 mm spring wire with S-shape. Contact bearing: In PCB one side with redundant contact pin. Interlocking type: Friction lock in pinhole, additional hold-down possible. Contact pitch min.: 2.030 mm. Pinhole/ Geometry: Pin shape punched in bipolar plate foil. Bipolar plate material: Metal. Connection type: Flexcard. Benefit (USP): Design for ...