Energy Monitoring Equipment Supplied In Cyprus

One or two-channel barrier for the safe separation of 4...20 mA standard signal circuits. The RB223 passive barrier can be used to galvanically isolate active signal circuits (0 to 20 mA) in three applications: Transmission from non-Ex to Ex areas e.g for active adjusters, controllers or indicators, Transmission from Ex to non-Ex areas for connection of active, intrinsically safe circuits to the ...

ProSLS is a monitoring device that continuously monitors the leakage current of an SPD, which is the most accurate predictor of an SPD’s life status. Automatic adjustment to all SPD sizes and models. Continuously monitors leakage current of an SPD. Replaceable battery, lifetime up to two ...

Strikesorb 80 industrial surge suppression offers unparalleled lightning protection, protecting mission-critical applications from damage caused by lightning surges and other overvoltage events. Even in the most lightning prone environments, Strikesorb 80 lightning surge protectors are capable of absorbing and dissipating the extreme energy of lightning strikes without degradation to the ...

The BTU meter RH33 is used in applications with liquid energy carriers. It calculates the thermal energy of water acc. to EN1434, glycol/water mixtures or other fluids such as thermal oils. Temperature sensor matching using calibrated temperature sensors is done in the device. Potential for cost savings can be shown by using the software available as an accessory. The device has a custody ...

The solar panels deliver more power per square meter due to several design improvements. Introduction of three bus bars and improved contact between the cell and metal fingers, improves the electrical ...

Strikesorb 30-DRM SPDs protect mission-critical applications from successive overvoltage events. They are capable of absorbing and dissipating the energy of multiple electrical surges without degradation and integrate into most systems, mounting easily onto a DIN ...

Rayvoss M industrial surge protection systems are designed with Strikesorb 80 or Strikesorb 40 Surge Protective Devices (SPDs) inside. Offered in a variety of configurations, Rayvoss M can be customized to meet any customer’s electrical overvoltage protection ...

Heat pumps are the best choice for economical heating, hot water and air conditioning in new or existing homes, hotels, offices, shops and the use of geothermal energy. They fully replace petroleum in homes and buildings with radiators or underfloor heating and air ...

The MC range of flare stacks provides a combustion strategy which holds the gases at 1200oC for the specified retention time. This takes to its realistic limit this form of combustion control. The key to this form of technological solution is to raise the temperature of the combustion process to 1200oC and retain the combustion gases at this temperature for an extended period of ...

The LHC (Low Heat Content) Range flare is designed specifically to address the problem of combusting gases with low calorific values, or heat contents. The optimisation of combustion control techniques ensures that heat loss is minimised, whilst air and gas mixing is maintained at a very high level. In normal landfill gas flares, for example, the usual minimum methane concentration at which a ...

We are glad to present you with a range of solutions for lighting parks, streets, trails, monuments, squares, Buildings, etc. with the use of solar energy that operate independently without being connected to the network of the EAC and apparently without any electricity consumption, a zero-cost operation. These systems belong to the category of autonomous photovoltaic systems and can be ...

New energy is a leader in power electronics specializing in PV inverters, performance monitoring Systems and power supply systems for industrial rail applications. Continued growth will see KACO new energy Enter the emerging markets of energy storage systems and rural ...

Network reliability is a priority for electrical utilities. Supply interruptions add to maintenance costs and affect customer service. Substation faults are particularly expensive: equipment is often damaged and difficult to repair or replace, specialized post-fault maintenance may be required, and significant customer “supply” lost. Birds and animals often enter substations or ...

Rayvoss A industrial surge protection systems are designed with Strikesorb 80 Surge Protective Devices (SPDs) inside. Offered in a variety of configurations, Rayvoss A systems can be customized to meet any electrical overvoltage protection ...

Strikesorb 40 surge protection devices protect mission-critical applications from lightning surges and overvoltage events. Even in the most lightning prone environments, Strikesorb 40 surge suppressor modules are capable of absorbing and dissipating the extreme energy of lightning strikes without degradation to the module. Suitable for wind turbine surge protection as well as other ...

Strikesorb 30SPDs protect mission-critical applications from successive overvoltage events. Strikesorb 30 modules are capable of absorbing and dissipating the energy of multiple electrical surges without degradation to the ...

Rayvoss S industrial surge protection systems are designed with Strikesorb 40 Surge Protective Devices (SPDs) inside. Offered in a variety of configurations, Rayvoss S systems can be customized to meet any customer’s overvoltage protection ...

This breakthrough technology delivers a convenient, sustainable way to light your space with minimal investment and maintenance and substantial energy ...

Power supply for two 2 wire sensors or transmitters. The power supply has two galvanically isolated outputs for supplying voltage to sensors and transmitters. A built-in communication resistance enables bidirectional HART® communication with SMART sensors and ...

Power supply for one 4 wire sensor or transmitter. The power supply has one output for supplying voltage to 4 wire sensors and transmitters. Connection to mono-phased a.c. networks or to two phase conductors of three-phase supply networks (TN-, TT- or IT-networks as per VDE 0100 T 300/IEC 364-3) with 100-240 V AC nominal voltage ...